All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
4 x AA Battery Holder with 2.1mm Plug
SKU: AF-3784 | Brand: Adafruit
A 4×AA battery holder with a 20cm (8″) power cable terminating in a centre-positive 2.1mm DC barrel jack. Provides a portable power source for development boards and projects that accept a standard DC barrel jack inpu...
Delivered by Tue 27 Oct
2x2 AA Battery Holder with Premium Jumper Header Wires
SKU: AF-3905 | Brand: Adafruit
This compact 2×2 AA battery holder connects four AA batteries in series, providing a nominal 6 V DC output (alkaline) or 4.8 V DC (rechargeable NiMH). The premium jumper header wires plug directly into a breadboard — ...
Delivered by Tue 27 Oct
2 x AA Battery Holder with Premium Jumper Header Wires
SKU: AF-3858 | Brand: Adafruit
A 2×AA battery holder with premium jumper header wires that plug directly into a breadboard — no stripping, twisting, or fighting with thin leads. Two AA batteries in series provide approximately 2.5V to 3V, making th...
Delivered by Tue 27 Oct
6xAA Battery Holder with DC2.1 Power Jack
SKU: DF-FIT0141 | Brand: DFRobot
A 6×AA battery holder with a DC 2.1mm power jack that plugs directly into an Arduino's barrel jack input. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Features mounti...
Delivered by Mon 5 Oct
micro:bit Battery Holder - 2xAA (JST-PH)
SKU: SF-PRT-14299 | Brand: SparkFun
This is a unique two-cell AA battery holder built specifically for the BBC micro:bit. The 6" (~150mm) cable has been terminated with a JST-PH connector. The connector mates the JST socket on the micro:bit perfectly...
Delivered by Mon 5 Oct
Battery Holder 2xAA with Cover and Switch - JST Connector
SKU: SF-PRT-09925 | Brand: SparkFun
This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small Phillips head screw. Another bonus is the ON/OFF ...
Delivered by Wed 14 Oct
Battery Holder - 4xAA to Barrel Jack Connector
SKU: SF-PRT-09835 | Brand: SparkFun
This is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector. The connector mates with the barrel jack on the Arduino (among a numbe...
Delivered by Mon 5 Oct
3 x AA Battery Holder with 2.1mm Plug
SKU: AF-3842 | Brand: Adafruit
A compact battery holder for three AA cells with an integrated power cable and DC barrel jack. The series configuration delivers approximately 3.6–4.5V depending on battery chemistry, making it a convenient power sour...
Delivered by Tue 27 Oct
2 x AA Battery Holder with Knife Switch
SKU: AF-3951 | Brand: Adafruit
A 2×AA battery holder with a built-in knife switch for controlling power. Unlike typical slide switches, the knife switch provides a clear visual indicator of open and closed circuit states — making it an excellent to...
Delivered by Tue 27 Oct
1 X AA Battery Holder
SKU: TB-PH9203 | Brand: Little Bird
This holder provides a simple way to add one AA cell to a battery-powered project. It is moulded in Delrin and uses corrosion-resistant nickel-plated springs and studs for reliable contact.The 150 mm bare lead connect...
Delivered by Mon 5 Oct
6 x AA battery holder with 5.5mm/2.1mm plug
SKU: AF-248 | Brand: Adafruit
A 6×AA battery holder with a 5.5mm/2.1mm DC barrel plug, ready to power Arduino boards and other electronics with a standard DC jack. Use alkaline AAs for approximately 9V at 3000–4000mAh, or rechargeable NiMH cells f...
Delivered by Mon 5 Oct
3 x AA Battery Holder with On/Off Switch, JST, and Belt Clip
SKU: AF-3287 | Brand: Adafruit
A compact 3×AA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making...
Delivered by Tue 27 Oct
Waterproof 2xAA Battery Holder with On/Off Switch
SKU: AF-770 | Brand: Adafruit
Keep your power source safe and toasty in these waterproof 2xAA battery holders. They're just like classic switched battery holders, but designed for survival! The case has a rubber gasket around the edge of the ca...
Delivered by Tue 27 Oct
Micro:bit Board with Battery Holder kit
SKU: EF-EF08182 | Brand: ElecFreaks
This kit contains a micro:bit board, a USB cable and a battery holder. This is a basic kit for using micro:bit. Micro:bit board is launched by BBC which aims to help children at or above 7 grade to learn programming b...
Delivered by Mon 19 Oct
3×AA Battery Holder(PH2.0-2P)
SKU: DF-FIT0619 | Brand: DFRobot
This battery holder connects 3× AA batteries in series, providing approximately 4.5V from alkaline cells. It features a PH2.0-2P connector with a 15cm wire lead, making it compatible with DFRobot boards and other devi...
Delivered by Wed 14 Oct
4 x AA Battery Holder with 2.1mm Plug and On/Off Switch
SKU: AF-3788 | Brand: Adafruit
A 4×AA battery holder with a built-in on/off switch and a 13cm (5″) power cable terminating in a centre-positive 2.1mm DC barrel jack. Provides convenient portable power with easy switching for development boards and ...
Delivered by Tue 27 Oct
Battery Holder - 1xAA (PTH)
SKU: SF-PRT-07949 | Brand: SparkFun
A PCB-mount clip designed to hold a single AA battery. Ideal for small, low-power applications that need a compact battery solution. Sold individually — use two clips for a complete AA battery holder. Key Features ...
Delivered by Wed 14 Oct
Alkaline AA batteries (LR6) - 4 pack
SKU: AF-3349 | Brand: Adafruit
A 4-pack of standard alkaline AA batteries for powering portable electronics, kits, and projects. These use alkaline (MnO2) chemistry with a voltage range of 1.6V (fresh) to 0.8V (depleted) and a typical capacity of a...
Delivered by Tue 27 Oct
Waterproof 3xAA Battery Holder with On/Off Switch
SKU: AF-771 | Brand: Adafruit
Keep your power source safe and toasty in these waterproof 3xAA battery holders. They're just like classic switched battery holders, but designed for survival! The case has a rubber gasket around the edge of the ca...
Delivered by Tue 27 Oct
6xAA Battery Holder(double layer)
SKU: DF-FIT0078 | Brand: DFRobot
A double-layer 6×AA battery holder with a stacked 3+3 cell arrangement for a more compact footprint. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Comes with 150mm (6"...
Delivered by Mon 5 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
