All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
UV Ultraviolet Ray Detection Sensor
SKU: LB-LS2299 | Brand: Little Bird
A UV detection sensor module that measures ultraviolet light intensity in the 200–370 nm wavelength range. The analogue output (0–1 V DC) is proportional to the UV Index, making it suitable for measuring UV exposure i...
Delivered by Mon 5 Oct
Adafruit Micro SD SPI or SDIO Card Breakout Board - 3V ONLY!
SKU: AF-4682 | Brand: Adafruit
The Adafruit Micro SD SPI or SDIO Card Breakout Board gives you fast microSD card access using either standard SPI or the higher-speed SDIO protocol. Unlike SPI-only breakouts, this board exposes the full SDIO bus wit...
Delivered by Tue 27 Oct
WiFi Module ESP8266 ESP-01
SKU: LB-LR0307 | Brand: Little Bird
Upgraded Version ESP-01,all Flash are upgraded to 1M byte.Also support Cloud service remote transmission.This Upgraded Version module are fully supports the previous firmware The latest firmware version 1.0.1, the ...
Delivered by Mon 5 Oct
VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor - GY-530
SKU: LB-LS6503 | Brand: Little Bird
The VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor is an advanced distance sensor module that provides highly accurate distance measurements using infrared laser technology. With a range of up to 2 meters, this com...
Delivered by Mon 5 Oct
Raspberry Pi GPIO Expansion Extension Board Screw Terminal Hat
SKU: LB-LS7233 | Brand: Little Bird
Upgrade your Raspberry Pi experience with our GPIO Expansion Extension Board Screw Terminal Hat! This beautifully designed screw terminal expansion version is the perfect addition to your electronic experiments. Conve...
Delivered by Mon 5 Oct
10DOF Module MPU6050 HMC5883L BMP180 GY87 Sensor Module
SKU: LB-LS5114 | Brand: Little Bird
The GY-87 is a 10 degrees-of-freedom (10DOF) sensor module that combines three chips on a single compact board: the MPU6050 (3-axis gyroscope + 3-axis accelerometer), HMC5883L (3-axis magnetometer), and BMP180 (barome...
Delivered by Mon 5 Oct
DC-DC 12V To 3.3V 5V Buck Step down Power Supply Module For Arduino
SKU: LB-LR0214-142A | Brand: Little Bird
One input: DC 6V - 12V (input voltage to the output voltage must be higher than 1V.) Output: 3.3V (+ - 0.05v error), 5.0V (+ - 0.05v error), 800mA (load current can not exceed 800ma), 12V (12V input directly conv...
Delivered by Mon 5 Oct
I2C 20x4(2004) LCD Display for Arduino
SKU: DF-DFR0154 | Brand: DFRobot
A 20×4 character I2C LCD display module compatible with Arduino and other microcontrollers. It shows white characters on a blue backlit background, and the I2C interface means you only need two data pins (SDA and SCL)...
Delivered by Mon 5 Oct
ThinkNode M2 Meshtastic (LoRa) Signal Transceiver Powered By ESP32-S3 With 1.3” OLED Display - (Without Battery)
SKU: EC-CIL13002M2 | Brand: Elecrow
Elecrow ThinkNode-M2 is a high-performance LoRa signal transceiver. It uses the ESP32-S3 module as the main processor and supports Bluetooth. Users can easily configure and monitor the device through their mobile pho...
Delivered by Mon 5 Oct
DC-DC Multi-output Buck Converter (3.3V/5V/9V/12V)
SKU: DF-DFR1015 | Brand: DFRobot
Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required.This DC-DC step-down voltage power module converts 7.5V~30V input to an output of 3.3V/5V/9...
Delivered by Mon 5 Oct
Sonar:bit for micro:bit Ultrasonic Sensor Distance Measuring 3V/5V
SKU: EF-EF04089 | Brand: ElecFreaks
Sonar:bit is a 3-wire ultrasonic distance sensor designed for micro:bit and Arduino projects. Operating on 3–5V, it works directly with both 3.3V and 5V systems using a single GVS cable — saving an I/O port compared t...
Delivered by Mon 5 Oct
Arduino Infra-red obstacle sensor
SKU: LB-LR0006 | Brand: Little Bird
The infrared obstacle sensor is a compact IR proximity module designed for robotics and automation projects. It detects obstacles within a 2–40 cm range and outputs a TTL-level signal, making it easy to integrate with...
Delivered by Mon 5 Oct
Capacitive Touch Sensor for Arduino
SKU: LB-LR0214-47 | Brand: Little Bird
This is a touch sensor for Arduino. This sensor is a toggle output type: touch-on then touch-off. Onboard TTP223 touch capacitive touch sensor IC. With an on-board-level status indicator. Wor...
Delivered by Mon 19 Oct
RS232 To TTL Converter Module MAX3232
SKU: EC-CIN3232RT | Brand: Elecrow
This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port....
Delivered by Mon 5 Oct
Gravity: Offline Language Learning Voice Recognition Sensor for Arduino / Raspberry Pi / Python / ESP32 - I2C & UART
SKU: DF-SEN0539-EN | Brand: DFRobot
What is voice recognition? Voice recognition is a computer technology that recognizes and converts speech signals into editable text or operational commands through analysis. It allows people to interact with...
Delivered by Wed 14 Oct
DC-DC Buck Boost Converter Module (5A)
SKU: DF-DFR0946 | Brand: DFRobot
This compact DC-DC converter module provides automatic buck-boost regulation, helping maintain a stable output voltage even when the input voltage is higher or lower than the desired output.It supports applications su...
Delivered by Wed 14 Oct
DHT22 Temperature and Humidity Sensor
SKU: DF-SEN0137 | Brand: DFRobot
DHT22 capacitive humidity sensing digital temperature and humidity module is one that contains the compound has been calibrated digital signal output of the temperature and humidity sensors. Application of a dedicate...
Delivered by Wed 14 Oct
Adafruit BME688 - Temperature, Humidity, Pressure and Gas Sensor
SKU: AF-5046 | Brand: Adafruit
The BME688 from Bosch delivers comprehensive environmental sensing in a single compact package. This precision sensor measures temperature, humidity, barometric pressure, and VOC gas levels, all accessible over I2C or...
Delivered by Mon 5 Oct
Lipo Charger-MicroUSB
SKU: DF-DFR0667 | Brand: DFRobot
This Charger - MicroUSB is designed for single-cell 3.7V lithium battery. With its tiny body, you can easily integrate it into your applications. The charger adopts TP4056X lithium battery charging IC, which guarantee...
Delivered by Wed 14 Oct
Stereo Bluetooth Amplifier Board
SKU: DF-DFR0675-EN | Brand: DFRobot
This is a small size and cost-effective Bluetooth 5.0 digital amplifier module with a volume adjustment function. It can connect to two speakers and match a wide variety of high-power speakers (40W-200W). This boar...
Delivered by Mon 5 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared