All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Battery Holder 2xAA with Cover and Switch
SKU: SF-PRT-09547 | Brand: SparkFun
A 2×AA battery holder with a sliding cover secured by a Phillips head screw and a built-in ON/OFF switch for convenient power control. The 150mm tinned leads make it easy to solder into your projects. Key Features ...
Delivered by Fri 12 Jun
4xAA battery holder (square with cover)
SKU: DF-FIT0080 | Brand: DFRobot
A 4-cell AA battery holder in a square (2×2) configuration with a sliding removable cover and a built-in ON/OFF switch. Features 5-inch tinned leads for easy soldering. The cover keeps batteries secure, and the switch...
Delivered by Fri 12 Jun
2AA Battery Holder with Cover and Switch and Large size Alligator
SKU: LB-LS5508 | Brand: Little Bird
A 2×AA battery holder with a protective cover, built-in on/off switch, and large alligator clip leads. The alligator clips make it easy to connect to circuits, components, and conductive materials without soldering — ...
Delivered by Fri 12 Jun
4 x AA Battery Holder with On/Off Switch
SKU: AF-830 | Brand: Adafruit
A 4×AA battery holder with a snap-on cover and built-in on/off switch. Holds four AA batteries in series, outputting a nominal 6V (alkaline) or 4.8V (NiMH), making it a convenient portable power source for 5V microcon...
Delivered by Fri 12 Jun
4 x AA Battery Holder with Premium Jumper Header Wires
SKU: AF-3859 | Brand: Adafruit
A 4×AA battery holder with premium jumper header wires that plug directly into a breadboard. No stripping or soldering required — just insert the header pins into your breadboard rails and start prototyping with porta...
Delivered by Fri 12 Jun
8 x AA battery holder
SKU: AF-449 | Brand: Adafruit
This 8×AA battery holder provides a portable 12V power source by connecting 8 AA batteries end-to-end in series. It delivers approximately 12VDC with alkaline cells (9.6V with NiMH rechargeables) and supports up to 2A...
Delivered by Fri 12 Jun
2xAA Battery Holder With ON/OFF Switch and Cover for Micro:bit Board
SKU: EF-EF10095 | Brand: ElecFreaks
A 2×AA battery holder designed specifically for the BBC micro:bit. The built-in JST PH connector plugs directly into the micro:bit's battery socket, and the integrated on/off switch with a secure cover provides safe, ...
Delivered by Fri 12 Jun
Battery Holder 4xAA with Cover and Switch
SKU: SF-PRT-12083 | Brand: SparkFun
This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF swi...
Delivered by Fri 12 Jun
3xAA Battery Holder
SKU: DF-FIT0610 | Brand: DFRobot
This enclosed battery holder takes 3× AA batteries in series, providing approximately 4.5V from alkaline cells or 3.6V from NiMH/NiCd rechargeables. It features a built-in on/off switch and a sliding, removable cover ...
Delivered by Fri 12 Jun
2 x AA Battery Holder with On/Off Switch JST PH Connector
SKU: AF-4193 | Brand: Adafruit
A slim 2×AA battery holder with a built-in on/off switch and genuine JST PH connector. Two AA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, microcontrollers, and p...
Delivered by Fri 12 Jun
3x AA Battery Holder with On/Off Switch and 2-Pin JST
SKU: AF-4779 | Brand: Adafruit
This compact battery holder connects 3× AA batteries in series, providing 3.3–4.5V output — a similar range to lithium-ion/polymer batteries. It features a built-in on/off switch and a genuine JST-PH 2-pin connector w...
Delivered by Thu 2 Jul
4xAA battery holder (square)
SKU: DF-FIT0079 | Brand: DFRobot
A simple 4-cell AA battery holder in a square (2×2) configuration. Features 5-inch tinned leads for easy soldering into your project. Provides 6V nominal output with four AA alkaline batteries, or 4.8V with rechargeab...
Delivered by Fri 12 Jun
Battery Holder - 4xAA Square
SKU: SF-PRT-00552 | Brand: SparkFun
Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration.
Delivered by Tue 23 Jun
Battery Holder 3xAA with Cover and Switch
SKU: SF-PRT-10891 | Brand: SparkFun
This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF swi...
Delivered by Fri 12 Jun
8 x AA battery holder with 5.5mm/2.1mm Plug and On/Off Switch
SKU: AF-875 | Brand: Adafruit
This 8×AA battery holder provides a portable power source with a built-in on/off switch and a standard 5.5 mm / 2.1 mm DC barrel plug for easy connection to Arduino boards, LED strips, motors, and other 12V devices. U...
Delivered by Fri 12 Jun
MicroUSB Battery Holder (3xAA)
SKU: DF-FIT0362 | Brand: DFRobot
This battery holder can hold 3 AA batteries which provides 3.6V rechargeable battery pack with NiMH / NiCd cells or 4.5V battery pack with Alkaline cells. You will be able to power your Arduino with this battery hold...
Delivered by Fri 12 Jun
4x AA Battery Holder (with Power Switch, DC2.1 Jack, and Cover)
SKU: DF-FIT0918 | Brand: DFRobot
A compact 4×AA battery holder with a built-in on/off power switch, DC2.1 barrel jack output, and a protective cover. Ideal for powering Arduino, Raspberry Pi, and other microcontroller projects with a portable 6V supp...
Delivered by Fri 12 Jun
Battery Holder 3xAA with Cover and Switch - JST Connector
SKU: SF-PRT-18769 | Brand: SparkFun
This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover as well as an ON/OFF switch that can be used to control power to your project. The ...
Delivered by Fri 12 Jun
2 x AA Open Battery Holder with JST PH Connector
SKU: AF-4194 | Brand: Adafruit
A slim, open-top 2×AA battery holder with a genuine JST PH connector. Two AA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, Adafruit boards, and microcontrollers wi...
Delivered by Thu 2 Jul
4 x AA Battery Holder with 2.1mm Plug
SKU: AF-3784 | Brand: Adafruit
A 4×AA battery holder with a 20cm (8″) power cable terminating in a centre-positive 2.1mm DC barrel jack. Provides a portable power source for development boards and projects that accept a standard DC barrel jack inpu...
Delivered by Thu 2 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
