All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Adafruit NeoPixel Breakout with JST SH Connectors
SKU: AF-5975 | Brand: Adafruit
A compact single-NeoPixel breakout board with mounting holes and pluggable JST SH connectors, perfect for adding individually addressable RGB lighting to small projects. The PCB measures less than 13 × 13 mm and works...
Delivered by Mon 23 Nov
Fermion: MEMS Ethanol EtOH Gas Detection Sensor (Breakout, 1-500ppm)
SKU: DF-SEN0569 | Brand: DFRobot
The Fermion MEMS Ethanol (EtOH) Gas Detection Sensor uses micro-electromechanical system (MEMS) technology for compact, low-power ethanol gas detection. With a detection range of 1–500 ppm, it provides qualitative mea...
Delivered by Mon 23 Nov
Fermion: MEMS Hydrogen Sulfide H2S Gas Detection Sensor (Breakout, 0.5-50ppm)
SKU: DF-SEN0568 | Brand: DFRobot
Fermion: MEMS Hydrogen Sulfide H2S Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20m...
Delivered by Mon 23 Nov
Gravity: I2C SCD41 Infrared CO2 Sensor (400 - 5000 ppm)
SKU: DF-SEN0536 | Brand: DFRobot
The Gravity SCD41 Infrared CO2 Sensor provides accurate carbon dioxide, temperature, and humidity measurements in a single compact module. Based on Sensirion's SCD41 sensor, it uses photoacoustic NDIR (non-dispersive ...
Delivered by Mon 23 Nov
Adafruit Si5351A Clock Generator with STEMMA QT - 8KHz to 160MHz
SKU: AF-5640 | Brand: Adafruit
The Adafruit Si5351A Clock Generator with STEMMA QT lets you generate precise, arbitrary clock frequencies from 8 kHz to over 150 MHz using a simple I2C interface. This updated version adds STEMMA QT / Qwiic connector...
Delivered by Mon 23 Nov
SparkFun Indoor Air Quality Sensor - ENS160 (Qwiic)
SKU: SF-SEN-20844 | Brand: SparkFun
The SparkFun ENS160 Indoor Air Quality Sensor is a digital multi-gas sensor solution with four sensor elements that can be used in a wide range of applications including building automation, smart home, and HVAC. The ...
Delivered by Mon 23 Nov
Adafruit Ultimate GPS Breakout with GLONASS + GPS - PA1616D
SKU: AF-5440 | Brand: Adafruit
The Adafruit Ultimate GPS Breakout with GLONASS + GPS is an enhanced version of the popular Ultimate GPS, built around the MTK3333 chipset with PA1616D module. It supports both GPS and GLONASS satellite networks, trac...
Delivered by Mon 23 Nov
4-Channel Level Converter (12V to 3.3V)
SKU: DF-DFR0913 | Brand: DFRobot
This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 3.3V, making it easy to interface industrial sensors and PLC outputs with Arduino, Raspberry Pi, and other 3.3V microcontrolle...
Delivered by Mon 23 Nov
Humidity and Temperature Sensor - DHT20
SKU: SF-SEN-18364 | Brand: SparkFun
The DHT20 is a factory-calibrated digital humidity and temperature sensor with an I²C interface. An upgrade to the popular DHT11/DHT22 series, it provides reliable environmental measurements without requiring addition...
Delivered by Mon 23 Nov
Adafruit SPI Non-Volatile FRAM Breakout - 2 Mbit / 256 KBytes - MB85RS2MTA
SKU: AF-4718 | Brand: Adafruit
The Adafruit SPI Non-Volatile FRAM Breakout provides 2 Mbit (256 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no p...
Delivered by Mon 23 Nov
Adafruit SPI Non-Volatile FRAM Breakout - 4 Mbit / 512 KBytes - MB85RS4MT
SKU: AF-4719 | Brand: Adafruit
The Adafruit SPI Non-Volatile FRAM Breakout provides 4 Mbit (512 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no p...
Delivered by Mon 23 Nov
7-segment for micro:bit by Monk Makes
SKU: MM-SKU00066 | Brand: Monk Makes
The 7-Segment for micro:bit by Monk Makes is a 4-digit 7-segment display designed specifically for BBC micro:bit. It can display numbers, letters, and limited characters using simple serial communication from a single...
Delivered by Mon 23 Nov
SparkFun Atmospheric Sensor Breakout - BME280 (Qwiic)
SKU: SF-SEN-15440 | Brand: SparkFun
The BME280 Atmospheric Sensor Breakout measures barometric pressure, relative humidity, and temperature from a single compact board. With both Qwiic (I2C) and 0.1″ header connections, it integrates easily into Arduino...
Delivered by Mon 23 Nov
Octopus Rain/Steam Sensor
SKU: EF-EF04024 | Brand: ElecFreaks
This is a Rain/steam sensor from ElecFreaks. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up.You even co...
Delivered by Mon 23 Nov
ADXL345 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI
SKU: AF-1231 | Brand: Adafruit
The ADXL345 from Analog Devices is a triple-axis digital accelerometer with both I2C and SPI interfaces. This breakout board includes an on-board 3.3V regulator and logic-level shifting, making it easy to interface wi...
Delivered by Mon 23 Nov
ESP8266 SMT Module - ESP-12
SKU: PI-COM2800 | Brand: Pimoroni
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client...
Delivered by Mon 23 Nov
T-Slot Photo Interrupter
SKU: AF-3986 | Brand: Adafruit
This T-Slot Photo Interrupter is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR light acro...
Delivered by Mon 23 Nov
Optical Fingerprint Sensor Module
SKU: LB-LR0214-73A | Brand: Little Bird
Secure your project with biometrics - this all-in-one optical fingerprint sensor will make adding fingerprint detection and verification super simple. These modules are typically used in safes - there's a high powered...
Delivered by Mon 23 Nov
Alcohol sensor for Arduino
SKU: LB-LR0205 | Brand: Little Bird
An alcohol sensor module for Arduino with both digital (TTL) and analog output. It detects alcohol vapour in the 10–1000 PPM range, with analog output voltage increasing proportionally with concentration. The module a...
Delivered by Mon 23 Nov
Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit [MPR121]
SKU: AF-2340 | Brand: Adafruit
The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clip...
Delivered by Mon 23 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared