Arduino Sensors
Browse our range of Arduino-compatible sensors available for delivery across Australia. From temperature, humidity, and pressure sensors to accelerometers, gyroscopes, and liquid level detectors, you'll find the right module for your next project.
These sensor breakout boards are ideal for hobbyists, STEM educators, and makers building weather stations, robotics, IoT devices, and motion-tracking systems. Compatible with popular Arduino boards and many with Qwiic/STEMMA QT connectors for easy wiring.
Hall-Effect Sensor - AH1815 (Non-Latching)
SKU: SF-SEN-14709 | Brand: SparkFun
The AH1815 is an integrated Hall-Effect non-latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sen...
Delivered by Wed 17 Jun
Force Sensitive Resistor - Square
SKU: SF-SEN-09376 | Brand: SparkFun
This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the res...
Delivered by Wed 17 Jun
Humidity and Temperature Sensor - DHT20
SKU: SF-SEN-18364 | Brand: SparkFun
The DHT20 is a factory-calibrated digital humidity and temperature sensor with an I²C interface. An upgrade to the popular DHT11/DHT22 series, it provides reliable environmental measurements without requiring addition...
Delivered by Wed 17 Jun
16 Channel Multiplexer
SKU: SF-COM-00299 | Brand: SparkFun
The Texas Instruments CD74HC4067 is a 16-channel analogue multiplexer/demultiplexer IC. It allows you to route one of 16 analogue signals to a single common pin (or vice versa) using just 4 digital control lines plus ...
Delivered by Wed 17 Jun
Force Sensitive Resistor - Small
SKU: SF-SEN-09673 | Brand: SparkFun
A compact force sensitive resistor (FSR) from Interlink Electronics with a 4 mm (0.16″) diameter active sensing area. The resistance changes based on applied pressure — from over 1 MΩ with no pressure down to approxim...
Delivered by Wed 17 Jun
SparkFun Soil Moisture Sensor
SKU: SF-SEN-13322 | Brand: SparkFun
The SparkFun Soil Moisture Sensor is a simple breakout for measuring the moisture in soil and similar materials. The soil moisture sensor is pretty straight forward to use. The two large exposed pads function as probe...
Delivered by Wed 17 Jun
Hydrogen Sulfide Gas Sensor - MQ-136
SKU: SF-SEN-17052 | Brand: SparkFun
The MQ-136 is a Hydrogen Sulfide detection sensor with a sensing range of 1 - 200ppm. The sensing element is SnO2, which has lower conductivity in clean air. When H₂S gas exists, the sensor’s conductivity gets higher ...
Delivered by Fri 26 Jun
Ambient Light Sensor - TEMT6000x01
SKU: SF-COM-08348 | Brand: SparkFun
The TEMT6000x01 is a compact ambient light sensor that operates as an NPN phototransistor. The more light that hits the sensor, the stronger the base bias, producing an analog output proportional to the ambient light ...
Delivered by Wed 17 Jun
Barometric Pressure Sensor - MPL115A1
SKU: SF-SEN-09602 | Brand: SparkFun
The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10µA at o...
Delivered by Fri 26 Jun
Magnetic Imaging Tile - 8x8
SKU: SF-SEN-26092 | Brand: SparkFun
Visualise magnetic fields in real time with a dense 8x8 array of Hall-effect sensors. This tile lets you observe nearby magnets, current flow in wires and fields generated by electric motors as a live magnetic image.T...
Delivered by Fri 26 Jun
Hydrogen Gas Sensor - MQ-8
SKU: SF-SEN-10916 | Brand: SparkFun
This is a simple-to-use hydrogen gas sensor, suitable for sensing hydrogen concentrations in the air. The MQ-8 can detect hydrogen gas concentrations anywhere from 100-10000ppm. This sensor has a high sensitivity an...
Out of stock
