All Products

SKU: AF-512 | Brand: Adafruit

A PSP/Xbox-style analog thumb joystick with a built-in press-to-select button, mounted on a breakout board designed for easy panel mounting. Unlike simple directional joysticks, this analog stick provides precise, pro...

SKU: SF-SEN-12566 | Brand: SparkFun

The ALS-PT19 is a compact SMD ambient light sensor, significantly smaller than standard through-hole alternatives like the TEMT6000. Functioning as an NPN phototransistor, it provides an analogue voltage output propor...

SKU: SF-BOB-09816 | Brand: SparkFun

This is a simple 5V Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path. The bandw...

SKU: DF-DFR0018 | Brand: DFRobot

This is DFRobot's basic sensor set for arduino. Set includes light sensor, touch sensor, temperature sensor, magnetic sensor, vibration sensor, tilt sensor, big button, LED lighting module and Grayscale sensor. ...

SKU: DF-SEN0221 | Brand: DFRobot

The Hall Angle Sensor is a miniature 360 degree sensor which works based on the principle of the Hall effect. It is compatible with the DFRobot Gravity sensor interface, and works with a 5V DC power supply. The ...

SKU: DF-SEN0019 | Brand: DFRobot

This is an Arduino infrared distance sensor. It has an adjustable detection range, 3cm - 80cm. It is small, easy to use, assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line,...

SKU: LB-DHT11-SENSOR | Brand: Little Bird

The Little Bird DHT11 Temperature and Humidity Sensor Module provides calibrated digital temperature and humidity readings from a single sensor. Designed and made in Sydney, Australia, it requires no extra components ...

SKU: LB-LR0102 | Brand: Little Bird

The DHT22 (also known in Australia by RHT03) is a low cost humidity and temperature sensor with a single wire digital interface. The sensor comes pre-calibrated and in a breadboard compatible module form so you don...

SKU: EC-DTE01016K | Brand: Elecrow

The ESP32-A1S Audio Development Kit is a feature-rich audio development board built around the ESP32-A1S module. It includes a dual-core Xtensa LX6 processor, Wi-Fi, Bluetooth 4.2, and a complete set of audio interfac...

SKU: AF-3269 | Brand: Adafruit

The Espressif ESP32 Development Board breaks out all ESP32 module pins to standard 2.54 mm (0.1 in) headers, with a CP2102 USB-to-serial adapter for programming, boot and reset buttons, and an onboard 3.3 V regulator....

SKU: EC-SSE01209P | Brand: Elecrow

This is a high-precision temperature control module, it can not only show the temperature, but also according to the current temperature of the relay control, it can control some of the power equipment through the ...

SKU: EC-MCS01005S | Brand: Elecrow

This Arduino Nano IO Shield can easy support Nano and Pro. Because the Arduino Nano and Pro is too small to connect to jumper wires or breadboard. So this Nano IO Shield is born. The shield has lead out all IOs of ...

SKU: SF-BOB-11570 | Brand: SparkFun

TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connect...

SKU: AF-5336 | Brand: Adafruit

The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. This version is e...

SKU: SS-113991054 | Brand: Seeed Studio

The Seeed Studio XIAO ESP32C3 is a compact microcontroller board built around the ESP32-C3 RISC-V SoC. It features complete Wi-Fi and Bluetooth 5.0/BLE connectivity in the signature XIAO thumb-sized form factor (21 × ...

SKU: PI-COM1004 | Brand: Pimoroni

You'll find these rotary potentiometers in our Maker Essentials kit, but they're so useful we decided to offer them on their own! Pair them with something like our Explorer HAT Pro or Explorer pHAT to rea...

SKU: PI-PSA001 | Brand: Pimoroni

The Pulse Sensor Amped is a plug-and-play heart-rate sensor for Arduino. It detects pulse by measuring changes in reflected light as blood pumps through your tissues, providing a real-time analogue signal that fluctua...

SKU: PL-2458 | Brand: Pololu

The QTR-1A reflectance sensor carries a single infrared LED and phototransistor pair in an inexpensive, tiny 0.5" x 0.3" module that can be mounted almost anywhere and is great for edge detection and line fo...

SKU: AF-5628 | Brand: Adafruit

A compact, self-centering analogue thumbstick with a feel and size similar to Nintendo Joy-Con joysticks. It uses two 10kΩ potentiometers (one for each axis) to provide proportional X/Y analogue output, plus a centre-...

SKU: AF-4333 | Brand: Adafruit

The Circuit Playground Bluefruit builds on the popular Circuit Playground Express by upgrading to an nRF52840 microcontroller with built-in Bluetooth Low Energy. The round board is packed with sensors, LEDs, and input...