All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Gravity: Analog Waterproof Capacitive Soil Moisture Sensor
SKU: DF-SEN0308 | Brand: DFRobot
The Gravity Analogue Waterproof Capacitive Soil Moisture Sensor from DFRobot measures soil moisture using capacitive sensing rather than resistive probes, offering significantly better corrosion resistance and longer ...
Delivered by Thu 18 Jun
Gravity: Arduino pH Sensor / Meter Kit
SKU: DF-SEN0161 | Brand: DFRobot
You may check the latest version - Gravity: Analog pH Sensor/Meter Kit V2 to meet your requirements and Liquid Sensor Selection Guide to get better familiar with our liquid sensor series.Need to measure water quality...
Delivered by Mon 29 Jun
Gravity: Analog Turbidity Sensor For Arduino
SKU: DF-SEN0189 | Brand: DFRobot
The Gravity Analog Turbidity Sensor measures water clarity by detecting the level of suspended particles. It works by measuring light transmittance and scattering rate, which change with the amount of total suspended ...
Delivered by Mon 29 Jun
Gravity: Analog TDS Sensor/Meter for Arduino
SKU: DF-SEN0244 | Brand: DFRobot
The Gravity Analog TDS Sensor is an Arduino-compatible kit for measuring Total Dissolved Solids (TDS) in water. TDS indicates how many milligrams of soluble solids are dissolved per litre — the higher the value, the l...
Delivered by Thu 18 Jun
Gravity: Analog Water Pressure Sensor
SKU: DF-SEN0257 | Brand: DFRobot
The Gravity Analog Water Pressure Sensor measures water or gas pressure and outputs a linear 0.5–4.5 V analogue signal proportional to the applied pressure (0–1.6 MPa). Using the DFRobot Gravity 3-pin interface, it co...
Delivered by Thu 18 Jun
Octopus Analog Capacitive Soil Moisture Sensor
SKU: EF-EF04097 | Brand: ElecFreaks
The Octopus Capacitive Soil Moisture Sensor uses capacitive sensing to detect soil moisture levels, avoiding the corrosion problems common with resistive sensors for a much longer service life. It outputs an analogue ...
Delivered by Thu 18 Jun
Gravity: Analog pH Sensor / Meter Pro Kit V2
SKU: DF-SEN0169-V2 | Brand: DFRobot
DFRobot Gravity: Analog pH meter pro V2 is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. It is commonly used in various applications such as aquaponics, aquaculture, an...
Delivered by Mon 29 Jun
Octopus Soil Moisture Sensor Brick
SKU: EF-EF04027 | Brand: ElecFreaks
Octopus Soil Moisture Sensor Brick can read the amount of moisture present in the soil surrounding it. It's a low tech sensor, but ideal for monitoring an urban garden, or your pet plant's water level. This is a mu...
Delivered by Thu 18 Jun
Gravity: Arduino EC (Electrical Conductivity) Sensor / Meter
SKU: DF-DFR0300 | Brand: DFRobot
The Gravity EC (Electrical Conductivity) Sensor measures the conductivity of aqueous solutions, providing an analogue output for Arduino and compatible microcontrollers. EC measurement is essential for monitoring wate...
Delivered by Mon 29 Jun
Gravity: Arduino Analog Capacitive Soil Moisture Sensor- Corrosion Resistant
SKU: DF-SEN0193 | Brand: DFRobot
The Gravity Analogue Capacitive Soil Moisture Sensor measures soil moisture using capacitive sensing rather than resistive probes, providing significantly better corrosion resistance and longer service life. Made from...
Delivered by Mon 29 Jun
Fermion: MEMS Hydrogen H2 Gas Detection Sensor (Breakout, 0.1-1000ppm)
SKU: DF-SEN0572 | Brand: DFRobot
The Fermion MEMS H2 Sensor is a compact hydrogen gas detection module using micro-electromechanical system (MEMS) technology. It provides qualitative measurement of hydrogen concentration from 0.1 to 1000 ppm via an a...
Delivered by Thu 18 Jun
Gravity: Analog pH Sensor/Meter Kit V2
SKU: DF-SEN0161-V2 | Brand: DFRobot
The Gravity Analog pH Sensor/Meter Kit V2 is designed to measure the pH of liquids, indicating acidity or alkalinity on a scale of 0–14. It's commonly used in aquaponics, aquaculture, hydroponics, and environmental wa...
Delivered by Mon 29 Jun
Fermion: MEMS Volatile Organic Compounds VOC Gas Detection Sensor (Breakout, 1-500ppm)
SKU: DF-SEN0566 | Brand: DFRobot
Fermion: MEMS Volatile Organic Compounds VOC Gas Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA...
Delivered by Thu 18 Jun
Gravity: Arduino ORP Meter V1.0
SKU: DF-SEN0165 | Brand: DFRobot
In the ever-increasing need and awareness for health and safety, water has become a focus point for proper disinfection treatment as aftereffects of industrialization can become a danger for contamination of water...
Delivered by Thu 18 Jun
SparkFun Soil Moisture Sensor (with Screw Terminals)
SKU: SF-SEN-13637 | Brand: SparkFun
A simple breakout board for measuring moisture in soil and similar materials. The two large exposed pads act as probes — functioning as a variable resistor where higher moisture means better conductivity, lower resist...
Delivered by Mon 29 Jun
ADXL335 - 5V ready triple-axis accelerometer (+-3g analog out)
SKU: AF-163 | Brand: Adafruit
A precision triple-axis accelerometer breakout featuring the Analog Devices ADXL335. With a ±3 g measurement range and analog outputs for X, Y, and Z axes, this sensor is ideal for tilt sensing, motion detection, and ...
Delivered by Thu 18 Jun
Gravity: Analog Infrared CO2 Sensor For Arduino (0~5000 ppm)
SKU: DF-SEN0219 | Brand: DFRobot
The concentration of carbon dioxide (0.03% usuallly) is related to daily life. Recently, there's a study showing that the atmospheric CO2 content has reached 0.0385% (385 ppm) which is the highest value since 2.1 ...
Delivered by Thu 18 Jun
DIY Gas Detector - Learn to solder
SKU: LB-LS4968 | Brand: Little Bird
MQ-2 Gas Sensor - Smoke & Flammable Gas Detector The MQ-2 is a reliable, easy-to-use gas sensor that’s ideal for detecting flammable gases like LPG, methane, propane, and even smoke. At its core is tin dioxide (SnO₂...
Delivered by Thu 18 Jun
Gravity: Analog Dissolved Oxygen Sensor / Meter Kit For Arduino (Pre-Order)
SKU: DF-SEN0237-A | Brand: DFRobot
This is a dissolved oxygen sensor kit, which is compatible with Arduino microcontrollers. This product is used to measure the dissolved oxygen in water, to reflect the water quality. It is widely applied in many wa...
Delivered by Mon 29 Jun
Gravity: Arduino CO2 Gas Sensor
SKU: DF-SEN0159 | Brand: DFRobot
The Gravity CO2 Gas Sensor uses an MG-811 electrochemical sensing element to detect carbon dioxide concentration in the air. The output voltage decreases as CO2 concentration increases, and an onboard potentiometer le...
Delivered by Mon 29 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
