All Products

SKU: DF-DFR0743-WROOM | Brand: DFRobot

ESP32-S2- WROOM is a generic WiFi MCU module featuring rich peripherals and high performance. The module has 42 pins and 4MB flash, which can perform stable performance in industrial scenes.At the core of th...

SKU: SF-WRL-17746 | Brand: SparkFun

ESP32-WROOM-32 is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming...

SKU: SF-WRL-16781 | Brand: SparkFun

The SparkFun MicroMod ESP32 Processor Board brings Espressif's ESP32 into the MicroMod ecosystem via the M.2 connector interface. It provides WiFi and Bluetooth connectivity with the processing power of a dual-core Te...

SKU: AF-4653 | Brand: Adafruit

The ESP32-S2-WROVER is a Wi-Fi module from Espressif built around the ESP32-S2 SoC — a single-core 240 MHz Xtensa LX7 processor with native USB support, 4 MB flash, and 2 MB PSRAM. It provides 2.4 GHz 802.11b/g/n Wi-F...

SKU: DF-DFR0623 | Brand: DFRobot

ESP32-WROVER-B is a highly-integrated generic WiFi-BT-BLE-MCU module with steady performance and low power consumption. It features an IPEX antenna, a 4MB external SPI flash and 64-Mbit SPI PSRAM that operates at 3...

SKU: EF-EF04006 | Brand: ElecFreaks

The Octopus Mercury Sensor is a tilt and angle detection module based on the mercury switch principle. When tilted, the mercury inside the switch makes or breaks contact, providing a simple way to detect orientation c...

SKU: DF-SEN0275 | Brand: DFRobot

The MB1040 LV-MaxSonar-EZ4 is a compact ultrasonic range sensor from MaxBotix that provides distance measurements from 15 cm to 645 cm (6" to 254") with 2.5 cm (1") resolution. It features the narrowest beam width of ...

SKU: AF-1362 | Brand: Adafruit

This breakout board is the simplest way to create a project with mutiple capacitive touch sensors. No microcontroller is required here - just power with 1.8 to 5.5VDC and connect up to 5 conductive pads to the 5 left-...

SKU: SF-COM-08236 | Brand: SparkFun

This is a fully assembled simple breakout board for the surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using up and down sel...

SKU: SF-BOB-11040 | Brand: SparkFun

The SparkFun LED RingCoder Breakout provides a visual position indicator for rotary encoders. Two 8-bit shift registers drive a circular LED bargraph that displays the virtual position of the encoder as it turns, givi...

SKU: SF-BOB-09322 | Brand: SparkFun

A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate, photodiode, or phototransistor). This PCB has three connections for PWR, GND, and Signal.When the gate is clear, SIG will be high (>...

SKU: SF-BOB-12052 | Brand: SparkFun

Odometers are extremely useful for cars, they tell you how far you have gone, wouldn’t it be nice if you were able to have a device that does the same for electrical current? The LTC4150 SparkFun Coulomb Counter Break...

SKU: SF-BOB-11722 | Brand: SparkFun

This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB pins to standard, breadboard friendly, 0.1" headers. Turn it over and it has a foo...

SKU: DF-SEN0001 | Brand: DFRobot

URM37 V4.0 Arduino Ultrasonic Sensor comes with temperature compensation which provides better distance measurement accuracy. It is very unique feature in the industry. URM37 V4.0 Arduino Ultrasonic Sensor offers ...

SKU: AF-3320 | Brand: Adafruit

The ESP-WROOM-32 is Espressif's flagship WiFi + Bluetooth Classic + BLE module, built around the dual-core Tensilica LX6 microprocessor. It targets a wide variety of applications from low-power sensor networks to dema...

SKU: EC-CDD8266STW | Brand: Elecrow

A breadboard adapter for the popular ESP-01 model of the ESP8266 serial-to-Wi-Fi transceiver module. It converts the ESP-01's 2×4 pin header into two breadboard-friendly single-row headers with clearly labelled pin na...

SKU: AF-1374 | Brand: Adafruit

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...

SKU: AF-5671 | Brand: Adafruit

ESP32-C6-WROOM-1-N8 is an ESP32-C6-based module, which supports WiFi 6 in a 2.4GHz band, Bluetooth 5, Zigbee 3.0, and Thread. It's pin-to-pin compatible with the ESP32-WROOM series module. With low-power consumption,...

SKU: DF-DFR0963 | Brand: DFRobot

This is an embedded serial-to-Ethernet module based on the ESP32 series, also can be called a gateway. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the net...

SKU: AF-4919 | Brand: Adafruit

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth...