All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
SparkFun GPS Breakout - ZOE-M8Q (Qwiic)
SKU: SF-GPS-15193 | Brand: SparkFun
The SparkFun ZOE-M8Q GPS Breakout is a miniaturised, high-accuracy GNSS receiver board with Qwiic (I2C) connectivity. The u-blox ZOE-M8Q is a 72-channel receiver that tracks GPS, GLONASS, BeiDou, and Galileo constella...
Delivered by Fri 14 Aug
SparkFun Triple Axis Magnetometer Breakout - MLX90393 (Qwiic)
SKU: SF-SEN-14571 | Brand: SparkFun
It’s time to start utilizing the superior magnetometer, and what better way than to throw it onto an easy-to-use breakout board? The SparkFun MLX90393 Magnetometer Breakout is a triple-axis magnetic sensor bo...
Delivered by Fri 14 Aug
RPLIDAR A3 - 360 Degree Laser Scanner Development Kit
SKU: DF-DFR0583 | Brand: DFRobot
FEATURES APPLICATIONS Obstacle Avoidance Autonomous Mapping Route Planning Navigation SPECIFICATION Model: RPLDIAR-A3 Distance Range: 0.15 - 25 m Angula...
Delivered by Fri 14 Aug
SparkFun IR Array Breakout - 110 Degree FOV, MLX90640 (Qwiic)
SKU: SF-SEN-14843 | Brand: SparkFun
It’s time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating, in essence, a low resolution thermal imaging camera. With thi...
Delivered by Fri 14 Aug
SparkFun GPS Breakout - XA1110 (Qwiic)
SKU: SF-GPS-14414 | Brand: SparkFun
The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chips...
Delivered by Wed 5 Aug
ADT7410 High Accuracy I2C Temperature Sensor Breakout Board
SKU: AF-4089 | Brand: Adafruit
Get precise temperature readings with the ADT7410 High Accuracy I2C Temperature Sensor from Analog Devices. Featuring 16-bit resolution (0.0078°C) and ±0.5°C accuracy, this breakout delivers reliable measurements over...
Delivered by Thu 27 Aug
SparkFun GPS-RTK2 Board - ZED-F9P (Qwiic)
SKU: SF-GPS-15136 | Brand: SparkFun
With GPS you are able to know where you are, where you’re going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dia...
Delivered by Fri 14 Aug
AM2320 Digital Temperature and Humidity Sensor
SKU: AF-3721 | Brand: Adafruit
The AM2320 is a low-cost digital temperature and humidity sensor with an I2C interface — a simpler alternative to the classic DHT11/DHT22 sensors that require timing-critical bit-bang protocols. With standard I2C comm...
Delivered by Thu 27 Aug
SparkFun Human Presence Sensor Breakout - AK9753 (Qwiic)
SKU: SF-SEN-14349 | Brand: SparkFun
This is not your normal Passive Infrared (PIR) sensor! The SparkFun AK9753 Human Presence Sensor Breakout is a Qwiic-enabled, 4-channel Nondispersive Infrared (NDIR) sensor. Each channel has a different field of view...
Delivered by Fri 14 Aug
Thermocouple Amplifier with 1-Wire Breakout Board - MAX31850K
SKU: AF-1727 | Brand: Adafruit
The MAX31850K breakout board is a 1-Wire thermocouple amplifier with cold-junction compensation for K-type thermocouples. Unlike SPI-based amplifiers, the 1-Wire interface allows any number of thermocouple breakouts t...
Delivered by Thu 27 Aug
Anemometer Wind Speed Sensor w/Analog Voltage Output
SKU: AF-1733 | Brand: Adafruit
A rugged anemometer designed for outdoor wind speed measurement with a simple analog voltage output. Connect it to any microcontroller's analog input for easy wind speed readings — no complex protocols or libraries re...
Delivered by Thu 27 Aug
L3GD20H Triple-Axis Gyro Breakout Board - L3GD20/L3G4200 Upgrade [L3GD20H]
SKU: AF-1032 | Brand: Adafruit
A gyroscope is a type of sensor that can sense twisting and turning motions. Often paired with an accelerometer, you can use these to do 3D motion capture and inertial measurement (that is - you can tell how an object...
Delivered by Thu 27 Aug
SRF05 ultrasonic sensor
SKU: DF-SEN0006 | Brand: DFRobot
The latest model SRF05 Detection range of 3 cm from the original SRF04 -3 m, increased to 1 cm -4 meters. RF04 is compatible with the original. Also has smaller side lobes. Ultrasonic module can be used to identi...
Delivered by Fri 14 Aug
SRF02 ultrasonic sensor
SKU: DF-SEN0005 | Brand: DFRobot
This low cost SFR02 ultrasonic ranger has both I2C and Serial interfaces. New AutoTune algorithms intelligently back the minimum range right up to the transducer ringdown for the very best performance possible, aut...
Delivered by Fri 14 Aug
3-Axis MEMS Accelerometer - MMA8452Q
SKU: SF-COM-10953 | Brand: SparkFun
The MMA8452Q is a low-power, 3-axis capacitive MEMS accelerometer with 12-bit resolution. Packed with embedded motion-detection functions and configurable interrupt outputs, it can monitor events autonomously while st...
Delivered by Fri 14 Aug
Adafruit Si7021 Temperature Humidity Sensor Breakout Board
SKU: AF-3251 | Brand: Adafruit
The Adafruit Si7021 is a temperature and humidity sensor from Silicon Labs with a PTFE filter for protection against dust and contaminants. It provides ±3% relative humidity accuracy over 0–80% RH and ±0.4 °C temperat...
Delivered by Thu 27 Aug
URM37 Ultrasonic Sensor for Arduino / Raspberry Pi
SKU: DF-SEN0001 | Brand: DFRobot
URM37 V4.0 Arduino Ultrasonic Sensor comes with temperature compensation which provides better distance measurement accuracy. It is very unique feature in the industry. URM37 V4.0 Arduino Ultrasonic Sensor offers ...
Delivered by Wed 5 Aug
Weather Station Kit with Anemometer/Wind Vane/Rain Bucket
SKU: DF-SEN0186 | Brand: DFRobot
INTRODUCTION Ever want to build your own weather station? This iot weather station kit includess anemometer, wind vane and rain bucket. The serial communication method provides good compatibility and ma...
Delivered by Wed 5 Aug
SparkFun Pressure Sensor Breakout - MS5803-14BA
SKU: SF-SEN-12909 | Brand: SparkFun
This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface. This MEMS pressure sensor measures the absolute pressure of the fluid around it which includes ai...
Delivered by Fri 14 Aug
Pimoroni Rainbow HAT for Android Things™ and Raspberry Pi
SKU: AF-3354 | Brand: Adafruit
The Rainbow HAT from Pimoroni has a buffet of sensors, inputs, and displays to explore Android Things™. Use it as a weather station, a clock, a timer or stopwatch, a mood light, or endless other things.Pimoroni collab...
Delivered by Wed 5 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
