Arduino Sensors
Browse our range of Arduino-compatible sensors available for delivery across Australia. From temperature, humidity, and pressure sensors to accelerometers, gyroscopes, and liquid level detectors, you'll find the right module for your next project.
These sensor breakout boards are ideal for hobbyists, STEM educators, and makers building weather stations, robotics, IoT devices, and motion-tracking systems. Compatible with popular Arduino boards and many with Qwiic/STEMMA QT connectors for easy wiring.
Force Sensitive Resistor - Small
SKU: SF-SEN-09673 | Brand: SparkFun
A compact force sensitive resistor (FSR) from Interlink Electronics with a 4 mm (0.16″) diameter active sensing area. The resistance changes based on applied pressure — from over 1 MΩ with no pressure down to approxim...
Delivered by Wed 17 Jun
Infrared Thermometer - MLX90614
SKU: SF-SEN-09570 | Brand: SparkFun
Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614’s high accuracy and resolution. It has a huge numb...
Delivered by Wed 17 Jun
RS485 Photosynthetically Active Radiation (PAR) Sensor (400-700nm)
SKU: DF-SEN0641 | Brand: DFRobot
The RS485 PAR Sensor measures photosynthetically active radiation in the 400–700 nm wavelength range — the light spectrum that plants use for photosynthesis. It converts incident radiation into a signal proportional t...
Delivered by Wed 17 Jun
Octopus Temperature Sensor Brick TMP36 Analog for Arduino Micro:bit
SKU: EF-EF04079 | Brand: ElecFreaks
Octopus TMP36 Temperature Sensor Brick is a temperature sensor with low voltage and accurate celsius read. It can provide voltage output,which forms a linear relationship with celsius temperature. TMP36 do not need an...
Delivered by Wed 17 Jun
Carbon Monoxide Sensor (MQ7)
SKU: DF-FIT0227 | Brand: DFRobot
The MQ7 is a simple-to-use Carbon Monoxide (CO) sensor suitable for detecting CO concentrations in the air. It offers a wide detection range from 20 to 2000 ppm, making it ideal for safety monitoring and air quality p...
Delivered by Wed 17 Jun
Crash sensor Right-
SKU: DF-SEN0138-R | Brand: DFRobot
A miniature snap-action switch, also trademarked and frequently known as a micro switch, is an electric switch that is actuated by very little physical force.Micro switches are very widely used; among their appl...
Delivered by Wed 17 Jun
Infrared Proximity Sensor - Sharp GP2Y0A21YK
SKU: SF-SEN-00242 | Brand: SparkFun
The Sharp GP2Y0A21YK is an infrared proximity sensor with an analogue voltage output that varies with distance — from 3.1 V at 10 cm to 0.4 V at 80 cm. It uses an IR emitter and position-sensitive detector to measure ...
Delivered by Wed 17 Jun
SparkFun Soil Moisture Sensor
SKU: SF-SEN-13322 | Brand: SparkFun
The SparkFun Soil Moisture Sensor is a simple breakout for measuring the moisture in soil and similar materials. The soil moisture sensor is pretty straight forward to use. The two large exposed pads function as probe...
Delivered by Wed 17 Jun
SparkFun DeadOn RTC Breakout - DS3234
SKU: SF-BOB-10160 | Brand: SparkFun
Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-time clock with an integrated temperature-compensated crystal oscillator and crystal. Th...
Delivered by Wed 17 Jun
TFS20-L ToF LiDAR Sensor (20m, Sunlight Resistant, 1.35g)
SKU: DF-SEN0672 | Brand: DFRobot
The Benewake TFS20-L is an ultra-compact ToF LiDAR sensor weighing just 1.35g. With 20m range, centimetre-level accuracy, and 100K LUX sunlight resistance, it's designed for drones, robots, and space-constrained appli...
Delivered by Wed 17 Jun
Ambient Light Sensor - TEMT6000x01
SKU: SF-COM-08348 | Brand: SparkFun
The TEMT6000x01 is a compact ambient light sensor that operates as an NPN phototransistor. The more light that hits the sensor, the stronger the base bias, producing an analog output proportional to the ambient light ...
Delivered by Wed 17 Jun
Gravity: Joystick Module V2
SKU: DF-DFR0061 | Brand: DFRobot
The Gravity Joystick Module V2 provides two-axis analogue control (X and Y) plus a digital push-button switch. Connect the two analogue outputs and one digital output to your Arduino or other microcontroller for intui...
Delivered by Wed 17 Jun
Infrared Proximity Sensor Short Range - Sharp GP2Y0A41SK0F
SKU: SF-SEN-12728 | Brand: SparkFun
Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Termina...
Delivered by Wed 17 Jun
Gravity: Arduino Digital Buzzer
SKU: DF-DFR0032 | Brand: DFRobot
Here is the simplest sound making module that you can use High/Low to drive it. Just change the frequency it buzz, you can hear different sound. It is widely used on your daily application, like PC, refrigerator,...
Delivered by Wed 17 Jun