All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
ESP32S Wifi Bluetooth Combo Module
SKU: EC-CCF32323S | Brand: Elecrow
The ESP32S is a WiFi and Bluetooth combo module built around the Espressif ESP32 dual-core processor. It supports 802.11 b/g/n WiFi with speeds up to 150 Mbps and Bluetooth v4.2 (both Classic and BLE), making it a ver...
Out of stock
SparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A)
SKU: SF-BOB-16784 | Brand: SparkFun
The SparkFun Qwiic Mux Breakout uses the TCA9548A to provide 8 independent I2C channels, solving the common problem of multiple sensors sharing the same address. Simply route each device to its own channel and communi...
Out of stock
SparkFun Micro 6DoF IMU Breakout - BMI270 (Qwiic)
SKU: SF-SEN-22398 | Brand: SparkFun
The SparkFun BMI270 Micro 6DoF IMU Breakout is a Qwiic-enabled breakout board based on the ultra-low power BMI270 from Bosch. This chip is a highly integrated, low-power IMU optimized for wearables providing precise a...
Out of stock
Tsunami Super WAV Trigger (Qwiic)
SKU: SF-WIG-18159 | Brand: SparkFun
The Tsunami Super WAV Trigger is a polyphonic audio player built around an ARM Cortex M7, capable of mixing up to 32 mono or 18 stereo simultaneous uncompressed 44.1 kHz, 16-bit WAV tracks. Each track can be independe...
Out of stock
NFC/RFID breakout Module
SKU: EF-EF03081 | Brand: ElecFreaks
The NFC/RFID breakout based on PN532, which is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and...
Out of stock
Octopus Real-time Clock
SKU: EF-EF04005 | Brand: ElecFreaks
Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino / Freaduino compatible boards easily with various...
Out of stock
25m Long Distance ToF Laser Sensor (±3cm Accuracy, 100Hz, 100K LUX Resistant)
SKU: DF-SEN0647 | Brand: DFRobot
The TOFSense F2 is a high-performance laser distance sensor using dTOF (Direct Time-of-Flight) technology. With 25m range, ±3cm accuracy, and 100Hz refresh rate, it's ideal for robotics, industrial automation, drones,...
Out of stock
Adafruit STHS34PF80 IR Presence / Motion Sensor
SKU: AF-6426 | Brand: Adafruit
The Adafruit STHS34PF80 is a compact IR presence and motion sensor that detects human and animal presence up to 4 metres away — without requiring a lens. Unlike traditional chunky PIR sensors with simple digital outpu...
Out of stock
Adafruit OPT4048 Tri-Stimulus XYZ Color and Lux Sensor
SKU: AF-6335 | Brand: Adafruit
A modern take on the common RGB colour sensor — the OPT4048 provides true CIE XYZ tri-stimulus output so you can match readings directly to standard colour spaces. It also calculates colour temperature (based on CIE) ...
Out of stock
Adafruit ADG728 1-to-8 Analog Matrix Switch
SKU: AF-5899 | Brand: Adafruit
The Adafruit ADG728 is a solid-state 1-to-8 analog matrix switch controlled over I2C. Unlike relays, analog switches have no moving parts, won't wear out, and switch in approximately 100 ns. Use it to route up to 8 an...
Out of stock
SparkFun Qwiic Buzzer
SKU: SF-BOB-24474 | Brand: SparkFun
The SparkFun Qwiic Buzzer adds simple beeps and buzzes to your projects via I2C. Make some noises to alert you when something interesting (or urgent) happens. Simply connect a Qwiic cable and load up some pre-written ...
Out of stock
SparkFun GPS-RTK Dead Reckoning Breakout - ZED-F9R, SMA (Qwiic)
SKU: SF-GPS-22660 | Brand: SparkFun
The SparkFun Dead Reckoning Breakout SMA - ZED-F9R is a high precision, sensor fusion GPS board with equally impressive configuration options and takes advantage of u-blox's Automotive Dead Reckoning (ADR) technology....
Out of stock
SparkFun GNSS Combo Breakout - ZED-F9P, NEO-D9S (Qwiic)
SKU: SF-GPS-22560 | Brand: SparkFun
With GNSS, you can know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy, the better! Our versatile global positioning combo breakout pair...
Out of stock
SparkFun GPS Breakout - Chip Antenna, SAM-M10Q (Qwiic)
SKU: SF-GPS-21834 | Brand: SparkFun
The SparkFun SAM-M10Q GPS Breakout features the SAM-M10Q chip-antenna module from u-blox©. The M10Q line is the successor to u-blox's M8Q found on the SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic), and is a dr...
Out of stock
SparkFun Micro Temperature Sensor - STTS22H (Qwiic)
SKU: SF-SEN-21273 | Brand: SparkFun
The SparkFun STTS22H Micro Temperature Sensor is a Qwiic-enabled breakout board based on the ultralow-power, high-accuracy, digital temperature sensor STTS22H from ST Microelectronics and housed in our Qwiic Micro for...
Out of stock
ESP32-C6-WROOM-1-N8 Engineering Module - 8 MB Quad SPI Flash
SKU: AF-5671 | Brand: Adafruit
ESP32-C6-WROOM-1-N8 is an ESP32-C6-based module, which supports WiFi 6 in a 2.4GHz band, Bluetooth 5, Zigbee 3.0, and Thread. It's pin-to-pin compatible with the ESP32-WROOM series module. With low-power consumption,...
Out of stock
SparkFun GNSS Receiver Breakout - MAX-M10S (Qwiic)
SKU: SF-GPS-18037 | Brand: SparkFun
The SparkFun MAX-M10S Breakout is an ultra-low-power, high performance, miniaturized GNSS board that is perfect for battery operated applications that don't possess a lot of space, such as asset trackers and wearable ...
Out of stock
Embedded Serial to Ethernet Module
SKU: DF-DFR0963 | Brand: DFRobot
This is an embedded serial-to-Ethernet module based on the ESP32 series, also can be called a gateway. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the net...
Out of stock
Adafruit LED Glasses Driver - nRF52840 Sensor Board
SKU: AF-5217 | Brand: Adafruit
The Adafruit LED Glasses Driver is a slim, Bluetooth-enabled controller board built around the Nordic nRF52840 chipset. Originally designed to drive the Adafruit LED Glasses RGB LED matrix, it also works brilliantly a...
Out of stock
Adafruit LED Glasses Front Panel - 116 RGB LEDs with I2C Driver
SKU: AF-5210 | Brand: Adafruit
The Adafruit LED Glasses Front Panel features 116 artfully arranged 2×2 mm RGB LEDs controlled by an IS31FL3741 I2C driver chip. Simply connect it via STEMMA QT to your favourite microcontroller and start creating daz...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
