All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Gravity: SHT31-F Digital Temperature and Humidity Sensor
SKU: DF-SEN0334 | Brand: DFRobot
Gravity: SHT31-F digital temperature and humidity sensor is based upon the Sensirion SHT31-F sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated capacitive humidity sensing components and band-gap ...
Delivered by Wed 14 Oct
SparkFun Real Time Clock Module - RV-8803 (Qwiic)
SKU: SF-BOB-16281 | Brand: SparkFun
The SparkFun RV-8803 Real Time Clock Module is a Qwiic-enabled breakout for the RV-8803 RTC, featuring a factory-calibrated temperature-compensated crystal for extremely precise timekeeping. It tracks hundredths of se...
Delivered by Wed 14 Oct
SparkFun Auto pHAT for Raspberry Pi
SKU: SF-ROB-16328 | Brand: SparkFun
The SparkFun Auto pHAT is an all-in-one robotics add-on for the Raspberry Pi. It drives up to two DC motors (with optional encoder support) and four servo motors, all controlled over I2C — leaving your Pi's GPIO pins ...
Delivered by Wed 14 Oct
micro:Maqueen Plus V2 (Ni-MH) with HUSKYLENS
SKU: DF-MBT0021-EN-1 | Brand: DFRobot
This advanced STEAM robotics platform is built for hands-on classroom learning, coding activities, autonomous navigation experiments and student competitions. It expands the Maqueen robot car platform with more onboar...
Delivered by Wed 14 Oct
GPIO Kit for Raspberry Pi Model B+
SKU: EC-RA000022RK | Brand: Elecrow
The GPIO extension kit used for extending the GPIO interface on Raspberry Pi B+, it helps you break out all those tasty power, GPIO, I2C and SPI pins from the 40 pin header of Raspberry Pi B+ onto a breadboard.There i...
Delivered by Mon 5 Oct
micro:IO Extender- a micro:bit IO Expansion Board
SKU: DF-MBT0008 | Brand: DFRobot
The micro:IO Extender is a compact expansion board for the BBC micro:bit that breaks out all 19 I/O pins as Gravity-compatible 3-pin headers. It provides plug-and-play access to the full range of micro:bit GPIO, along...
Delivered by Mon 5 Oct
IIC 16x2 RGB LCD KeyPad HAT with RGB Backlight(Compatible with Raspberry Pi 3B+/4B)
SKU: DF-DFR0514 | Brand: DFRobot
This is a 2*16 character RGB LCD+Keypad plate for Raspberry Pi. We made improvements in the wiring connection based on the previous LCD display as well as left out the contrast adjustment function, so the product can ...
Delivered by Wed 14 Oct
Gravity: I2C Non-contact IR Temperature Sensor (MLX90614-DCI)
SKU: DF-SEN0263 | Brand: DFRobot
We can divide temperature measurement in to two types: contact and non-contact. Contact measurement can only accurately measure temperature when the testing object and the sensor reach thermal equilibrium. This ca...
Delivered by Wed 14 Oct
Gravity: I2C 12-Bit DAC Module
SKU: DF-DFR0552 | Brand: DFRobot
The DFRobot Gravity 12-Bit I2C DAC Module is a compact digital-to-analogue converter based on the MCP4725 chip. It accurately converts digital values to precise analogue voltage signals, providing far cleaner output t...
Delivered by Wed 14 Oct
SparkFun Real Time Clock Module - RV-1805 (Qwiic)
SKU: SF-BOB-14558 | Brand: SparkFun
Get with the times, already! This SparkFun Real Time Clock (RTC) Module is a Qwiic-enabled breakout board for the RV-1805 chipset. The RTC is ultra-low power (running at only about 22nA in its lowest power settin...
Delivered by Wed 14 Oct
Adafruit BME680 - Temperature, Humidity, Pressure and Gas Sensor
SKU: AF-3660 | Brand: Adafruit
The BME680 from Bosch delivers comprehensive environmental sensing in a single compact package. This precision sensor measures temperature, humidity, barometric pressure, and VOC gas levels, all accessible over I2C or...
Delivered by Tue 27 Oct
SparkFun Qwiic OpenLog
SKU: SF-DEV-15164 | Brand: SparkFun
The SparkFun Qwiic OpenLog is an I²C-based data logger that stores serial data to a microSD card. Based on the popular OpenLog, this version replaces the serial interface with I²C and Qwiic connectors, allowing you to...
Delivered by Mon 5 Oct
SHT20 I2C Temperature Humidity Sensor (Waterproof Probe)
SKU: DF-SEN0227 | Brand: DFRobot
This SHT20 I2C temperature & humidity sensor is equipped with waterproof probe. It comes with the 4C CMOSens® SHT20 temperature & humidity sensor chip and the probe has gone through dual waterproof protection test...
Delivered by Wed 14 Oct
IIC LCD Backpack
SKU: DF-DFR0175 | Brand: DFRobot
This is a new IIC LCD backpack which supports Gadgeteer interface (IDC10). It allows gadgeteer user to play with LCD160X. The IIC LCD Backpack is a small PCB that can be soldered to the back of an LCD so tha...
Delivered by Wed 14 Oct
Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras
SKU: AF-789 | Brand: Adafruit
The Adafruit PN532 NFC/RFID Controller Shield brings 13.56 MHz NFC and RFID capabilities to your Arduino. Built around the PN532 chipset — the most widely used NFC controller, found in virtually every NFC-enabled phon...
Delivered by Tue 27 Oct
ESP32(ESP-WROOM-32) WiFi Bluetooth Dual-Core MCU Module
SKU: DF-TEL0111 | Brand: DFRobot
INTRODUCTION The ESP32 WiFi and Bluetooth chip is the latest generation of Espressif products. It has a dual-core 32-bit MCU, which integrates WiFi HT40 and Bluetooth/BLE 4.2 technology inside. Compare...
Delivered by Wed 14 Oct
micro:Maqueen Plus V2 (Ni-MH) with micro:Maqueen Mechanic
SKU: DF-MBT0021-EN-3 | Brand: DFRobot
This educational robot kit combines the micro:Maqueen Plus V2 AA vehicle body with the micro:Maqueen Mechanic set for building forklift, push, beetle and loader-style mechanisms. It is designed for micro:bit-based STE...
Delivered by Wed 14 Oct
Python Starter Kit for UNIHIKER M10 (Learn AI & IoT with 15 Lessons)
SKU: DF-KIT0194 | Brand: DFRobot
This expansion ecosystem transforms the UNIHIKER M10 single-board computer into a fully functional AIoT development station. By leveraging the modular DFRobot Gravity interface, the kit allows for the seamless integr...
Delivered by Mon 5 Oct
IR Thermal Imaging Camera Module – 80x62, Motion Detection, SPI/I2C, Raspberry Pi Compatible, 44° FOV
SKU: WS-31940 | Brand: Waveshare
Elevate your technological projects with our cutting-edge Long-wave IR Thermal Imaging Camera Module. Designed for seamless integration with Raspberry Pi and other development boards, this module is an ideal addition ...
Delivered by Tue 27 Oct
ELECFREAKS micro:bit Nezha Pro Ocean Kit
SKU: EF-EF08436 | Brand: ElecFreaks
The ELECFREAKS micro:bit Nezha Pro Ocean Kit is an ocean-themed STEM education kit that guides students through Ian's ocean adventure storyline with a project-based learning approach. Using electronic components and b...
Delivered by Mon 5 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared