Arduino Sensors

SKU: DF-SEN0610 | Brand: DFRobot

##Introduction The Gravity: C4001 millimeter-wave presence sensor, operating at a wavelength signal of 24GHz, boasts a horizontal detection range of 100°, a presence detection range of 8 meters, and a motion detection...

SKU: DF-SEN0540 | Brand: DFRobot

The Gravity LTR390-UV sensor provides both ambient light and UV sensing with a UV spectral response from 280nm to 430nm. It features high sensitivity, quick response, and strong anti-interference performance. With a ...

SKU: DF-SEN0326 | Brand: DFRobot

The binocular camera module features dual onboard OV2640 cameras, 2MP pixels, 60mm binocular distance, compatible with standard 24P camera. It is suitable for AI vision applications like depth vision and stereo vision...

SKU: SF-PRT-18582 | Brand: SparkFun

This IR proximity contactless button makes for a good replacement for typical push buttons in situations where touching the button isn't required or desirable (especially in this day and age). This button includes a b...

SKU: DF-SEN0395 | Brand: DFRobot

This 24GHz millimeter-wave radar sensor employs FMCW, CW multi-mode modulation, and separate transmitter and receiver antenna structure.In working, the sensor first emits FMCW and CW radio waves to the sensing area. N...

SKU: LB-24-THERMISTOR | Brand: Little Bird

A thermistor changes its resistance with temperature. Find our tutorial here A thermistor is a type of variable resistor whose resistance changes with temperature. Let's take a closer look at the thermistor module....

SKU: SF-SEN-15569 | Brand: SparkFun

This is the HC-SR04 ultrasonic distance sensor. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a ranging accuracy that can reach up to 3mm. Each HC-SR04 module includes an u...

SKU: SF-DEV-09267 | Brand: SparkFun

The LilyPad Accelerometer is a three-axis accelerometer based on the Analog Devices ADXL335, designed for the LilyPad wearable e-textile system. It detects joint movement, inclination, and vibration, outputting 0–3 V ...

SKU: DF-SEN0130 | Brand: DFRobot

The Gravity MQ5 gas sensor is highly sensitive to LPG, natural gas, and town gas, with lower sensitivity to alcohol, cooking fumes, and cigarette smoke. The analogue output is proportional to gas concentration, and se...

SKU: DF-SEN0138-L | Brand: DFRobot

A compact crash sensor (left-side variant) based on a miniature snap-action micro switch with roller lever. Designed for Arduino and compatible microcontrollers, this sensor module includes an onboard pull-up resistor...

SKU: PL-136 | Brand: Pololu

The Sharp GP2Y0A21YK0F is an infrared distance sensor that outputs an analogue voltage corresponding to the distance of the nearest object within its 10–80 cm detection range. Using IR triangulation, it provides relia...

SKU: SF-SEN-09570 | Brand: SparkFun

Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614’s high accuracy and resolution. It has a huge numb...

SKU: AF-6413 | Brand: Adafruit

The BMP585 from Bosch is a ported barometric pressure and temperature sensor featuring a tube attachment point for differential or remote pressure measurements. It delivers exceptional precision with altitude noise as...

SKU: SF-SEN-29211 | Brand: SparkFun

The SparkFun VEML7700 Qwiic Ambient Light Sensor provides accurate 16-bit light readings from 0 to 167,000 lux via I2C. The sensor features Vishay's Filtron™ technology for human-eye-like response and ultra-low power ...

SKU: DF-DFR1129 | Brand: DFRobot

##Introduction The Gravity: Photo Interrupter Module integrates a high-performance ITR9608 photoelectric switch. Its compact design and easy operation make it an ideal choice for electronic projects and applications. ...

SKU: DF-DFR1132 | Brand: DFRobot

##Introduction Gravity: Linear/Analog Hall Sensor is a high-precision device designed for measuring and monitoring magnetic field strength. Advanced Hall effect circuitry at the core converts magnetic induction streng...

SKU: DF-DFR1184 | Brand: DFRobot

The Gravity 0–10V ADC Module is a high-precision dual-channel analogue-to-digital converter designed to interface industrial-grade 0–10V sensors with microcontrollers and Linux-based systems. Built on the Texas Instru...

SKU: DF-SEN0537 | Brand: DFRobot

The ENS160 Air Quality Sensor uses ScioSense's ENS160 chip with TrueVOC and metal oxide (MOX) technology to monitor indoor air quality. It outputs TVOC (total volatile organic compounds), eCO2 (equivalent CO2), and AQ...

SKU: AF-5543 | Brand: Adafruit

The Adafruit LSM6DS3TR-C + LIS3MDL is a precision 9 Degree of Freedom (9-DoF) inertial measurement unit on a single breakout board. It pairs the LSM6DS3TR-C accelerometer/gyroscope with the LIS3MDL magnetometer — prov...

SKU: DF-SEN0394 | Brand: DFRobot

The Gravity SGP40 Air Quality Sensor uses Sensirion's SGP40 digital VOC sensor chip with built-in temperature and humidity compensation. It outputs a VOC index (0–500) that can be used directly to evaluate indoor air ...