Arduino Sensors

SKU: AF-5183 | Brand: Adafruit

The DHT20 is a nice but inexpensive temperature and humidity sensor from the same folks that brought us the DHT22.This little sensor looks an awful lot like the popular DHT11/DHT22 temperature and humidity s...

SKU: AF-1164 | Brand: Adafruit

This breakout board will solve all your current-monitoring problems. Instead of struggling with a multimeter, you can just use the handy INA169 chip on this breakout to both measure both the DC current draw and have a...

SKU: AF-6067 | Brand: Adafruit

The Adafruit LPS28 Pressure Sensor Breakout features the ST LPS28DFW — a barometric pressure sensor with an extended range up to 4060 hPa, far beyond the ~1260 hPa limit of most competing sensors. This makes it suitab...

SKU: AF-6062 | Brand: Adafruit

The Adafruit INA3221 breakout monitors current, voltage, and power on up to three independent power rails simultaneously over I2C. Each channel supports high or low-side measurement up to +26V DC at ±3.2A with ±1% pre...

SKU: AF-642 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive th...

SKU: AF-6407 | Brand: Adafruit

This Bosch BMP581 breakout is a precision barometric pressure, temperature and altimeter sensor for environmental sensing, drones, wearables and projects that need to track height above sea level. It offers much finer...

SKU: AF-6455 | Brand: Adafruit

Build a digital nose for indoor air quality projects with this SGP41 gas sensor breakout. The Sensirion SGP41 is a fully integrated MOX gas sensor with I2C interfacing, so you do not need to manage heater control or a...

SKU: AF-6064 | Brand: Adafruit

Need approximate distance sensing over tens of centimetres to around a metre, plus ambient light measurement from the same board? This breakout carries Vishay’s VCNL4200, a two-in-one IR proximity and ambient light se...

SKU: AF-6051 | Brand: Adafruit

Add magnetic sensing to your project with this breakout built around the Texas Instruments DRV5032 digital Hall effect sensor. Its digital output changes when the magnetic flux density threshold is crossed, making it ...

SKU: AF-6174 | Brand: Adafruit

The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. Featuring a PTFE membrane for protection a...

SKU: AF-904 | Brand: Adafruit

This breakout board will solve all your power-monitoring problems. Instead of struggling with two multimeters, you can just use the handy INA219B chip on this breakout to both measure both the high side voltage and DC...

SKU: AF-6461 | Brand: Adafruit

This compact breakout combines RGB colour sensing, true lux light measurement and infrared proximity detection in one I2C device. With library code running on your microcontroller, it can read red, green, blue and cle...

SKU: AF-6489 | Brand: Adafruit

This breakout makes it easy to add 3D Hall-effect magnetic sensing to a microcontroller project. The TMAG5273 integrates independent X, Y and Z Hall-effect sensors with a 12-bit ADC, giving you magnetic measurements o...