All Products

SKU: EC-MCS01108S | Brand: Elecrow

The ELE Bluetooth Shield V1.2 adds wireless serial communication to your Arduino or Crowduino via Bluetooth V2.0+EDR. Simply stack it onto your board, select two digital pins (D0–D7) for software serial, and start sen...

SKU: M5-U038 | Brand: Little Bird

Description M5CameraX is a development board for image recognition. It features an ESP32(4M Flash + 520K RAM) chip and 2-Megapixel carmera(OV2640).M5Camera offers plenty of storage, with an extra 4 Mbyte ...

SKU: AF-4364 | Brand: Adafruit

Just about all electronics use a UART serial port with RX and TX pins for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. Thus, a serial cable is an...

SKU: AF-3379 | Brand: Adafruit

The Feather 32u4 Bluefruit LE with Headers combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging — with standard headers pre-soldered so you can plug st...

SKU: SS-103990049 | Brand: Seeed Studio

USB To Uart 5V/3V3 is a USB to serial adapter,Which is base on CH340,CH340 is a USB bus convert chip and it can realize USB convert to serial interface, USB convert to IrDA infrared or USB convert to printer interfa...

SKU: AF-1381 | Brand: Adafruit

This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can al...

SKU: AF-2378 | Brand: Adafruit

The Arduino Pro Mini is SparkFun's minimal design approach to Arduino.  It's essentially a 5v Arduino that runs an 16 MHz bootloader on a super small, super thin board.  There are no connectors attached -...

SKU: DF-DFR0164 | Brand: DFRobot

This is a new version of the FTDI breakout board features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The 8U2 firmware uses the standard USB COM drivers, and no ...

SKU: SF-SEN-11827 | Brand: SparkFun

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-12LA, a very simpl...

SKU: SF-WRL-13287 | Brand: SparkFun

The SparkFun ESP8266 WiFi Shield is an Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. There are a variety of designs based around the ...

SKU: SF-BOB-13263 | Brand: SparkFun

Introducing the 3.3V SparkFun FT231X Breakout board, complete with the full UART hardware handshake feature! The pin-out of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino board...

SKU: SF-SEN-13030 | Brand: SparkFun

The SparkFun RFID Reader Breakout converts the 2mm pin spacing of ID-series RFID readers to breadboard-friendly 0.1" headers. Compatible with the ID-3LA, ID-12LA, and ID-20LA readers, this board lets you solder the re...

SKU: DF-SEN0177 | Brand: DFRobot

The Gravity Laser PM2.5 Air Quality Sensor uses laser scattering to measure suspended particulate matter concentrations in the air. It detects particles from 0.3 to 10 µm in diameter and outputs digital concentration ...

SKU: SF-BOB-10124 | Brand: SparkFun

This is a breakout board for the SP3485 RS-485 transceiver IC, which will convert a UART serial stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can re...

SKU: EC-SEE00804D | Brand: Elecrow

The All-in-one Starter Kit for ESP32-P4 is a complete learning platform built around Espressif's ESP32-P4, a high-performance 32-bit RISC-V dual-core microprocessor with powerful image and voice processing capabilitie...

SKU: DF-SEN0672 | Brand: DFRobot

The Benewake TFS20-L is an ultra-compact ToF LiDAR sensor weighing just 1.35g. With 20m range, centimetre-level accuracy, and 100K LUX sunlight resistance, it's designed for drones, robots, and space-constrained appli...

SKU: YH-3000101267 | Brand: Yahboom

Yahboom K230 vision module is a high-performance, low-power embedded AI vision processing module designed for edge computing scenarios. It is designed based on the end-side AloT chip of the RISC-V architecture, with 6...

SKU: SF-COM-00650 | Brand: SparkFun

The FT232RL is a popular USB-to-UART bridge IC from FTDI, featuring a built-in EEPROM and oscillator for minimal external component requirements. It comes in a 28-pin SSOP package that can be hand-soldered, making it ...

SKU: SF-WRL-24807 | Brand: SparkFun

The ESP32-C6 MINI is Espressif's compact WiFi 6 module integrating 2.4GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), and IEEE 802.15.4 (Thread/Zigbee) into a single package with an on-board PCB antenna. Built around a hi...

SKU: AF-5750 | Brand: Adafruit

TinyPICO is the world’s smallest, fully-featured ESP32 development board, designed to unlock the power of the ESP32’s dual-core 240MHz and internet connectivity, in a package smaller than your thumb! Please note: Thi...