All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Adafruit PDM Microphone Breakout with JST SH Connector
SKU: AF-4346 | Brand: Adafruit
The Adafruit PDM Microphone Breakout with JST SH Connector provides a digital audio input using Pulse Density Modulation (PDM) in a compact, cable-ready form factor. The 4-pin JST SH connector (3V, GND, DAT, CLK) pair...
Delivered by Tue 15 Dec
LV-MaxSonar-EZ4(MB1040)
SKU: DF-SEN0275 | Brand: DFRobot
The MB1040 LV-MaxSonar-EZ4 is a compact ultrasonic range sensor from MaxBotix that provides distance measurements from 15 cm to 645 cm (6" to 254") with 2.5 cm (1") resolution. It features the narrowest beam width of ...
Delivered by Wed 2 Dec
SparkFun Ambient Light Sensor - VEML6030 (Qwiic)
SKU: SF-SEN-15436 | Brand: SparkFun
The SparkFun VEML6030 Ambient Light Sensor is a high-accuracy, 16-bit light sensor that measures ambient light in lux with a spectral response similar to the human eye. It connects via the Qwiic I2C system for solderl...
Delivered by Wed 2 Dec
SparkFun gator:soil - micro:bit Accessory Board
SKU: SF-SEN-15272 | Brand: SparkFun
If your plants could talk, would they call out "Water me, Seymour?" Unfortunately (or fortunately, perhaps) plants have yet to develop the ability to speak. But thanks to the SparkFun gator:soil micro:bit Accessory Bo...
Delivered by Mon 23 Nov
SparkFun Buck-Boost Converter
SKU: SF-COM-15208 | Brand: SparkFun
The SparkFun Buck-Boost Converter is a handy power accessory board that allows you to fine tune the amount of power your project receives. This converter can take an input voltage of anywhere from 3-16V which can then...
Delivered by Wed 2 Dec
SPIDriver by Excamera Labs
SKU: AF-4268 | Brand: Adafruit
SPIDriver is an easy-to-use tool for controlling SPI devices and a great tool to help with quick driver development and debugging. It works with Windows, Mac, and Linux, and has a built-in color screen that shows a li...
Delivered by Tue 15 Dec
Octopus Photo Interrupter Sensor
SKU: EF-EF04012 | Brand: ElecFreaks
Photo Interrupter Sensor is a sensor module based on ITR9608 photoelectric switch, together with special Arduino shield in use. It has been widely used in parts counting, motor speed and so on. Three pins electronic b...
Delivered by Mon 7 Dec
SparkFun Distance Sensor Breakout - 4 Meter, VL53L1X (Qwiic)
SKU: SF-SEN-14722 | Brand: SparkFun
This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X uses a VCSEL (V...
Delivered by Mon 23 Nov
SparkFun Triple Axis Magnetometer Breakout - MLX90393 (Qwiic)
SKU: SF-SEN-14571 | Brand: SparkFun
It’s time to start utilizing the superior magnetometer, and what better way than to throw it onto an easy-to-use breakout board? The SparkFun MLX90393 Magnetometer Breakout is a triple-axis magnetic sensor bo...
Delivered by Wed 2 Dec
DC-DC Buck-Mode Power Module (5.5~28V to 3.3V 3A)
SKU: DF-DFR0570 | Brand: DFRobot
This is a DC-DC buck-mode power module, with input voltage range 5.5~28V and fixed output voltage/current 3.3V/3A. Its work frequency can reach to 0.5MHz. The module has high conversion and tiny body, convenient to em...
Delivered by Wed 2 Dec
Gravity: I2C 16x2 Arduino LCD with RGB Font Display (Black)
SKU: DF-DFR0554 | Brand: DFRobot
The Gravity I2C 16×2 LCD features RGB font colours on a black background, allowing you to display text in any of 16 million colour combinations. Using the Gravity I2C interface, only two data lines are needed for both...
Delivered by Wed 2 Dec
LilyPad Light Sensor
SKU: SF-DEV-14629 | Brand: SparkFun
The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shi...
Delivered by Wed 2 Dec
5V 1.8A Isolated Output PoE Module Works with Raspberry Pi 3 B+
SKU: AF-3848 | Brand: Adafruit
An isolated Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.8 A. The built-in isolation transformer ensures there is no direct electric...
Delivered by Tue 15 Dec
5V 1.5A Output PoE Module - Works with Raspberry Pi 3 B+
SKU: AF-3847 | Brand: Adafruit
A compact Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.5 A. Connect the four input wires to the PoE pins on your Ethernet-capable bo...
Delivered by Tue 15 Dec
ESP32-WROVER-B Module - ESP32 with PSRAM Module
SKU: AF-3979 | Brand: Adafruit
The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabi...
Delivered by Tue 15 Dec
Adafruit HTU21D-F Temperature Humidity Sensor Breakout Board - Fully Assembled
SKU: AF-3515 | Brand: Adafruit
The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's...
Delivered by Mon 23 Nov
Gravity:Digital Magnetic Sensor
SKU: DF-DFR0033 | Brand: DFRobot
what's the best way to detect the magnet? Use anther magnet. But it's not sensitive enough. You have to feel it by youself.Right.This magnetic sensor knows whether there is a magnetic object nearby or not. And it c...
Delivered by Mon 23 Nov
pin:bit
SKU: PR-PIM352 | Brand: Little Bird
pin:bit breaks out the useful pins from your micro:bit into a breadboard-friendly format, with clear labels to help keep your builds tidy and easy to follow.It is ideal for building small circuits on a breadboard and ...
Delivered by Mon 23 Nov
Realtek Ameba-RTL8195AM WiFi NFC Module wireless remote control/ telecontrol: Gravity: 315MHz RF Receiver Module
SKU: DF-DFR0477 | Brand: DFRobot
The Realtek Ameba RTL8195AM is an IoT microcontroller module that combines a 32-bit ARM Cortex-M3 MCU (166 MHz) with Wi-Fi 802.11 b/g/n and NFC (Near Field Communication) on a single chip. It supports Arduino and Micr...
Delivered by Wed 2 Dec
SparkFun GPS Breakout - XA1110 (Qwiic)
SKU: SF-GPS-14414 | Brand: SparkFun
The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chips...
Delivered by Wed 2 Dec
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared