All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
ELECFREAKS PlanetX Waterproof 18B20 Temperature Sensor
SKU: EF-EF05041 | Brand: ElecFreaks
The PlanetX Waterproof 18B20 Temperature Sensor is a sensor that senses temperature and converts it into a usable output signal. It is waterproof and can be used for temperature measurement. It is usually used for the...
Delivered by Mon 17 Aug
Adafruit USB Type C Power Delivery Dummy - I2C or Switchable
SKU: AF-5991 | Brand: Adafruit
The Adafruit USB Type C Power Delivery Dummy (I2C or Switchable) lets you tap into USB-C Power Delivery to get 5V, 9V, 12V, 15V, 18V, or 20V from any compatible USB-C charger or wall adapter — no soldering required. B...
Delivered by Fri 28 Aug
SparkFun Ultrasonic Distance Sensor - TCT40 (Qwiic)
SKU: SF-SEN-24805 | Brand: SparkFun
The SparkFun Qwiic Ultrasonic Distance Sensor, a user-friendly upgrade to the popular HC-SR04 sensor, offers non-contact distance measurement from 2cm to 400cm with an accuracy of 3mm. This sensor is designed to seaml...
Delivered by Mon 17 Aug
Espressif Ethernet - ESP Thread BR-Zigbee GW_SUB
SKU: SF-WRL-25498 | Brand: SparkFun
A Sub-Ethernet daughter board which works with the ESP Thread Border Router board to extend an Ethernet interface. This allows you to use Ethernet with the fully featured Thread Border Router.
Delivered by Mon 17 Aug
Adafruit DS2484 I2C to 1-Wire Bus Adapter Breakout
SKU: AF-5976 | Brand: Adafruit
The Adafruit DS2484 is a single-channel I2C-to-1-Wire bus adapter breakout with built-in ESD protection and split supply support. Simply connect it to an existing I2C bus and use the screw terminals to attach DS18B20 ...
Delivered by Fri 28 Aug
Adafruit TSMP96000 "Code Learning" Infrared IR Receiver Breakout
SKU: AF-5970 | Brand: Adafruit
The Adafruit TSMP96000 "Code Learning" Infrared IR Receiver Breakout detects IR signals across a wide frequency range of 20–60 KHz, making it perfect for "code learning" applications where you need your device to work...
Delivered by Fri 28 Aug
Adafruit Chainable DS18B20 Extender Breakout - STEMMA JST PH 2mm
SKU: AF-5971 | Brand: Adafruit
The Adafruit Chainable DS18B20 Extender Breakout makes it easy to connect multiple DS18B20 temperature sensors in a daisy chain using standard STEMMA JST PH 2mm cables. Each breakout includes screw terminal blocks for...
Delivered by Fri 28 Aug
Adafruit SEN54 or SEN55 Adapter Breakout - STEMMA QT / Qwiic
SKU: AF-5964 | Brand: Adafruit
The Adafruit SEN54/SEN55 Adapter Breakout lets you quickly connect a Sensirion SEN5x environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding requ...
Delivered by Fri 28 Aug
Digi XBee® RR Module - PCB Antenna
SKU: SF-WRL-22626 | Brand: SparkFun
XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking....
Delivered by Mon 17 Aug
MyoWare 2.0 Wireless Shield
SKU: SF-DEV-23387 | Brand: SparkFun
The MyoWare® 2.0 Wireless Shield is designed to take in readings from the MyoWare 2.0 Muscle Sensor and wirelessly transmit sensor data with the ESP32-WROOM! This shield also includes a built-in LiPo battery to remote...
Delivered by Mon 17 Aug
Adafruit BNO055 + BMP280 BFF Add-On for QT Py
SKU: AF-5937 | Brand: Adafruit
The Adafruit BNO055 + BMP280 BFF is a compact add-on board that gives any QT Py or Xiao board powerful 9-degree-of-freedom (9-DoF) motion sensing plus barometric pressure and altitude measurement. It mounts directly o...
Delivered by Fri 28 Aug
Adafruit ADG728 1-to-8 Analog Matrix Switch
SKU: AF-5899 | Brand: Adafruit
The Adafruit ADG728 is a solid-state 1-to-8 analog matrix switch controlled over I2C. Unlike relays, analog switches have no moving parts, won't wear out, and switch in approximately 100 ns. Use it to route up to 8 an...
Delivered by Fri 28 Aug
Adafruit DC Power BFF Add-On for QT Py
SKU: AF-5882 | Brand: Adafruit
The Adafruit DC Power BFF Add-On lets you power your QT Py or Xiao development board from a DC source up to 20V. The on-board MPM3610 integrated buck converter steps down the input to 5V at up to 1A, with no heat sink...
Delivered by Fri 28 Aug
SparkFun Triband GNSS RTK Breakout - UM980
SKU: SF-GPS-23286 | Brand: SparkFun
The SparkFun Triband GNSS RTK Breakout features the UM980 GNSS high precision RTK position module from Unicore Communications. The UM980 is a 1408-Channel GNSS Receiver based on the Nebulas IV™ that is able to simulta...
Delivered by Mon 17 Aug
Digi XBee® RR Pro Module - U.FL Antenna
SKU: SF-WRL-22629 | Brand: SparkFun
XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking....
Delivered by Mon 17 Aug
Digi XBee® RR Module - U.FL Antenna
SKU: SF-WRL-22628 | Brand: SparkFun
XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking....
Delivered by Mon 17 Aug
Digi XBee® RR Module - SMA Antenna
SKU: SF-WRL-22630 | Brand: SparkFun
XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking....
Delivered by Mon 17 Aug
Digi XBee® RR Pro Module - SMA Antenna
SKU: SF-WRL-22631 | Brand: SparkFun
XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking....
Delivered by Mon 17 Aug
SparkFun Mini Linear 3D Hall-Effect Sensor - TMAG5273 (Qwiic)
SKU: SF-SEN-23881 | Brand: SparkFun
The SparkFun TMAG5273 Qwiic Mini Linear 3D Hall-Effect Sensor is a low-power, high-precision magnetic field sensor that can detect a magnetic field's presence, strength, and direction in three dimensions. This board i...
Delivered by Mon 17 Aug
MyoWare 2.0 Power Shield
SKU: SF-DEV-21868 | Brand: SparkFun
The MyoWare® 2.0 Power Shield is designed to easily power the MyoWare 2.0 Muscle Sensor for remote applications. The MyoWare Power Shield is equipped with snap connectors on the board so you can easily stack it to the...
Delivered by Mon 17 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared