All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Force Sensitive Resistor - Small
SKU: SF-SEN-09673 | Brand: SparkFun
A compact force sensitive resistor (FSR) from Interlink Electronics with a 4 mm (0.16″) diameter active sensing area. The resistance changes based on applied pressure — from over 1 MΩ with no pressure down to approxim...
Delivered by Thu 6 Aug
LoRaWAN Control Terminal (US 915MHz, 4km Range, RS485)
SKU: DF-DFR1120-915 | Brand: DFRobot
The LoRaWAN Control Terminal is a comprehensive Industrial IoT (IIoT) node that bridges field devices with remote cloud platforms. Operating on the US 915MHz band with up to 4km range, this DIN-rail mountable controll...
Delivered by Thu 6 Aug
Potentiometer - Thumbwheel Type, 25kΩ - SparkFun Electronics
SKU: SF-COM-28384 | Brand: SparkFun
A compact thumbwheel potentiometer for adding analog control to your projects. The ergonomic wheel design allows for easy adjustment with one finger, making it perfect for volume controls, parameter adjustment, and us...
Delivered by Mon 17 Aug
Gravity: Linear / Analog Hall Effect Sensor with ±1200 GS Magnetic Field Range
SKU: DF-DFR1132 | Brand: DFRobot
##Introduction Gravity: Linear/Analog Hall Sensor is a high-precision device designed for measuring and monitoring magnetic field strength. Advanced Hall effect circuitry at the core converts magnetic induction streng...
Delivered by Mon 17 Aug
Sensor ELECFREAKS PlanetX MQ3
SKU: EF-EF05032 | Brand: ElecFreaks
An alcohol vapour sensor module from the ELECFREAKS PlanetX range, designed for use with micro:bit via an RJ11 connector. The MQ3 sensor uses a tin dioxide (SnO2) sensing element whose conductivity increases with alco...
Delivered by Mon 17 Aug
Sensor Trimpot ELECFREAKS PlanetX
SKU: EF-EF05018 | Brand: ElecFreaks
An analogue trimpot (trimmer potentiometer) sensor module from the ELECFREAKS PlanetX series, designed for use with micro:bit via RJ11 connection. The potentiometer provides stepless rotation over a 0°–300° range, out...
Delivered by Thu 6 Aug
Line Follower Sensor
SKU: SF-SEN-24048 | Brand: SparkFun
A line follower sensor gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measuring the amount of reflected infrared ligh...
Delivered by Mon 17 Aug
Adafruit RP2040 Feather ThinkInk for 24-pin E-Paper Display
SKU: AF-5727 | Brand: Adafruit
The Adafruit RP2040 Feather ThinkInk makes it easy to connect almost any common e-Paper/e-Ink display with a standard 24-pin FPC connector. E-paper displays retain their image even when power is completely disconnecte...
Delivered by Thu 6 Aug
Pimoroni Inventor HAT Mini for Raspberry Pi
SKU: AF-5736 | Brand: Adafruit
A versatile motor, servo, and audio driver HAT for Raspberry Pi. Bring your mechanical inventions, creations, and contraptions to life! Inventor HAT Mini helps transform a Raspberry Pi computer into a robot, pro...
Delivered by Fri 28 Aug
Motorized Slide Potentiometer - 10KΩ Linear with 5V DC Motor
SKU: AF-5466 | Brand: Adafruit
A 10KΩ linear slide potentiometer with a built-in geared DC motor underneath the slider. The motor can move the wiper up and down programmatically, while the slider also moves freely by hand when the motor is unpowere...
Delivered by Fri 28 Aug
MyoWare 2.0 Arduino Shield
SKU: SF-DEV-18426 | Brand: SparkFun
The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would...
Delivered by Mon 17 Aug
ESP32-C3-MINI-1-N4 Module (PCB antenna)
SKU: DF-DFR0809 | Brand: DFRobot
The ESP32-C3-MINI-1-N4 is a compact Wi-Fi and Bluetooth Low Energy module from Espressif, built around the ESP32-C3FN4 chip with a 32-bit RISC-V single-core processor running at up to 160 MHz. It includes 4 MB of embe...
Delivered by Thu 6 Aug
Adafruit Bonsai Buckaroo - micro:bit & CLUE Plant Care Helper
SKU: AF-4534 | Brand: Adafruit
The Bonsai Buckaroo is a compact add-on board for micro:bit and Adafruit CLUE that turns your board into a plant care monitoring and watering system. Bolt it on with 5 screws to get a buzzer, motor driver, and soil mo...
Delivered by Fri 28 Aug
Adafruit Touch Screen Breakout Board for 4 pin 1.0mm FPC
SKU: AF-3575 | Brand: Adafruit
The Adafruit Touch Screen Breakout Board provides a simple way to connect a 4-wire resistive touch panel with a 1.0mm pitch FPC connector to your project. The connector is soldered onto a compact breakout board, with ...
Delivered by Fri 28 Aug
ESP32-S3-DevKitC-1-N8 - ESP32-S3-WROOM-1 Dev Board - 8MB Flash
SKU: AF-5312 | Brand: Adafruit
The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. This version is e...
Delivered by Fri 28 Aug
Adafruit Feather RP2040
SKU: AF-4884 | Brand: Adafruit
The Feather RP2040 brings the Raspberry Pi RP2040 dual-core processor to the Feather platform. With two ARM Cortex M0+ cores running at ~125 MHz, 264 KB SRAM, 8 MB SPI flash, and the RP2040's unique PIO (Programmable ...
Delivered by Fri 28 Aug
Thumb Joystick - Deluxe
SKU: SF-COM-16273 | Brand: SparkFun
A 16 mm deluxe thumb joystick similar to the analogue sticks found in PlayStation controllers. Two 10K potentiometers provide analogue position data for the full range of motion on both axes, and a built-in select but...
Delivered by Mon 17 Aug
Octopus Temperature Sensor Brick TMP36 Analog for Arduino Micro:bit
SKU: EF-EF04079 | Brand: ElecFreaks
Octopus TMP36 Temperature Sensor Brick is a temperature sensor with low voltage and accurate celsius read. It can provide voltage output,which forms a linear relationship with celsius temperature. TMP36 do not need an...
Delivered by Thu 6 Aug
Strain Gauge Load Cell - 4 Wires - 1Kg
SKU: AF-4540 | Brand: Adafruit
A strain gauge is a type of electronic sensor used to measure force or strain (big surprise there). They are made of an insulating flexible backing with a metallic foil pattern. The resistance of a strain gauge change...
Delivered by Fri 28 Aug
RP-C18.3-ST Thin Film Pressure Sensor
SKU: DF-SEN0294 | Brand: DFRobot
This is a circular flexible thin film pressure sensor of short legs with a diameter of 18.3mm, which can be used to realize highly sensitive detection of pressure. The sensor is durable and designed to sense static an...
Delivered by Mon 17 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
