All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
DS3231 Precision RTC FeatherWing - RTC Add-on For Feather Boards
SKU: AF-3028 | Brand: Adafruit
A Feather board without ambition is a Feather board without FeatherWings! This is the DS3231 Precision RTC FeatherWing: it adds an extremely accurate I2C-integrated Real Time Clock (RTC) with a Temperature Compensa...
Delivered by Mon 5 Oct
Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731
SKU: AF-2946 | Brand: Adafruit
The Adafruit IS31FL3731 breakout is a charlieplexed PWM LED matrix driver that controls a 16×9 grid of individually dimmable LEDs over I2C. Each of the 144 LEDs can be set to any brightness level with 8-bit (256-level...
Delivered by Mon 5 Oct
Adafruit PCF8523 Real Time Clock Assembled Breakout Board
SKU: AF-3295 | Brand: Adafruit
Keep track of time even when your project loses power or gets reprogrammed. The PCF8523 Real Time Clock breakout is a battery-backed RTC that communicates over I2C and works with both 3.3 V and 5 V power and logic. Pe...
Delivered by Tue 27 Oct
Adafruit 1.8 Color TFT Shield w/microSD and Joystick
SKU: AF-802 | Brand: Adafruit
The Adafruit 1.8" Colour TFT Shield is a plug-and-play display solution for Arduino, combining a bright 128×160 pixel TFT screen with a microSD card slot, 5-way joystick navigation switch, and three tactile buttons. T...
Delivered by Mon 5 Oct
Adafruit 128x64 OLED Bonnet for Raspberry Pi
SKU: AF-3531 | Brand: Adafruit
The Adafruit 128×64 OLED Bonnet is a compact display add-on for Raspberry Pi, featuring a 1.3" diagonal monochrome OLED screen with a 5-way joystick and two pushbuttons. The high-contrast white OLED pixels are individ...
Delivered by Mon 5 Oct
4-JSTPH 6
SKU: AF-3568 | Brand: Adafruit
A 4-wire cable fitted with JST-PH 4-pin female connectors on each end, approximately 150mm (6") long. These compact, latching connectors are commonly used on STEMMA boards, small rechargeable battery packs, RC receive...
Delivered by Tue 27 Oct
Adafruit LTR-303 Light Sensor - STEMMA QT / Qwiic
SKU: AF-5610 | Brand: Adafruit
The Adafruit LTR-303 is a low-cost I2C digital light sensor that provides 16-bit measurements for both infrared and visible+IR spectrums. Subtract one from the other to get human-visible light readings. With configura...
Delivered by Tue 27 Oct
SOIC 8-Pin Test Clip to DIP Adapter
SKU: AF-5315 | Brand: Adafruit
An 8-pin SOIC test clip with a DIP breadboard adapter, designed for in-circuit probing and programming of flash memory, EEPROMs, and other 8-SOIC ICs — no soldering or desoldering required. Simply clip onto the chip t...
Delivered by Tue 27 Oct
Adafruit PCF8523 Real Time Clock Breakout Board
SKU: AF-5189 | Brand: Adafruit
Keep track of time even when your project loses power or gets reprogrammed. This updated PCF8523 Real Time Clock breakout features STEMMA QT / Qwiic connectors for solderless I2C wiring, plus traditional breadboard he...
Delivered by Mon 5 Oct
Adafruit SCD-40 - True CO2, Temperature and Humidity Sensor
SKU: AF-5187 | Brand: Adafruit
The Adafruit SCD-40 is a photoacoustic true CO2 sensor that directly measures carbon dioxide concentration in ambient air, rather than estimating it from volatile organic compounds. It also includes integrated tempera...
Delivered by Tue 27 Oct
NeoKey FeatherWing - Two Mechanical Key Switches with NeoPixels
SKU: AF-4979 | Brand: Adafruit
The NeoKey FeatherWing adds two mechanical key switch sockets with individually addressable NeoPixel backlighting to any Feather-format microcontroller. Each socket accepts Cherry MX or compatible switches (Kailh, Gat...
Delivered by Mon 5 Oct
Adafruit ISO1540 Bidirectional I2C Isolator - STEMMA QT / Qwiic
SKU: AF-4903 | Brand: Adafruit
This compact breakout provides electrical isolation between two sides of an I2C bus, helping separate earth-grounded circuits, reduce noise, or protect sensitive low-voltage monitoring equipment from faults cascading ...
Delivered by Tue 27 Oct
Adafruit TMP117 ±0.1°C High Accuracy I2C Temperature Sensor - STEMMA QT / Qwiic
SKU: AF-4821 | Brand: Adafruit
The Adafruit TMP117 is a high-accuracy I2C temperature sensor from Texas Instruments, offering 16-bit resolution (0.0078°C) and up to ±0.1°C accuracy across the most common temperature ranges. It's ideal for applicati...
Delivered by Tue 27 Oct
Adafruit SGP40 Air Quality Sensor Breakout - VOC Index - STEMMA QT / Qwiic
SKU: AF-4829 | Brand: Adafruit
The Adafruit SGP40 is a next-generation MOX (metal-oxide) gas sensor from Sensirion for indoor air quality monitoring. Unlike its predecessor the SGP30, the SGP40 outputs a raw signal that is processed through Sensiri...
Delivered by Mon 5 Oct
Adafruit Sensirion SHTC3 Temperature Humidity Sensor - STEMMA QT / Qwiic
SKU: AF-4636 | Brand: Adafruit
The Adafruit Sensirion SHTC3 is a compact temperature and humidity sensor with a true I2C interface, offering ±2% relative humidity and ±0.2 °C temperature accuracy. It's a cost-effective option from Sensirion's range...
Delivered by Tue 27 Oct
Adafruit Mini GPS PA1010D - UART and I2C - STEMMA QT
SKU: AF-4415 | Brand: Adafruit
The Adafruit Mini GPS PA1010D is a compact 25×25 mm GPS/GNSS breakout with a built-in patch antenna, dual UART and I2C interfaces, and STEMMA QT connectors for solderless plug-and-play use. Powered by the MTK3333 chip...
Delivered by Tue 27 Oct
Assembled Adafruit Prop-Maker FeatherWing
SKU: AF-4145 | Brand: Adafruit
The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting into your next prop build! This FeatherWing will unlock the prop-maker inside all of...
Delivered by Mon 5 Oct
Adafruit Grand Central M4 Express featuring SAMD51 - Without Headers
SKU: AF-4084 | Brand: Adafruit
The Adafruit Grand Central M4 Express is a powerful development board built around the Microchip ATSAMD51P20 — a 120 MHz Cortex M4 processor with hardware floating point, 1 MB Flash, and 256 KB RAM. In the familiar Ar...
Delivered by Tue 27 Oct
Adafruit Prototyping Pi Plate Kit for Raspberry Pi
SKU: AF-801 | Brand: Adafruit
The Adafruit Prototyping Pi Plate Kit snaps onto your Raspberry Pi and provides a generous prototyping area with all GPIO, I2C, SPI, and power pins broken out to labelled 0.1" strips and 3.5 mm screw-terminal blocks. ...
Delivered by Mon 5 Oct
Adafruit 0.56 4-Digit 7-Segment Display w/I2C Backpack - White
SKU: AF-1002 | Brand: Adafruit
The Adafruit 0.56" 4-Digit 7-Segment Display with I2C Backpack in white makes it easy to add a bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, so y...
Delivered by Mon 5 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared