Arduino Sensors

SKU: DF-EDU0157-EN | Brand: DFRobot

The Lark Weather Station is a compact, all-in-one portable weather device that measures wind speed, wind direction, temperature, humidity, and air pressure. It supports real-time data output via I2C and UART, making i...

SKU: DF-SEN0586 | Brand: DFRobot

The LPB40B is a single-point ranging LiDAR sensor based on Direct Time-of-Flight (DToF) technology. It measures distances from 0.05 to 40 m on high-reflectivity targets, with ±5 cm accuracy across the full range. The ...

SKU: DF-SEN0591 | Brand: DFRobot

##Introduction With a measurement range of up to 3m, the RS485 ultrasonic obstacle avoidance distance ranging sensor offers advantages such as small blind zones (Measurement accuracy: 1 + (S * 0.3%) cm), narrow measur...

SKU: AF-6067 | Brand: Adafruit

The Adafruit LPS28 Pressure Sensor Breakout features the ST LPS28DFW — a barometric pressure sensor with an extended range up to 4060 hPa, far beyond the ~1260 hPa limit of most competing sensors. This makes it suitab...

SKU: AF-6062 | Brand: Adafruit

The Adafruit INA3221 breakout monitors current, voltage, and power on up to three independent power rails simultaneously over I2C. Each channel supports high or low-side measurement up to +26V DC at ±3.2A with ±1% pre...

SKU: SF-SEN-21276 | Brand: SparkFun

The Arducam 64MP Autofocus Camera Module brings smartphone-grade imaging to the Raspberry Pi ecosystem. With a 64MP sensor capable of capturing 9152 × 6944 still images and autofocus for sharp results, this module fit...

SKU: DF-SEN0545 | Brand: DFRobot

This smart rain sensor offers a fast way to detect rainfall change on glass in real-time free from effects like sunlight, dust, leaves, etc., and feeds back information (no rain, light rain, moderate rain, or heavy ra...

SKU: DF-SEN0481 | Brand: DFRobot

This magnetic switch (reed switch) consists of two magnetic reeds (usually composed of iron and nickel) sealed in a plastic case. The two magnetic reeds are overlapped but there is a small gap between them. When a sui...

SKU: DF-SEN0507 | Brand: DFRobot

Different from our previous liquid level sensors, this capacitive liquid sensor can be used to detect high-viscosity and low-corrosive liquids, such as glue, lubricating oil, grease, ink, engine oil, powder and other ...

SKU: AF-3397 | Brand: Adafruit

The Optomax is an optical liquid level sensor that detects the presence or absence of almost any liquid — oil or water based. Inside the polysulfone housing, an infrared LED and matching phototransistor work together:...

SKU: SF-SEN-18009 | Brand: SparkFun

The LIDAR-Lite v4 Qwiic from GARMIN is a high-performance, wireless optical distance measurement sensor that doesn't require any soldering to get started. This is the ideal solution for drone, robot, IoT, or unmanned ...

SKU: DF-DFR0830 | Brand: DFRobot

This sensor contains a metal ball that moves along its special internal structure on the effect of gravitation force so as to make a connection or disconnection. Therefore, it can be used as a simple tilt switch. With...

SKU: DF-SEN0386 | Brand: DFRobot

A high-precision serial 6-axis accelerometer and gyroscope module with a built-in microprocessor, Kalman filter algorithm, and attitude solver. Outputs real-time roll, pitch, and yaw angles with a static accuracy of 0...

SKU: SF-SEN-17049 | Brand: SparkFun

The MQ-2 is a smoke and combustible gas sensor manufactured by Winsen. It detects flammable gases and smoke in a concentration range of 300–10,000 ppm, with particularly high sensitivity to propane and smoke. It's wid...

SKU: SF-SEN-17052 | Brand: SparkFun

The MQ-136 is a Hydrogen Sulfide detection sensor with a sensing range of 1 - 200ppm. The sensing element is SnO2, which has lower conductivity in clean air. When H₂S gas exists, the sensor’s conductivity gets higher ...

SKU: EF-EF04014 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various d...

SKU: DF-KIT0150 | Brand: DFRobot

Go interactive with your applications with this new sensor kit! 37 sensors are included in one kit, which definitely gives you a bigger bang for your buck.In the version of this sensor kit, we add more sensor modules ...

SKU: AF-3846 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive th...

SKU: AF-1031 | Brand: Adafruit

This SHARP distance sensor bounces IR off objects to determine how far away they are. It returns an analog voltage that can be used to determine how close the nearest object is. Comes with 8" long 3-JST interface wire...

SKU: AF-4058 | Brand: Adafruit

You've heard about the sensors in the news, when used in self-driving cars, and now you can have your own! Garmin's LIDAR-Lite V3 is the ideal high-performance (but compact) optical distant measurement sensor solution...