All Products

SKU: AF-4719 | Brand: Adafruit

The Adafruit SPI Non-Volatile FRAM Breakout provides 4 Mbit (512 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no p...

SKU: AF-4569 | Brand: Adafruit

The Adafruit ISM330DHCX + LIS3MDL FeatherWing combines two precision ST sensors to deliver 9 degrees of freedom — accelerometer, gyroscope, and magnetometer — in the Feather form factor. Stack it onto any Feather boar...

SKU: DF-SEN0327 | Brand: DFRobot

A compact digital MEMS microphone module based on the MSM261S4030H0 chip, providing 24-bit I2S digital audio output. The built-in I2S interface connects directly to DSPs and microcontrollers without requiring an exter...

SKU: MM-SKU00066 | Brand: Monk Makes

The 7-Segment for micro:bit by Monk Makes is a 4-digit 7-segment display designed specifically for BBC micro:bit. It can display numbers, letters, and limited characters using simple serial communication from a single...

SKU: SF-SEN-15440 | Brand: SparkFun

The BME280 Atmospheric Sensor Breakout measures barometric pressure, relative humidity, and temperature from a single compact board. With both Qwiic (I2C) and 0.1″ header connections, it integrates easily into Arduino...

SKU: EF-EF04024 | Brand: ElecFreaks

This is a Rain/steam sensor from ElecFreaks. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up.You even co...

SKU: DF-SEN0239 | Brand: DFRobot

A digital infrared proximity sensor with adjustable detection range from 0 to 200 cm. Outputs a simple digital signal — HIGH when an obstacle is detected, LOW when clear. The detection threshold is adjustable via a re...

SKU: AF-4172 | Brand: Adafruit

The Adafruit HUZZAH32 ESP32 Breakout is a compact, breadboard-friendly development board built around the Espressif ESP32 dual-core processor. With WiFi, Bluetooth Classic, and BLE support, 4 MB SPI Flash, and a gener...

SKU: AF-1231 | Brand: Adafruit

The ADXL345 from Analog Devices is a triple-axis digital accelerometer with both I2C and SPI interfaces. This breakout board includes an on-board 3.3V regulator and logic-level shifting, making it easy to interface wi...

SKU: PI-COM2800 | Brand: Pimoroni

Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client...

SKU: AF-3986 | Brand: Adafruit

This T-Slot Photo Interrupter is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR light acro...

SKU: LB-LR0214-73A | Brand: Little Bird

Secure your project with biometrics - this all-in-one optical fingerprint sensor will make adding fingerprint detection and verification super simple. These modules are typically used in safes - there's a high powered...

SKU: LB-LR0205 | Brand: Little Bird

An alcohol sensor module for Arduino with both digital (TTL) and analog output. It detects alcohol vapour in the 10–1000 PPM range, with analog output voltage increasing proportionally with concentration. The module a...

SKU: AF-1602 | Brand: Adafruit

Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has ...

SKU: AF-2340 | Brand: Adafruit

The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clip...

SKU: DF-DFR0106 | Brand: DFRobot

This fantastic light disc consists of 7 SMD RGB LED. It illustrates a beautiful color combination much better than traditional RGB led. You can control the LEDs via the RGB pins. By pulse-width-modulating the pins an...

SKU: AF-2809 | Brand: Adafruit

The Adafruit LIS3DH is a popular, low-power triple-axis accelerometer breakout packed with features typically found only on higher-end sensors. With selectable measurement ranges, multiple interface options, and built...

SKU: SF-BOB-13878 | Brand: SparkFun

The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard four-wire Wheatstone bridge configuration. If you open up an electronic bathroom scale, you’ll find a large rat’s ne...

SKU: DF-SEN0159 | Brand: DFRobot

The Gravity CO2 Gas Sensor uses an MG-811 electrochemical sensing element to detect carbon dioxide concentration in the air. The output voltage decreases as CO2 concentration increases, and an onboard potentiometer le...

SKU: SF-WRL-13231 | Brand: SparkFun

The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC — a popular platform for IoT and WiFi-connected projects. All module pins are broken out to breadboard-compatible rows, and on-bo...