All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
SparkFun Qwiic ToF Imager - VL53L5CX
SKU: SF-SEN-18642 | Brand: SparkFun
The SparkFun Qwiic ToF Imager is a state of the art, 64 pixel Time-of-Flight (ToF) 4 meter ranging sensor built around the VL53L5CX from ST. This chip integrates a SPAD array, physical infrared filters, and diffractiv...
Delivered by Wed 14 Oct
Gravity: Digital 360° Tilt Sensor for Arduino
SKU: DF-DFR0830 | Brand: DFRobot
This sensor contains a metal ball that moves along its special internal structure on the effect of gravitation force so as to make a connection or disconnection. Therefore, it can be used as a simple tilt switch. With...
Delivered by Wed 14 Oct
SparkFun MicroMod nRF52840 Processor
SKU: SF-WRL-16984 | Brand: SparkFun
Featuring the nRF52840 SoC from Nordic Semiconductor, the SparkFun MicroMod nRF52840 Processor offers a powerful combination of ARM Cortex-M4 CPU and 2.4 GHz Bluetooth transceiver in the MicroMod form-factor with the ...
Delivered by Wed 14 Oct
Serial 6-Axis Accelerometer for Arduino
SKU: DF-SEN0386 | Brand: DFRobot
A high-precision serial 6-axis accelerometer and gyroscope module with a built-in microprocessor, Kalman filter algorithm, and attitude solver. Outputs real-time roll, pitch, and yaw angles with a static accuracy of 0...
Delivered by Wed 14 Oct
URM13 Ultrasonic Sensor
SKU: DF-SEN0352 | Brand: DFRobot
The DFRobot URM13 is a compact ultrasonic ranging sensor with an open single-probe design. It supports three communication methods — TRIG pulse (SR04-compatible), UART, and I2C — making it versatile for a wide range o...
Delivered by Wed 14 Oct
SparkFun GPS Breakout - NEO-M9N, SMA (Qwiic)
SKU: SF-GPS-17285 | Brand: SparkFun
The SparkFun NEO-M9N GPS Breakout is a high quality GPS board with equally impressive configuration options including SMA. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive sign...
Delivered by Wed 14 Oct
SparkFun Triple Axis Digital Accelerometer Breakout - ADXL313 (Qwiic)
SKU: SF-SEN-17241 | Brand: SparkFun
The SparkFun ADXL313 Breakout is a low power, high resolution (up to 13-bits) 3-axis accelerometer for measurement up to ±4g. This breakout measures the static acceleration of gravity in tilt-sensing applications, as ...
Delivered by Wed 14 Oct
ESP8266 ESP-01/ESP-01S Relay WiFi Smart Control Module for Arduino
SKU: EC-ESP11002R | Brand: Elecrow
A WiFi-controlled relay module designed for ESP-01 or ESP-01S modules (based on the ESP8266). The relay is controlled via GPIO0 with a low-level trigger, allowing you to switch mains-powered devices on and off wireles...
Delivered by Mon 5 Oct
TOF Sense Laser Range Sensor (5m)
SKU: DF-SEN0337 | Brand: DFRobot
TOF Sense is a TOF-based (Time of Flight) laser ranging sensor that offers 1cm-5m detection range, 1mm resolution, ± 1.5cm error, and 10Hz data update frequency. The sensor supports 15 ° ~ 27 ° adjustable FOV, UART an...
Delivered by Wed 14 Oct
Infrared Photoelectric Switch
SKU: DF-SEN0347 | Brand: DFRobot
This infrared photoelectric switch consists of a transmitter and receiver pair that detects objects at distances up to 1.5 m with a response time under 1 ms. The infrared beam provides stable detection regardless of a...
Delivered by Wed 14 Oct
Octopus LM35 Analog Temperature Brick
SKU: EF-EF04070 | Brand: ElecFreaks
The Octopus LM35 Analog Temperature Brick is a plug-and-play temperature sensor module based on the TI LM35D precision centigrade temperature sensor. The LM35 outputs a voltage linearly proportional to temperature (10...
Delivered by Mon 19 Oct
Crowduino Uno-SD V1.5
SKU: EC-MCA02328UNO | Brand: Elecrow
The Crowduino Uno-SD mainboard is a microcontroller board that completely compatible with the Arduino UNO. It is based on the Atmega328P, which is widely also used in the Arduino Uno and other Arduino compatible board...
Delivered by Fri 23 Oct
NFC Shield
SKU: EC-ACS53201S | Brand: Elecrow
NFC(Near Field Communication) is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity , it builds upon...
Delivered by Fri 23 Oct
Crowduino M0- SD
SKU: EC-ACM36620M | Brand: Elecrow
A simple, yet powerful, 32-bit extension of the Arduino UNO platform. And we design this Crowduino- M0-SD board for you. This board also powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0 core. The po...
Delivered by Fri 23 Oct
Adafruit TMP235 - Plug-and-Play STEMMA Analog Temperature Sensor - TMP235
SKU: AF-4686 | Brand: Adafruit
The Adafruit TMP235 is a plug-and-play analog temperature sensor with a 3-pin JST PH (STEMMA) connector. Unlike I2C sensors, this one outputs a simple analog voltage proportional to temperature — just connect it to an...
Delivered by Tue 27 Oct
Adafruit H3LIS331 Ultra High Range Triple-Axis Accelerometer - STEMMA QT / Qwiic
SKU: AF-4627 | Brand: Adafruit
The Adafruit H3LIS331 is an ultra-high-range triple-axis accelerometer capable of measuring up to ±400g across all three axes. Part of the ST LIS331 family, it's designed for applications where standard ±16g accelerom...
Delivered by Mon 5 Oct
Adafruit LIS331 Triple-Axis Wide-Range ±24g Accelerometer - STEMMA QT / Qwiic
SKU: AF-4626 | Brand: Adafruit
The Adafruit LIS331 Accelerometer Breakout features the LIS331HH from ST — a triple-axis accelerometer capable of measuring up to ±24g, well beyond the ±16g limit of most standard accelerometers. It's ideal for high-i...
Delivered by Tue 27 Oct
Adafruit 9-DOF LSM9DS1 Breakout Board - STEMMA QT / Qwiic
SKU: AF-4634 | Brand: Adafruit
Add motion, direction and orientation sensing to your project with this compact STEMMA QT version of the LSM9DS1 9-DOF sensor from Adafruit. The LSM9DS1 combines a 3-axis accelerometer, 3-axis magnetometer and 3-axis ...
Delivered by Tue 27 Oct
Strain Gauge Load Cell - 4 Wires - 10Kg
SKU: AF-4542 | Brand: Adafruit
A 10 kg strain gauge load cell for measuring force, weight, and tension. The strain gauge is epoxy-bonded to a robust aluminium bar that protects the delicate foil element and constrains deflection to a safe range. As...
Delivered by Tue 27 Oct
SparkFun Qwiic Thermocouple Amplifier - MCP9600 (PCC Connector)
SKU: SF-SEN-16294 | Brand: SparkFun
The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...
Delivered by Wed 14 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
