All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Maixduino AI Development Kit K210 RISC-V AI + lOT ESP32
SKU: DF-KIT0157 | Brand: DFRobot
The Maixduino AI Development Kit combines the Kendryte K210 RISC-V dual-core AI processor with an ESP32 module for Wi-Fi and Bluetooth connectivity, all in an Arduino UNO-compatible form factor. The K210 features a bu...
Out of stock
Drum HAT
SKU: PR-PIM176 | Brand: Little Bird
Hook up these 8 advanced capacitive touch pads with LED indicators to start making sublime beats and control surfaces with your Raspberry Pi. Drum HAT is the much-requested companion to Piano HAT. It uses the same ...
Out of stock
Kitronik Prototyping System for the BBC micro:bit
SKU: KI-5609 | Brand: Kitronik
The Kitronik Prototyping System for the BBC micro:bit provides a ready-made platform for building circuits and experimenting with external components — no soldering required. It combines a pre-built edge connector bre...
Out of stock
Gravity: GP8101S 1-Channel PWM to 0-5V/10V DAC Module
SKU: DF-DFR1036 | Brand: DFRobot
A 1-channel DAC module that converts a PWM signal from any microcontroller into a precise 0–5V or 0–10V analogue voltage output. Built around the GP8101S chip with 8-bit resolution and 0.2% accuracy, it's ideal for dr...
Out of stock
Adafruit DVI Sock for Pico - Works with HDMI Displays
SKU: AF-5957 | Brand: Adafruit
The Adafruit DVI Sock is a compact DVI/HDMI output board designed to solder directly onto the end of a Raspberry Pi Pico or Pico W like a little PCB sock. Using the RP2040's PIO system, it enables your Pico to drive a...
Out of stock
Pico Air Monitoring Expansion
SKU: SB-21819 | Brand: Little Bird
The Pico Air Monitoring Expansion is a HAT for Raspberry Pi Pico that measures suspended particulate matter (PM1.0, PM2.5, and PM10) in the air. It uses a PMSA003 digital laser dust sensor and includes an onboard 0.91...
Out of stock
Rain/Steam Sensor
SKU: EC-SPM01021S | Brand: Elecrow
This water sensor works by having a series of exposed traces connected to ground and interlaced between the grounded traces are the sens traces. The sensor board has a demension of 5.0 x 4.0cm. There is also a on-boar...
Out of stock
ESP32-S2 Saola 1R Dev Kit featuring ESP32-S2 WROVER
SKU: AF-4693 | Brand: Adafruit
ESP32-S2 Saola-1 is a small-sized ESP32-S2 based development board produced by Espressif. Just about all of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either conn...
Out of stock
Mini Piano Module with I2C Interface for Micro: bit
SKU: EC-MIB02414P | Brand: Elecrow
Do you want to make your Micro: bit to be an instrument? Maybe we can make your dream come true with this piano module. There is interface for you to plug into your Micro: bit, four RGB LEDs make your board colorful. ...
Out of stock
Pico HAT Hacker
SKU: PR-PIM311 | Brand: Little Bird
The Pico HAT Hacker gives you full access to all 40 GPIO pins on your Raspberry Pi, broken out at the top of the board. Its ultra-thin 0.8 mm PCB can be soldered directly onto the Pi's header pins while still leaving ...
Out of stock
OnOff SHIM
SKU: PR-PIM277 | Brand: Little Bird
Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Our SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare boa...
Out of stock
OctoCam - Pi Zero W Project Kit
SKU: PR-PIM286 | Brand: Little Bird
A cute, connected, cephalopod camera to stick on your window or sit on your shelf! The OctoCam kit has everything* you'll need, including a Pi Zero W, a super-small 5MP camera, a fun octopus acrylic mount with four...
Out of stock
Mini Black HAT Hack3r -Retail Pack - Fully assembled
SKU: PR-PIM219 | Brand: Little Bird
The Mini Black HAT Hack3r is a compact breakout board that gives you full access to all Raspberry Pi GPIO pins while a HAT or pHAT is attached. Ideal for debugging HAT projects, probing signals, or combining a HAT wit...
Out of stock
Sharp GP2Y0D805Z0F Digital Distance Sensor 5cm
SKU: PL-1131 | Brand: Pololu
This small digital distance sensor detects objects between 0.5 cm and 5 cm (0.2″ and 2″) away. With its quick response time, small size, low current draw, and short minimum sensing distance, this sensor is a...
Out of stock
Mini Sparkle Motion with Pre-soldered Terminal Block
SKU: AF-6314 | Brand: Adafruit
The Adafruit Sparkle Motion Mini is part of our series of "Sparkle Motion" boards, which are our attempt to make the best small WLED-friendly smart LED driving board in the whole world. Our resident mermaid, firepixie...
Out of stock
Pixelblaze V3 Standard XL - WiFi LED Controller
SKU: AF-5942 | Brand: Adafruit
The Pixelblaze V3 Standard XL is a Wi-Fi addressable LED controller powered by an ESP32 dual-core processor at 240 MHz. It includes a web-based live pattern editor that lets you write, preview, and store LED patterns ...
Out of stock
Adafruit PiCowBell Camera Breakout - Wide Angle 160 Degree Lens
SKU: AF-5947 | Brand: Adafruit
The Adafruit PiCowbell OV5640 Camera Breakout with 160° Wide-Angle Lens adds a 5-megapixel camera with an ultra-wide 160-degree field of view to your Raspberry Pi Pico or Pico W. The widest lens option in the PiCowbel...
Out of stock
Raspberry Pi Retro Game Box DIY Arcade Fighting Joystick Push Buttons Controller
SKU: SU-RETROGAMEBOX | Brand: Little Bird
IntroductionRetro Game Box is generally a game controller, which implements control by GPIOs of the Raspberry Pi. It comes with a pretty and solid paper box, and needs just simple assembly before easy play with comfo...
Out of stock
SparkFun Thing Plus - ESP32-C6
SKU: SF-DEV-22924 | Brand: SparkFun
The SparkFun ESP32-C6 Thing Plus is a compact, user-friendly device packed with advanced technology, designed to enhance your wireless projects like never before. It features the Espressif™ ESP32-C6 WROOM-1-N16 modul...
Out of stock
SIM7600G-H-M2 4G Communication Module
SKU: DF-TEL0158 | Brand: DFRobot
The SIM7600G-H-M2 is the LTE Cat 4 module that supports wireless communication modes of LTE-TDD, LTE-FDD, HSPA+, GSM, GPRS, EDGE, etc. It supports maximum 150Mbps downlink rate and 50Mbps uplink rate.The SIM7600G-H-M2...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared