All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Arduino Portenta C33
SKU: SF-DEV-22692 | Brand: SparkFun
The Arduino Portenta C33 is a cost-effective industrial-grade module built around the Renesas R7FA6M5BH2CBG Arm Cortex-M33 microcontroller running at up to 200 MHz. It supports MicroPython and Arduino sketches, with o...
Delivered by Mon 17 Aug
LakiBeam 1L - 270 Degree Industrial-grade Single-line 2D ToF LiDAR (40m, 12V, Ethernet UDP, IP65)
SKU: DF-SEN0578 | Brand: DFRobot
This 2D single-line pulsed time-of-flight (ToF) LiDAR can realize the scanning measurement of the environmental profile within 270 degrees of the horizontal plane, with a precision of 2cm within a detection range of 0...
Delivered by Mon 17 Aug
SIM8262E-M2 5G Communication Module
SKU: DF-TEL0159 | Brand: DFRobot
SIM8262E-M2 is a 5G wireless communication module that supports 5G NR (NSA/SA), LTE-FDD, LTE-TDD, and WCDMA, and can meet the 3GPP R16NR specification. The module supports maximum 3.0Gbps downlink rate. It has optiona...
Delivered by Mon 17 Aug
Adafruit WCH CH9102F Friend - USB to Serial Converter
SKU: AF-5568 | Brand: Adafruit
The Adafruit CH9102F Friend is a USB-to-Serial converter breakout featuring the affordable WCH CH9102F chip and a modern USB Type-C connector. It uploads code at up to 3 Mbit/s and includes auto-reset for Arduino/ATme...
Delivered by Fri 28 Aug
SparkFun AzureWave Thing Plus - AW-CU488
SKU: SF-DEV-19957 | Brand: SparkFun
The SparkFun AzureWave Thing Plus is a Feather form-factor development board equipped with the AW-CU488. The module features the Realtek RTL8721DM integrated single-chip low-power dual-band (2.4GHz and 5GHz) wirele...
Delivered by Mon 17 Aug
Magnetic USB Type-C Plug Tip
SKU: AF-5524 | Brand: Adafruit
This is a magnetic USB Type C plug! They pair with the Black Woven USB A or Type-C to Type-C Cable with Magnetic Tip . Plug your USB C power (or data!) cable into one end, then insert the little magnetic nub into your...
Delivered by Fri 28 Aug
SparkFun PIR Breakout Starter Kit (170uA)
SKU: SF-KIT-19519 | Brand: SparkFun
The SparkFun 170uA PIR Breakout Starter Kit comes with everything you need to get started using Passive Infrared (PIR) sensors. PIR sensors are great for detecting motion in a small area around the sensor. The 170µA S...
Delivered by Mon 17 Aug
SparkFun MicroMod mikroBUS Starter Kit
SKU: SF-KIT-19935 | Brand: SparkFun
The SparkFun MicroMod mikroBUS™ Starter Kit is designed to give you just what you need to start using the MicroMod and Click ecosystems side-by-side. The core of this kit is designed around the SparkFun MicroMod mikro...
Delivered by Mon 17 Aug
Adafruit QT Py ESP32 Pico - WiFi Dev Board with STEMMA QT
SKU: AF-5395 | Brand: Adafruit
The Adafruit QT Py ESP32 Pico brings the full power of the classic ESP32 into the tiny QT Py form factor. Built around the ESP32-PICO-V3-02 — an all-in-one module with dual-core 240 MHz Tensilica processor, Wi-Fi, Blu...
Delivered by Fri 28 Aug
Adafruit QT Py ESP32-S3 WiFi Dev Board with STEMMA QT
SKU: AF-5426 | Brand: Adafruit
The Adafruit QT Py ESP32-S3 packs dual-core 240 MHz processing, Wi-Fi, Bluetooth LE, and native USB into the tiny QT Py form factor. With 8 MB flash and 512 KB SRAM, it's a significant step up from the ESP32-S2 — addi...
Delivered by Fri 28 Aug
Adafruit ESP32 Feather V2 w.FL Antenna - 8MB Flash + 2 MB PSRAM
SKU: AF-5438 | Brand: Adafruit
The Adafruit ESP32 Feather V2 with w.FL Antenna is identical to the standard ESP32 Feather V2 but replaces the PCB trace antenna with a w.FL (MHF3/IPEX3) connector for attaching an external antenna. This makes it idea...
Delivered by Fri 28 Aug
Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot
SKU: WS-21738 | Brand: Waveshare
The CM4-Duino is an Arduino-compatible base board for the Raspberry Pi Compute Module 4. It breaks out the CM4's key interfaces — HDMI, USB, M.2 NVMe, camera, and GPIO — in a compact form factor with Arduino-style pin...
Delivered by Thu 6 Aug
8G Mini USB Voice Recorder
SKU: EC-ACC11238G | Brand: Elecrow
This compact USB voice recorder doubles as an 8 GB flash drive. One-touch recording captures audio in WAV format with no flashing indicator lights, and files are accessible by plugging directly into any USB 2.0 port —...
Delivered by Thu 20 Aug
Luxonis OAK-D-IoT-40
SKU: SF-SEN-18737 | Brand: SparkFun
The OAK-D-IoT-40 is an Embedded/IoT version of the OAK-D imaginf platform from Luxonis. This sensor can be used completely standalone or via USB with a host like normal USB-only variants of DepthAI. It has a built-in ...
Delivered by Mon 17 Aug
USB to RS485 Serial Cable
SKU: DF-FIT0874 | Brand: DFRobot
RS485 serial ports are often used to enable communication between PC and RS485 devices. This USB to RS485 serial cable with built-in a CH340 bus converter chip allows direct communication between PC and 485 device wit...
Delivered by Mon 17 Aug
Spartan Arduino PLC 16RDA (Relay Output)
SKU: DF-DFR0903 | Brand: DFRobot
This Arduino-based Industrial PLC (Relay Output) features 8 inputs and 6 outputs(digital relay output). As it uses an Arduino Leonardo, you can directly program it through the USB, which is pretty easy to get sta...
Delivered by Mon 17 Aug
RS485 Connector Expansion Shield for LattePanda Alpha&Delta
SKU: DF-DFR0779 | Brand: DFRobot
This industrial-grade RS485 shield from DFRobot is specially designed to expand two parallel RS485 ports (terminal) with high reliability for LattePanda Alpha and LattePanda Delta. Employing FTDI USB to serial port ch...
Delivered by Mon 17 Aug
RS232 Connector Expansion Shield for LattePanda Alpha&Delta
SKU: DF-DFR0778 | Brand: DFRobot
An industrial-grade RS232 expansion shield designed for the LattePanda Alpha and LattePanda Delta. Adds a 9-pin D-Sub (DB9) male RS232 port using an FTDI USB-to-serial chip with an isolated transceiver module for reli...
Delivered by Mon 17 Aug
Raspberry Pi PLC Industrial Controller (Optoisolated Output)
SKU: DF-DFR0908 | Brand: DFRobot
This equipment based on the Raspberry Pi technology is designed for professional use.This PLC has up to 36 Digital Inputs, 16 Analog Inputs, 8 Analog Outputs, and 6 Interrupts.It also contains several communication po...
Delivered by Mon 17 Aug
M-DUINO PLC Arduino Ethernet 19R I/Os (Relay Output)
SKU: DF-DFR0905 | Brand: DFRobot
This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the M-Duino PLC has 17 I/Os including 4 analog and digital inputs...
Delivered by Mon 17 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
