Arduino Sensors

SKU: DF-SEN0469 | Brand: DFRobot

This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontrolle...

SKU: SF-GPS-23288 | Brand: SparkFun

Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in ...

SKU: SF-KIT-23452 | Brand: SparkFun

Get started with high-precision RTK GNSS and dead reckoning using u-blox's ZED-F9R module. This kit combines a sensor-fusion GPS breakout, a multiband SMA antenna and a USB cable so you have the core hardware needed f...

SKU: SF-GPS-22693 | Brand: SparkFun

This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, corr...

SKU: SF-SEN-29529 | Brand: SparkFun

This ultra-small Qwiic-enabled breakout adds three-axis acceleration sensing to compact projects using the LIS3DH, a smart, low-power capacitive micro-machined accelerometer with 12-bit resolution. It can be used for ...

SKU: SF-GPS-30018 | Brand: SparkFun

Built around the u-blox SAM-M8Q module, this compact GNSS receiver is a straightforward way to add location tracking to a project. Plug in USB-C for power and configuration, or use the Qwiic connectors for solder-free...

SKU: SF-GPS-30975 | Brand: SparkFun

Built around the u-blox ZED-F9T-20B receiver, this breakout is made for projects where precise time matters as much as location. Under clear skies it can provide five nanoseconds of timing accuracy without requiring e...

SKU: SF-SEN-23220 | Brand: SparkFun

Measure visible and near-infrared light with a compact Qwiic breakout based on the AS7343 multi-spectral sensor. It covers approximately 380nm to 1000nm and is suited to reflected, emitted and transmitted light measur...

SKU: DF-SEN0705 | Brand: DFRobot

This flexible tactile pressure sensor gives your project a compact 4 x 8 pressure matrix for mapping contact across a small surface. It integrates 32 independent sensing points in a 20 x 10mm active area, making it us...

SKU: DF-SEN0709 | Brand: DFRobot

This industrial-grade ORP (Oxidation-Reduction Potential) sensor is built for reliable water quality monitoring in demanding environments. Its integrated probe and housing measure ORP from -1999 to 1999mV, with RS485 ...

SKU: DF-SEN0716 | Brand: DFRobot

This industrial non-contact liquid level sensor uses capacitive sensing to detect liquid through non-metallic container walls, so it does not need to touch corrosive, viscous or contaminated liquids. It is suited to l...

SKU: DF-SEN0704 | Brand: DFRobot

This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-ti...

SKU: DF-SEN0690 | Brand: DFRobot

Add a slim linear touch input to curved or space-constrained surfaces with this flexible ribbon-style potentiometer. At just 0.45mm thick, it can conform to wearables, curved dashboards, soft robotics and other builds...

SKU: DF-SEN0711 | Brand: DFRobot

Built for submerged water monitoring, this industrial-grade probe measures ammonia nitrogen concentration in water, including free ammonia (NH3) and ammonium ions (NH4+). It combines the probe and housing into an inte...

SKU: DF-SEN0715 | Brand: DFRobot

This compact capacitive sensor detects the presence or level of liquid through non-metallic container walls, so it does not need to touch the liquid. That helps avoid corrosion, contamination and media adhesion when m...

SKU: DF-SEN0708 | Brand: DFRobot

This industrial-grade water quality sensor is designed for continuous pH monitoring in demanding environments. Its integrated probe and housing provide a robust, streamlined setup for measuring pH in non-corrosive, we...

SKU: DF-SEN0712 | Brand: DFRobot

This industrial-grade residual chlorine sensor is designed for precise, reliable water quality monitoring in demanding environments. Its integrated probe and housing measure residual chlorine concentrations, specifica...

SKU: DF-SEN0706 | Brand: DFRobot

This industrial-grade water electrical conductivity sensor combines the probe and housing into a single integrated unit for straightforward installation and reliable measurement. It uses an electrode constant of K=1 a...

SKU: DF-SEN0707 | Brand: DFRobot

This industrial-grade water electrical conductivity sensor combines the probe and housing in one integrated unit for straightforward installation and reliable EC measurement. With an electrode constant of K=10, it is ...

SKU: DF-SEN0710 | Brand: DFRobot

Designed for industrial water-quality monitoring, this turbidity probe measures suspended particles using the 90° light scattering principle. The probe and housing are integrated into a compact IP68 unit, so it can be...