Arduino Sensors
Browse our range of Arduino-compatible sensors available for delivery across Australia. From temperature, humidity, and pressure sensors to accelerometers, gyroscopes, and liquid level detectors, you'll find the right module for your next project.
These sensor breakout boards are ideal for hobbyists, STEM educators, and makers building weather stations, robotics, IoT devices, and motion-tracking systems. Compatible with popular Arduino boards and many with Qwiic/STEMMA QT connectors for easy wiring.
Adafruit LPS28 (LPS28DFW) Pressure Sensor - STEMMA QT / Qwiic
SKU: AF-6067 | Brand: Adafruit
The Adafruit LPS28 Pressure Sensor Breakout features the ST LPS28DFW — a barometric pressure sensor with an extended range up to 4060 hPa, far beyond the ~1260 hPa limit of most competing sensors. This makes it suitab...
Delivered by Tue 7 Jul
Adafruit INA3221 - Triple 0-26 VDC, ±3.2 Amp Power Monitor
SKU: AF-6062 | Brand: Adafruit
The Adafruit INA3221 breakout monitors current, voltage, and power on up to three independent power rails simultaneously over I2C. Each channel supports high or low-side measurement up to +26V DC at ±3.2A with ±1% pre...
Delivered by Tue 7 Jul
MicroMod GNSS RTK Carrier Board - ZED-F9P
SKU: SF-GPS-17722 | Brand: SparkFun
Built around the u-blox ZED-F9P, this MicroMod carrier gives your project high-precision GNSS and RTK positioning in a swappable, solderless MicroMod format. It supports rover and base station operation, with RTK accu...
Delivered by Fri 26 Jun
Adafruit BMP581 I2C/SPI Temperature & Pressure Sensor
SKU: AF-6407 | Brand: Adafruit
This Bosch BMP581 breakout is a precision barometric pressure, temperature and altimeter sensor for environmental sensing, drones, wearables and projects that need to track height above sea level. It offers much finer...
Delivered by Tue 7 Jul
SGP41 VOC & NOx Gas Sensor Breakout
SKU: AF-6455 | Brand: Adafruit
Build a digital nose for indoor air quality projects with this SGP41 gas sensor breakout. The Sensirion SGP41 is a fully integrated MOX gas sensor with I2C interfacing, so you do not need to manage heater control or a...
Delivered by Tue 7 Jul
GPS-RTK Dead Reckoning Breakout - ZED-F9R (Qwiic)
SKU: SF-GPS-22693 | Brand: SparkFun
This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, corr...
Delivered by Fri 26 Jun
VCNL4200 Long Distance IR Proximity & Light Sensor Breakout
SKU: AF-6064 | Brand: Adafruit
Need approximate distance sensing over tens of centimetres to around a metre, plus ambient light measurement from the same board? This breakout carries Vishay’s VCNL4200, a two-in-one IR proximity and ambient light se...
Delivered by Tue 7 Jul
Adafruit Sensirion SHT45 Precision Temp & Humidity with PTFE
SKU: AF-6174 | Brand: Adafruit
The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. Featuring a PTFE membrane for protection a...
Out of stock
APDS9999 Proximity, Lux & Colour Sensor
SKU: AF-6461 | Brand: Adafruit
This compact breakout combines RGB colour sensing, true lux light measurement and infrared proximity detection in one I2C device. With library code running on your microcontroller, it can read red, green, blue and cle...
Out of stock
TMAG5273 A1 3D Hall Effect Magnetometer Breakout
SKU: AF-6489 | Brand: Adafruit
This breakout makes it easy to add 3D Hall-effect magnetic sensing to a microcontroller project. The TMAG5273 integrates independent X, Y and Z Hall-effect sensors with a 12-bit ADC, giving you magnetic measurements o...
Out of stock
