All Products

SKU: AF-1787 | Brand: Adafruit

A quad level-shifting buffer IC that excels at converting 3V logic signals up to 5V. Power the 74AHCT125 with 5V and it will cleanly detect 3.3V logic inputs — particularly useful when connecting devices like Teensy 3...

SKU: DF-FIT0265 | Brand: DFRobot

Micro USB 2.0 to USB type A cable, a standard USB connector for cellphones, Arduino Leonardo or other embeded boards to common computer connector. This is a consumer standard, smaller connector for USB devices. Mic...

SKU: SF-SEN-13879 | Brand: SparkFun

The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the...

SKU: AF-261 | Brand: Adafruit

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers! We have the socket 'mating' version of this cable over here, as well as an 'ex...

SKU: DF-SER0043 | Brand: DFRobot

INTRODUCTION The TowerPro SG90C is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can be used for various applications and DIY products, such as toy cars, boats, windmills etc...

SKU: WS-18994 | Brand: Waveshare

A GPIO header adapter designed specifically for the Raspberry Pi 400. It connects to the Pi 400's rear GPIO header and provides a standard 40-pin breakout, making it easy to attach HATs, breadboards, and other expansi...

SKU: WS-31957 | Brand: Waveshare

Unleash Your Creativity with the ESP32-S3 2.06inch AMOLED Touch Watch Development Board Take your wearable tech designs to the next level with the powerful and versatile ESP32-S3 2.06inch AMOLED Touch Watch Developmen...

SKU: SF-PRT-26026 | Brand: SparkFun

This is a 500mm camera cable for use with MIPI displays and the Raspberry Pi 5. The Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use t...

SKU: DF-FIT0978 | Brand: DFRobot

The ICE Tower Cooler is a high-performance tower-style cooling solution designed specifically for the Raspberry Pi 5. It features a tall aluminium heatsink with multiple fins for maximum surface area, topped with an a...

SKU: AF-5816 | Brand: Adafruit

SKU: LB-10M-RESISTOR | Brand: Little Bird

A pack of ten 10MΩ (10 megaohm) carbon film resistors rated at 0.25W (¼W) with 1% tolerance. This very high resistance value is commonly used in high-impedance input buffers, electrostatic discharge protection, and le...

SKU: EF-EF03406 | Brand: ElecFreaks

Motor:bit is a motor driving board based on micro:bit. It has integrated a TB6612 motor driving chip, which is used to drive two motors with maximun 1.2A DC single channel current. It has also integrated 12 GVS por...

SKU: AF-3421 | Brand: Adafruit

The Adafruit I2S MEMS Microphone Breakout features the SPH0645LM4H, a tiny digital MEMS microphone with a purely digital I2S output. Unlike analogue electret microphones, this mic sends digital audio data directly to ...

SKU: EF-EF08254 | Brand: ElecFreaks

The micro:bit Smart Agriculture Kit has a well-selection of IoT:bit, DS18B20 temperature sensor, soil moisture sensor, water level sensor, PIR sensor, servos and etc., we could use it to build such themes as the sm...

SKU: WS-19767 | Brand: Waveshare

Servo Driver Module For Pico Ideal For Controlling Robotic Arm Or Hexapod Walker Features At A Glance Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards Up to 16-Channel servo/PWM outpu...

SKU: AF-711 | Brand: Adafruit

A standard 130-size DC hobby motor with a wider operating range than typical toy motors: 4.5–9V DC instead of the usual 1.5–4.5V. This makes it ideal for Arduino and motor shield projects where 5V or 9V is readily ava...

SKU: AF-4752 | Brand: Adafruit

Proudly show off your love for the one and only, Raspberry Pi!  This is the official (and approved by the foundation) Raspberry Pi® enamel pin for use with educators, classrooms, workshops, Maker Faires, Te...

SKU: EF-EF08197 | Brand: ElecFreaks

The ElecFreaks Smart Home Kit is a micro:bit project kit for building interactive smart home models. It includes sensors, actuators, and cardboard building materials to create miniature scenes — a windowsill, wardrobe...

SKU: SF-CAB-13028 | Brand: SparkFun

This 40-pin (2×20) flat ribbon cable connects to the GPIO header on the Raspberry Pi, providing easy access to all GPIO, I2C, SPI, UART, and power pins. The 6-inch (15 cm) length keeps things tidy while giving you roo...

SKU: LB-LS6503 | Brand: Little Bird

The VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor is an advanced distance sensor module that provides highly accurate distance measurements using infrared laser technology. With a range of up to 2 meters, this com...