Arduino Sensors
Browse our range of Arduino-compatible sensors available for delivery across Australia. From temperature, humidity, and pressure sensors to accelerometers, gyroscopes, and liquid level detectors, you'll find the right module for your next project.
These sensor breakout boards are ideal for hobbyists, STEM educators, and makers building weather stations, robotics, IoT devices, and motion-tracking systems. Compatible with popular Arduino boards and many with Qwiic/STEMMA QT connectors for easy wiring.
Gravity Factory-Calibrated Laser Methane CH4 Sensor
SKU: DF-SEN0654 | Brand: DFRobot
This lab-grade methane sensor is designed for quantitative CH₄ measurement in research settings, using TDLAS technology to report methane concentration in %LEL rather than the broad estimates typical of MQ-style gas s...
Delivered by Fri 26 Jun
Gravity BMP585 Barometric Pressure & Temperature Sensor (I2C/UART)
SKU: DF-SEN0664 | Brand: DFRobot
Built around the Bosch BMP585 chip, this Gravity module measures barometric pressure and temperature for altitude, weather and environmental sensing projects. Its gel-filled cavity and industrial protective cover help...
Delivered by Fri 26 Jun
Gravity BMP581 Barometric Pressure & Temperature Sensor - I2C/UART
SKU: DF-SEN0665 | Brand: DFRobot
This compact Gravity module brings Bosch BMP581 pressure and temperature sensing to microcontroller projects that need stable altitude or environmental readings. It is designed for applications such as drone altitude ...
Delivered by Fri 26 Jun
Gravity HF Gas Sensor (Calibrated) - I2C/UART/Analogue
SKU: DF-SEN0475 | Brand: DFRobot
Measure hydrogen fluoride concentration with a factory-calibrated electrochemical probe that supports analogue, I2C and UART output modes. It is designed for quickly building an HF concentration detector for industria...
Delivered by Fri 26 Jun
Gravity Calibrated NH3 Ammonia Sensor - I2C/UART
SKU: DF-SEN0469 | Brand: DFRobot
This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontrolle...
Delivered by Fri 26 Jun
NEO-F9P GNSS-RTK L1/L5 Breakout with Qwiic
SKU: SF-GPS-23288 | Brand: SparkFun
Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in ...
Delivered by Fri 26 Jun
GPS-RTK Dead Reckoning Breakout - ZED-F9R (Qwiic)
SKU: SF-GPS-22693 | Brand: SparkFun
This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, corr...
Delivered by Fri 26 Jun
DFRobot SEN0704 6x6 Flexible Tactile Pressure Sensor - UART
SKU: DF-SEN0704 | Brand: DFRobot
This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-ti...
Delivered by Fri 26 Jun
DFRobot Ultra-Compact ToF Laser Ranging Sensor - 7.8m
SKU: DF-SEN0646 | Brand: DFRobot
This ultra-compact dToF laser ranging sensor uses 940nm laser pulses to measure distance up to 7.8 metres with typical ±4cm accuracy. It is designed for precise, real-time ranging in compact robotics, drone, IoT and a...
Delivered by Fri 26 Jun
25m Long Distance ToF Laser Sensor (±3cm Accuracy, 100Hz, 100K LUX Resistant)
SKU: DF-SEN0647 | Brand: DFRobot
The TOFSense F2 is a high-performance laser distance sensor using dTOF (Direct Time-of-Flight) technology. With 25m range, ±3cm accuracy, and 100Hz refresh rate, it's ideal for robotics, industrial automation, drones,...
Out of stock
