All Products

SKU: PR-PIM171 | Brand: Little Bird

A handy breakout tool that lets you access all 40 GPIO pins while a HAT or pHAT is connected to your Raspberry Pi. Plug in your HAT, connect the ribbon cable to your Pi, and probe, debug, or extend any pin with ease. ...

SKU: SF-SEN-14520 | Brand: SparkFun

The SparkFun Capacitive Touch Breakout provides a single momentary touch button using the AT42QT1011 capacitive sense chip. Simply supply 1.8–5 V and ground — the chip handles all touch monitoring and outputs a digita...

SKU: DF-DFR0031-G | Brand: DFRobot

This is a Piranha LED light module. A digital pin (LOW on, HIGH off) is used to control it. The brightness of LED can be controller via PWM output. APPLICATIONS DIY Projects Toys Games Audio indicator SPECIFICATIONS...

SKU: DF-DFR0238 | Brand: DFRobot

This small size breakout is programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It is designed to allow the easy addition of dynamic indicators, displays, and lig...

SKU: SF-COM-08033 | Brand: SparkFun

This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the bu...

SKU: PL-1137 | Brand: Pololu

The GP2Y0A02 is the longest-range optical distance sensor we carry, featuring a detection range of 8″ to 60″ (20 cm to 150 cm). The high maximum detection distance makes this sensor a viable alternative to ...

SKU: AF-381 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC ...

SKU: PL-837 | Brand: Pololu

The Vishay TSOP34156 is a general-purpose modulated IR receiver for IR-based remote-control projects. It features a wide operating voltage range and allows for relatively high data rates; this particular unit is tune...

SKU: EC-ACC35076R | Brand: Elecrow

This video tank robot vehicle uses ESP32 as the main board, with OV2640 camera, and can control the movement via WiFi. It has a digital microphone interface, which can adjust the volume. The APP can control the shooti...

SKU: WS-26837 | Brand: Waveshare

The RaspRover is an open-source, four-wheel-drive AI robot platform powered by a dual-controller architecture. A Raspberry Pi 4B or 5 (not included) handles high-level AI processing and computer vision, while an onboa...

SKU: WS-30706 | Brand: Waveshare

Unleash your creativity and develop interactive applications with the RP2350 2.8inch Capacitive Touch Display Development Board. This cutting-edge board is packed with features that make it perfect for hobbyists, educ...

SKU: WS-29962 | Brand: Waveshare

Unleash Your Creativity with the Vibrant ESP32-S3 1.3-inch Display Development BoardAre you ready to elevate your project with a splash of color and advanced functionality? The ESP32-S3 1.3-inch Display Development Bo...

SKU: WS-31159 | Brand: Waveshare

This compact development board from Waveshare combines the Raspberry Pi RP2350A microcontroller with a built-in 1.47″ LCD display, TF card slot, and RGB LED — all in a tiny form factor with pre-soldered headers and US...

SKU: WS-30581 | Brand: Waveshare

Elevate Your Raspberry Pi Projects with the Versatile Nano Base Board (B) for Compute Module 5Unleash the full potential of your Raspberry Pi Compute Module 5 (CM5) with the compact yet powerful Nano Base Board (B). D...

SKU: DF-DFR1055 | Brand: DFRobot

The ESP32-C6-DevKitM-1 is an entry-level development board built around the ESP32-C6-MINI-1 module, featuring a RISC-V 32-bit single-core processor running at up to 160 MHz. It integrates Wi-Fi 6 (2.4 GHz), Bluetooth ...

SKU: EC-DTS02018B | Brand: Elecrow

This expansion board is an IO port expansion board that supports micro: bit. It can draw out all resources on the micro: bit and also comes with a buzzer. By connecting the jumper cap to the P0 pin, the P0 pin can be ...

SKU: AF-5906 | Brand: Adafruit

The Adafruit Proto Doubler PiCowbell gives your Raspberry Pi Pico or Pico W two side-by-side socket slots — plug in your Pico on one side and a PiCowbell accessory on the other, no soldering or stacking headers requir...

SKU: SF-COM-23979 | Brand: SparkFun

Does your microcontroller need to control a high-voltage item, like a 12V LED strip, while also needing to be powered? Do you want to avoid having multiple power adapters and microcontrollers for your project? The MOS...

SKU: SF-DEV-22924 | Brand: SparkFun

The SparkFun ESP32-C6 Thing Plus is a compact, user-friendly device packed with advanced technology, designed to enhance your wireless projects like never before. It features the Espressif™ ESP32-C6 WROOM-1-N16 modul...

SKU: PR-PIM672 | Brand: Little Bird

Introducing the Inventor HAT Mini, a versatile motor, servo, and audio driver add-on board designed for Raspberry Pi enthusiasts. With this compact HAT, you can bring your mechanical inventions, creations, and cont...