All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Analog UV Light Sensor Breakout - GUVA-S12SD
SKU: AF-1918 | Brand: Adafruit
An analog UV light sensor breakout based on the GUVA-S12SD photodiode, detecting the 240–370nm range covering UVB and most of the UVA spectrum. An on-board op-amp amplifies the tiny photodiode current to a readable vo...
Delivered by Mon 23 Nov
LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator
SKU: PL-2126 | Brand: Pololu
A breakout board for ST's LPS331AP digital barometric pressure sensor. This sensor measures absolute pressure from 260 to 1260 mbar with excellent accuracy (±2 mbar), making it ideal for altitude estimation, weather m...
Delivered by Mon 23 Nov
Diffused LED - Green 10mm x 100
SKU: LB-LR0280-100-G | Brand: Little Bird
A bulk pack of 100 green 10mm through-hole LEDs with a diffused lens. The opaque epoxy package produces a soft, even glow rather than a harsh point of light. Key Features Diffused Lens – Soft, even glow with wide l...
Delivered by Mon 23 Nov
Diffused LED - Blue 10mm x 100
SKU: LB-LR0280-100-B | Brand: Little Bird
A bulk pack of 100 blue 10mm through-hole LEDs with a diffused lens. The opaque epoxy package produces a soft, even glow rather than a harsh point of light. Key Features Diffused Lens – Soft, even glow with wide li...
Delivered by Mon 23 Nov
Diffused LED - Red 10mm x 100
SKU: LB-LR0280-100 | Brand: Little Bird
A bulk pack of 100 red 10mm through-hole LEDs with a diffused lens. The opaque epoxy package produces a soft, even glow rather than a harsh point of light. Key Features Diffused Lens – Soft, even glow with wide lig...
Delivered by Mon 23 Nov
Keyestudio Foxbit STEM Education ESP32 Development Board Wireless Communication With TYPE-C For Arduino and Python
SKU: KS-FB0001 | Brand: Keyestudio
The FoxBit is a versatile development board built around the powerful ESP32-D0WDQ6 dual-core microcontroller, designed for education, makers, and electronics enthusiasts. Ideal for IoT, STEAM education, smart c...
Delivered by Mon 23 Nov
Fermion: GR10-30 Gesture Sensor (Breakout, UART & I2C, 12 Gestures, 0~30cm)
SKU: DF-SEN0543 | Brand: DFRobot
This GR10-30 gesture sensor is capable of recognizing 12 hand gestures: move up, down, left, right, forward & backward, rotate clockwise & counterclockwise, rotate clockwise & counterclockwise continuously, hover, and...
Delivered by Mon 23 Nov
Adafruit ICM-20649 Wide Range ±30g ±4000dps 6-DoF IMU
SKU: AF-4464 | Brand: Adafruit
The Adafruit ICM-20649 breakout features a wide-range 6-DoF IMU capable of measuring up to ±30g acceleration and ±4000°/s gyroscope rotation — roughly double the range of standard IMUs. When typical ±16g accelerometer...
Delivered by Mon 23 Nov
ESP8266 ESP-01/ESP-01S Relay WiFi Smart Control Module for Arduino
SKU: EC-ESP11002R | Brand: Elecrow
A WiFi-controlled relay module designed for ESP-01 or ESP-01S modules (based on the ESP8266). The relay is controlled via GPIO0 with a low-level trigger, allowing you to switch mains-powered devices on and off wireles...
Delivered by Mon 23 Nov
Adafruit H3LIS331 Ultra High Range Triple-Axis Accelerometer - STEMMA QT / Qwiic
SKU: AF-4627 | Brand: Adafruit
The Adafruit H3LIS331 is an ultra-high-range triple-axis accelerometer capable of measuring up to ±400g across all three axes. Part of the ST LIS331 family, it's designed for applications where standard ±16g accelerom...
Delivered by Mon 23 Nov
SparkFun GPS Breakout - NEO-M9N, Chip Antenna (Qwiic)
SKU: SF-GPS-15733 | Brand: SparkFun
The SparkFun NEO-M9N GPS Breakout with on-board chip antenna is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it ca...
Delivered by Mon 23 Nov
Qwiic IR Breakout
SKU: SF-SPX-15804 | Brand: SparkFun
Have you ever needed to monitor your yogurt in the community fridge because there’s a yogurt thief loose at work? Or have you ever needed the lights to flick on when walking in a room because your hands were full of g...
Delivered by Mon 23 Nov
NeoFlash Acrylic Light Board
SKU: M5-A042 | Brand: Little Bird
Description NEOFLASH is a RGB LED panel with 192 RGB LED(24x8). When you program this Unit, please pay attention to the sequence of the Neopixels. From top left (Where PIR placed) to right, and top to bottom. Co...
Delivered by Mon 23 Nov
Octopus Linear Slider Potentiometer Brick
SKU: EF-EF04061 | Brand: ElecFreaks
A linear sliding potentiometer module from the ElecFreaks Octopus series. Provides an analogue voltage output proportional to the slider position, making it useful as a variable input for controlling volume, brightnes...
Delivered by Mon 23 Nov
SparkFun Distance Sensor Breakout - 4 Meter, VL53L1X (Qwiic)
SKU: SF-SEN-14722 | Brand: SparkFun
This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X uses a VCSEL (V...
Delivered by Mon 23 Nov
Picade PCB - Arduino Compatible with 3W Amp
SKU: PR-PIM110 | Brand: Little Bird
This is an Arduino-compatible board with integrated 3W stereo amplifier designed for use in arcade projects (like our Picade).It behaves like a keyboard when plugged in via USB and has a default key-mapping ...
Delivered by Mon 23 Nov
Ultra Sonic range measurement module
SKU: SS-101990004 | Brand: Seeed Studio
This is a non-contact distance measurement module, which is also compatible with electronic brick. It’s designed for easy modular project usage with industrial performance. Features Detecting range: 3cm-4...
Delivered by Mon 23 Nov
Gravity: Analog Spear Tip pH Sensor / Meter Kit (for Soil and Food Applications)
SKU: DF-SEN0249 | Brand: DFRobot
The Gravity Spear Tip pH Sensor Kit is designed for measuring the pH of semi-solid materials such as wet soil, fruit, meat, and vegetables. The stainless steel spear tip protects the glass electrode and allows the pro...
Delivered by Mon 23 Nov
SparkFun Navigation Switch Breakout
SKU: SF-COM-08236 | Brand: SparkFun
This is a fully assembled simple breakout board for the surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using up and down sel...
Delivered by Mon 23 Nov
SparkFun LED RingCoder Breakout - RGB
SKU: SF-BOB-11040 | Brand: SparkFun
The SparkFun LED RingCoder Breakout provides a visual position indicator for rotary encoders. Two 8-bit shift registers drive a circular LED bargraph that displays the virtual position of the encoder as it turns, givi...
Delivered by Mon 23 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared