All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Gravity: CL2 Sensor (Calibrated) - I2C & UART
SKU: DF-SEN0468 | Brand: DFRobot
This is a sensor that detects chlorine concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of ...
Delivered by Tue 23 Jun
Gravity: O3 Sensor (Calibrated) - I2C & UART
SKU: DF-SEN0472 | Brand: DFRobot
This is a sensor that detects ozone concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of ozo...
Delivered by Tue 23 Jun
Fermion: I2C H3LIS200DL Triple Axis Accelerometer (Breakout) (±100g/±200g)
SKU: DF-SEN0408 | Brand: DFRobot
The Fermion H3LIS200DL is an ultra-low-power, low-noise triple-axis accelerometer with user-selectable full-scale ranges of ±100g and ±200g. Capable of measuring accelerations with output data rates from 0.5 Hz to 1 k...
Delivered by Tue 23 Jun
Fermion: ICG 20660L Accel+Gyro 6-Axis IMU Module (Breakout)
SKU: DF-SEN0443 | Brand: DFRobot
The ICG-20660L is a high-precision 6-axis IMU module that integrates a 3-axis accelerometer(±2/4/8/16g), a 3-axis gyroscope(±125/250/500dps), and on-chip 16-bit ADCs. With up to ±1% initial sensitivity and low noise(6...
Delivered by Tue 23 Jun
Fermion: I2C LIS331HH Triple Axis Accelerometer (Breakout) (±6g/±12g/±24g)
SKU: DF-SEN0407 | Brand: DFRobot
The LIS331HH is an ultra-low-power high precision triple-axis linear accelerometer with 16-bit data output. It has user selectable full scales of ±6g/±12g/±24g and is capable of measuring accelerations with output dat...
Delivered by Tue 23 Jun
Adafruit ICM-20649 Wide Range ±30g ±4000dps 6-DoF IMU
SKU: AF-4464 | Brand: Adafruit
The Adafruit ICM-20649 breakout features a wide-range 6-DoF IMU capable of measuring up to ±30g acceleration and ±4000°/s gyroscope rotation — roughly double the range of standard IMUs. When typical ±16g accelerometer...
Delivered by Fri 12 Jun
Adafruit Feather nRF52 Pro with myNewt Bootloader
SKU: AF-3574 | Brand: Adafruit
The Feather nRF52 Pro is an advanced Bluetooth Low Energy development board built around the Nordic nRF52832, designed specifically for use with the Apache Mynewt RTOS. It features a fully open-source BLE 5.0 stack, a...
Delivered by Thu 2 Jul
Fermion: SGP40 Air Quality Sensor (Breakout)
SKU: DF-SEN0392 | Brand: DFRobot
The SGP40 Air Quality sensor adopts the new SGP40 digital VOC sensor chip launched by the well-known Sensirion. Based on the Sensirion’s CMOSens® technology, the SGP40 offers a complete sensor system on a single chip,...
Delivered by Tue 23 Jun
Serial 6-Axis Accelerometer for Arduino
SKU: DF-SEN0386 | Brand: DFRobot
A high-precision serial 6-axis accelerometer and gyroscope module with a built-in microprocessor, Kalman filter algorithm, and attitude solver. Outputs real-time roll, pitch, and yaw angles with a static accuracy of 0...
Delivered by Tue 23 Jun
BME680 Environmental Sensor Module
SKU: DF-SEN0375 | Brand: DFRobot
BME680 is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatile Organic Compounds) sensor, temperature sensor, humidity sensor and barometer. It is designed for air quality monitor, and du...
Delivered by Fri 12 Jun
Dual Gas CO and CH4 Detection Sensor - MQ-9B
SKU: SF-SEN-17050 | Brand: SparkFun
The MQ-9B is a CO and CH₄ gas detection sensor form Winsen. The sensing material of the MQ-9B is SnO2, which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by method of cycling high and low tem...
Delivered by Tue 23 Jun
Smoke Sensor - MQ-2
SKU: SF-SEN-17049 | Brand: SparkFun
The MQ-2 is a smoke and combustible gas sensor manufactured by Winsen. It detects flammable gases and smoke in a concentration range of 300–10,000 ppm, with particularly high sensitivity to propane and smoke. It's wid...
Delivered by Tue 23 Jun
Hydrogen Sulfide Gas Sensor - MQ-136
SKU: SF-SEN-17052 | Brand: SparkFun
The MQ-136 is a Hydrogen Sulfide detection sensor with a sensing range of 1 - 200ppm. The sensing element is SnO2, which has lower conductivity in clean air. When H₂S gas exists, the sensor’s conductivity gets higher ...
Delivered by Tue 23 Jun
Octopus MG811 CO2 Gas Sensor
SKU: EF-EF04100 | Brand: ElecFreaks
Octopus MG811 CO2 Gas Sensor is a CO2 electronic brick in our OCTOPUS series, the basic design for the outlook, PCB fixing holes and connections are the same with them.The higher the CO2 concentration is, the lower th...
Delivered by Tue 23 Jun
Octopus PM2.5 module
SKU: EF-EF04090 | Brand: ElecFreaks
The Octopus PM2.5 module from ElecFreaks is a laser-based particulate matter sensor built around the ZH03B dust sensor. It measures PM2.5 concentration in the air with high consistency and real-time response, capable ...
Delivered by Tue 23 Jun
Gravity: IIC Ozone Sensor (0-10ppm)
SKU: DF-SEN0321 | Brand: DFRobot
The Gravity IIC Ozone Sensor measures ozone (O₃) concentration from 0 to 10 ppm with 10 ppb resolution using an electrochemical sensing element. Factory-calibrated for accurate readings out of the box, it connects via...
Delivered by Tue 23 Jun
Octopus Smoke Sensor MQ-2 Brick OBMQ2
SKU: EF-EF04029 | Brand: ElecFreaks
An analogue gas sensor module based on the MQ-2 sensor, part of the Octopus Electronic Bricks series for plug-and-play integration with Arduino and compatible boards. Detects a wide range of combustible gases and smok...
Delivered by Tue 23 Jun
Octopus Dust Sensor Detector Module with Sharp GP2Y1010AU0F
SKU: EF-EF11083 | Brand: ElecFreaks
The Octopus Dust Sensor Module features the Sharp GP2Y1010AU0F optical dust sensor, capable of detecting fine particles with a diameter as small as 0.8 μm. It uses an infrared LED and phototransistor to measure dust d...
Delivered by Tue 23 Jun
High Temp Waterproof DS18B20 Digital Temperature Sensor - 3m long
SKU: AF-3846 | Brand: Adafruit
This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive th...
Delivered by Thu 2 Jul
Adafruit HTU21D-F Temperature Humidity Sensor Breakout Board - Fully Assembled
SKU: AF-3515 | Brand: Adafruit
The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's...
Delivered by Fri 12 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
