Arduino Sensors
Browse our range of Arduino-compatible sensors available for delivery across Australia. From temperature, humidity, and pressure sensors to accelerometers, gyroscopes, and liquid level detectors, you'll find the right module for your next project.
These sensor breakout boards are ideal for hobbyists, STEM educators, and makers building weather stations, robotics, IoT devices, and motion-tracking systems. Compatible with popular Arduino boards and many with Qwiic/STEMMA QT connectors for easy wiring.
STC31 CO2 Sensor (Qwiic)
SKU: SF-SEN-29260 | Brand: SparkFun
Measure high concentrations of carbon dioxide with a Qwiic breakout built around Sensirion’s STC31 sensor. It is designed for CO2 measurements up to 100% volume, using a thermal conductivity measurement principle and ...
Delivered by Mon 26 Oct
Magnetic Imaging Tile - 8x8
SKU: SF-SEN-26092 | Brand: SparkFun
Visualise magnetic fields in real time with a dense 8x8 array of Hall-effect sensors. This tile lets you observe nearby magnets, current flow in wires and fields generated by electric motors as a live magnetic image.T...
Delivered by Mon 26 Oct
Micro Proximity Sensor - 20 cm VCNL4040 (Qwiic)
SKU: SF-SEN-30161 | Brand: SparkFun
Built around the VCNL4040, this tiny Qwiic Micro breakout provides short-range presence detection for projects where space and weight are tight. It is designed for qualitative sensing: detecting whether an object is p...
Delivered by Mon 26 Oct
Qwiic Soil Moisture Sensor
SKU: SF-SEN-24409 | Brand: SparkFun
This compact breakout board measures moisture in soil and similar materials using two large exposed pads as conductivity probes. As the soil gets wetter, conductivity between the pads increases, resistance drops, and ...
Delivered by Mon 26 Oct
NEO-F9P GNSS-RTK L1/L5 Breakout with Qwiic
SKU: SF-GPS-23288 | Brand: SparkFun
Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in ...
Delivered by Mon 26 Oct
GPS-RTK Dead Reckoning Kit (ZED-F9R, SMA)
SKU: SF-KIT-23452 | Brand: SparkFun
Get started with high-precision RTK GNSS and dead reckoning using u-blox's ZED-F9R module. This kit combines a sensor-fusion GPS breakout, a multiband SMA antenna and a USB cable so you have the core hardware needed f...
Delivered by Mon 26 Oct
GPS-RTK Dead Reckoning Breakout - ZED-F9R (Qwiic)
SKU: SF-GPS-22693 | Brand: SparkFun
This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, corr...
Delivered by Mon 26 Oct
LIS3DH Micro Triple Axis Accelerometer Breakout (Qwiic)
SKU: SF-SEN-29529 | Brand: SparkFun
This ultra-small Qwiic-enabled breakout adds three-axis acceleration sensing to compact projects using the LIS3DH, a smart, low-power capacitive micro-machined accelerometer with 12-bit resolution. It can be used for ...
Out of stock
SAM-M8Q GNSS Receiver (Qwiic)
SKU: SF-GPS-30018 | Brand: SparkFun
Built around the u-blox SAM-M8Q module, this compact GNSS receiver is a straightforward way to add location tracking to a project. Plug in USB-C for power and configuration, or use the Qwiic connectors for solder-free...
Delivered by Mon 26 Oct
GNSS Timing Breakout - ZED-F9T-20B (Qwiic)
SKU: SF-GPS-30975 | Brand: SparkFun
Built around the u-blox ZED-F9T-20B receiver, this breakout is made for projects where precise time matters as much as location. Under clear skies it can provide five nanoseconds of timing accuracy without requiring e...
Delivered by Mon 26 Oct
AS7343 Qwiic Spectral Sensor
SKU: SF-SEN-23220 | Brand: SparkFun
Measure visible and near-infrared light with a compact Qwiic breakout based on the AS7343 multi-spectral sensor. It covers approximately 380nm to 1000nm and is suited to reflected, emitted and transmitted light measur...
Delivered by Mon 26 Oct
INA237 Qwiic Current Sensor
SKU: SF-SEN-31437 | Brand: SparkFun
Monitor DC current and power over I2C with this Qwiic breakout based on the Texas Instruments INA237 digital power monitor. It measures current, bus voltage, internal temperature and power for an in-line DC input usin...
Delivered by Mon 26 Oct
INA228 Qwiic Current Sensor Breakout
SKU: SF-SEN-31438 | Brand: SparkFun
This compact Qwiic breakout uses the Texas Instruments INA228 digital power monitor to measure DC current and power with high precision over I2C. The onboard 20-bit delta-sigma ADC supports readings for current, volta...
Delivered by Mon 26 Oct
