All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
ESP32-S2- SOLO Wi-Fi Module (PCB Antenna)
SKU: DF-DFR0743-SOLO | Brand: DFRobot
ESP32-S2- SOLO is a generic WiFi MCU module featuring rich peripherals and high performance. The module has 38 pins and 4 MB SPI flash. With the smallest size of 18×25.5×3.1mm among the S2 modules, it is ver...
Delivered by Tue 23 Jun
ESP32-S2-WROVER Wi-Fi Module (PCB Antenna)
SKU: DF-DFR0743-WROVER | Brand: DFRobot
The ESP32-S2-WROVER is a Wi-Fi MCU module built around the ESP32-S2 chip with 4 MB SPI flash and 2 MB PSRAM. The additional PSRAM makes it well suited for applications requiring larger data buffers, such as audio and ...
Delivered by Tue 23 Jun
ESP32-S2-WROOM Wi-Fi Module (PCB Antenna)
SKU: DF-DFR0743-WROOM | Brand: DFRobot
ESP32-S2- WROOM is a generic WiFi MCU module featuring rich peripherals and high performance. The module has 42 pins and 4MB flash, which can perform stable performance in industrial scenes.At the core of th...
Delivered by Tue 23 Jun
Evaluation Board for Audio BLE/SPP Pass-through Module - Bluetooth 5.0
SKU: DF-DFR0782 | Brand: DFRobot
An evaluation board for a dual-mode Bluetooth 5.0 module that handles both wireless audio and serial data pass-through simultaneously. It can play audio from U-disk or TF card, stream audio over Bluetooth, handle Blue...
Delivered by Tue 23 Jun
SparkFun MicroMod ESP32 Processor
SKU: SF-WRL-16781 | Brand: SparkFun
The SparkFun MicroMod ESP32 Processor Board brings Espressif's ESP32 into the MicroMod ecosystem via the M.2 connector interface. It provides WiFi and Bluetooth connectivity with the processing power of a dual-core Te...
Delivered by Fri 12 Jun
Hydrogen Sulfide Gas Sensor - MQ-136
SKU: SF-SEN-17052 | Brand: SparkFun
The MQ-136 is a Hydrogen Sulfide detection sensor with a sensing range of 1 - 200ppm. The sensing element is SnO2, which has lower conductivity in clean air. When H₂S gas exists, the sensor’s conductivity gets higher ...
Delivered by Tue 23 Jun
Homefixer ESP8266 devboard
SKU: EC-DTE00413H | Brand: Elecrow
Another development board for ESP8266-12F. But this one is a bit different, made to be easy to set up without the need for additional hardware like programmers and voltage regulators. A wide voltage range switching re...
Delivered by Fri 26 Jun
Adafruit TMP235 - Plug-and-Play STEMMA Analog Temperature Sensor - TMP235
SKU: AF-4686 | Brand: Adafruit
The Adafruit TMP235 is a plug-and-play analog temperature sensor with a 3-pin JST PH (STEMMA) connector. Unlike I2C sensors, this one outputs a simple analog voltage proportional to temperature — just connect it to an...
Delivered by Thu 2 Jul
Strain Gauge Load Cell - 4 Wires - 10Kg
SKU: AF-4542 | Brand: Adafruit
A 10 kg strain gauge load cell for measuring force, weight, and tension. The strain gauge is epoxy-bonded to a robust aluminium bar that protects the delicate foil element and constrains deflection to a safe range. As...
Delivered by Thu 2 Jul
Octopus Rotary Encoder Brick OBEncoder
SKU: EF-EF04038 | Brand: ElecFreaks
Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...
Delivered by Tue 23 Jun
Gravity: URM09 Analog Ultrasonic Sensor
SKU: DF-SEN0307 | Brand: DFRobot
The DFRobot URM09 is an analog output ultrasonic distance sensor optimised for fast ranging and obstacle avoidance. With a maximum measurement rate of 30Hz, built-in temperature compensation, and a range of 2–500cm, i...
Delivered by Tue 23 Jun
TS01 Non-contact IR Temperature Sensor 0-3V
SKU: DF-SEN0256 | Brand: DFRobot
The DFRobot TS01 is a non-contact infrared temperature sensor that measures surface temperature via infrared radiation. The all-metal IP65 housing provides protection against impact, water, and dust, making it suitabl...
Delivered by Tue 23 Jun
TS01 Non-contact IR Temperature Sensor 4-20mA
SKU: DF-SEN0264 | Brand: DFRobot
DFRobot TS01 IR temperature sensor is a non-contact thermal sensor, which can be used to measure the infrared intensity of the object so as to calculate its surface temperature without touching. The built-in temperatu...
Delivered by Tue 23 Jun
4-20SC-MaxSonar-WRMI(MB7789)
SKU: DF-SEN0267 | Brand: DFRobot
The MB7789 4-20SC-MaxSonar-WRMI is a rugged, weather-resistant ultrasonic distance sensor with self-cleaning capability, designed for outdoor applications in high-moisture or condensation-prone environments. It provid...
Delivered by Tue 23 Jun
Octopus Linear Slider Potentiometer Brick
SKU: EF-EF04061 | Brand: ElecFreaks
A linear sliding potentiometer module from the ElecFreaks Octopus series. Provides an analogue voltage output proportional to the slider position, making it useful as a variable input for controlling volume, brightnes...
Delivered by Fri 12 Jun
QTRX-HD-04A Reflectance Sensor Array: 4-Channel, 4mm Pitch, Analog Output, Low Current
SKU: AF-4404 | Brand: Adafruit
These reflectance sensors feature a linear array of IR emitter/phototransistor pair modules in a high-density (4 mm pitch) arrangement, which makes them well suited for applications that require precise detection...
Delivered by Thu 2 Jul
LilyPad Light Sensor
SKU: SF-DEV-14629 | Brand: SparkFun
The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shi...
Delivered by Tue 23 Jun
Thermocouple Type-K Glass Braid Insulated - 5m
SKU: AF-3895 | Brand: Adafruit
Thermocouples are best used for measuring temperatures that can go above 100°C. This is a bare-wire bead-probe which can measure air or surface temperatures. Most inexpensive thermocouples have a vinyl covering whi...
Delivered by Thu 2 Jul
pin:bit
SKU: PR-PIM352 | Brand: Little Bird
pin:bit breaks out all of the useful pins from your micro:bit into breadboard format while providing handy-dandy labels to make your builds go smoothly. It's ideal for building small circuits on a breadboard, ...
Delivered by Fri 12 Jun
IR distance sensor includes cable (20cm-150cm) [GP2Y0A02YK]
SKU: AF-1031 | Brand: Adafruit
This SHARP distance sensor bounces IR off objects to determine how far away they are. It returns an analog voltage that can be used to determine how close the nearest object is. Comes with 8" long 3-JST interface wire...
Delivered by Thu 2 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
