Arduino Boards

SKU: LB-EAGLED-BUZZ | Brand: Little Bird

EagLED is Little Bird Electronics' wearable development kit: an Arduino-compatible microcontroller board with LEDs, a light sensor, push button and buzzer built into a snippable PCB for e-textile projects.Built-in USB...

SKU: PJ-TEENSY4 | Brand: Little Bird

The Teensy 4.0 is a high-performance microcontroller development board powered by the NXP iMXRT1062 ARM Cortex-M7 processor running at 600 MHz. Despite its compact 35.6 × 17.8 mm (1.4 × 0.7") form factor — the same si...

SKU: DF-DFR1096 | Brand: DFRobot

The Arduino Nano ESP32 brings the ESP32-S3 (u-blox NORA-W106 module) into the familiar Nano form factor with a USB-C connector. It supports both Arduino and MicroPython programming, making it an accessible entry point...

SKU: AF-659 | Brand: Adafruit

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tut...

SKU: SF-DEV-10899 | Brand: SparkFun

The LilyTiny is a compact LilyPad board with a built-in ATtiny85 microcontroller that drives four pre-programmed LED patterns. Simply sew on four LEDs and connect a battery — no programming or main board required. Ea...

SKU: SF-DEV-11114 | Brand: SparkFun

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so tha...

SKU: LB-FINCH | Brand: Little Bird

The Little Bird Finch is our smallest programmable board for e-textiles. Australian made, and a great alternative to the Lilypad / Lilytiny, the Finch is designed to add flashy functionality to your e-textiles or cosp...

SKU: SF-DEV-11364 | Brand: SparkFun

The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s...

SKU: SF-DEV-14713 | Brand: SparkFun

The SparkFun Thing Plus SAMD51 is a development board built around the ATSAMD51J20 — a 32-bit ARM Cortex-M4F microcontroller with floating point unit, running at up to 120 MHz. It offers substantial processing power i...

SKU: SF-WRL-23319 | Brand: SparkFun

The Arduino GIGA R1 WiFi is a powerful development board built around the STM32H747XI dual-core microcontroller, featuring a Cortex-M7 at 480 MHz and a Cortex-M4 at 240 MHz. With 2 MB flash and 1 MB RAM, it handles de...

SKU: DF-DFR1056 | Brand: DFRobot

Note: The Arduino GIGA R1 WiFi Development Board is available for pre-order and is expected to be shipped in late September. This Arduino GIGA R1 WiFi Development Board measures only 101 x 53mm and has the same for...

SKU: SF-DEV-15444 | Brand: SparkFun

The SparkFun RedBoard Artemis brings the powerful Artemis module into a familiar Arduino Uno footprint. Built around the Ambiq Apollo3 processor, it runs at 48 MHz (with 96 MHz turbo mode), includes BLE 5.0, and draws...

SKU: SF-DEV-14631 | Brand: SparkFun

This is the LilyPad USB Plus, a sewable electronics microcontroller board controlled by an ATmega32U4 with the Arduino bootloader. It has a built in power supply JST (and recharge circuit) and an on/off switch with t...

SKU: AF-3505 | Brand: Adafruit

The Adafruit Metro M0 Express brings 32-bit ARM power to the familiar Metro/UNO shield-compatible form factor. Powered by the ATSAMD21G18 ARM Cortex M0+ processor at 48 MHz, it offers 256 KB flash and 32 KB RAM — a ma...

SKU: SF-DEV-21251 | Brand: SparkFun

The Arduino Nano BLE Sense Rev2 packs the nRF52840 processor (32-bit ARM Cortex-M4 at 64 MHz) into the compact Nano form factor, with 1MB flash and 256KB SRAM. It includes Bluetooth 5.0, an impressive array of onboard...

SKU: SF-DEV-17712 | Brand: SparkFun

With a 32-bit ARM® Cortex®-M4 RISC core, the SparkFun STM32 Thing Plus brings power and precision to your projects. The STM32 Thing Plus provides you with an economical and easy to use development platform if you're ...

SKU: LB-FINCH-5 | Brand: Little Bird

Bulk pack of 5The Little Bird Finch is our smallest programmable board. The Finch is a tiny little  board designed to add flashy functionality to your project without taking up a lot of room. It has an ...

SKU: SF-DEV-12587 | Brand: SparkFun

Here at SparkFun, we refuse to leave ‘good enough’ alone. That’s why we’re adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on ...

SKU: SF-WRL-28434 | Brand: SparkFun

The SparkFun IoT RedBoard combines the powerful ESP32-D0WDQ6 microcontroller with MicroPython pre-installed, letting you start coding IoT projects right out of the box. No need for complex toolchains – just connect vi...

SKU: KS-FB0001 | Brand: Keyestudio

 The FoxBit is a versatile development board built around the powerful ESP32-D0WDQ6 dual-core microcontroller, designed for education, makers, and electronics enthusiasts. Ideal for IoT, STEAM education, smart c...