All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
MPL115A2 - I2C Barometric Pressure/Temperature Sensor
SKU: AF-992 | Brand: Adafruit
This pressure sensor from Freescale is a great low-cost sensing solution for measuring barometric pressure. At 1.5 hPa resolution, it's not as precise as our favorite pressure sensor, the BMx280 series, which has u...
Delivered by Thu 2 Jul
ADXL326 - 5V ready triple-axis accelerometer (+-16g analog out)
SKU: AF-1018 | Brand: Adafruit
A wide-range triple-axis accelerometer breakout featuring the Analog Devices ADXL326. With a ±16 g measurement range and analog outputs for X, Y, and Z axes, this sensor is ideal for detecting high-impact motion, vibr...
Delivered by Thu 2 Jul
CO₂ Humidity and Temperature Sensor - SCD30
SKU: SF-SEN-15112 | Brand: SparkFun
The SCD30 from Sensirion is a high quality Nondispersive Infrared (NDIR) based CO₂ sensor capable of detecting 400 to 10000ppm with an accuracy of ±(30ppm+3%). In order to improve accuracy the SCD30 has temperature an...
Delivered by Tue 23 Jun
Adafruit Feather 32u4 Bluefruit LE with Stacking Headers - Assembled
SKU: AF-3242 | Brand: Adafruit
The Feather 32u4 Bluefruit LE with Stacking Headers combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging — with stacking headers pre-soldered so you ca...
Delivered by Thu 2 Jul
Adafruit Bluefruit LE UART Friend - Bluetooth Low Energy (BLE)
SKU: AF-2479 | Brand: Adafruit
The Adafruit Bluefruit LE UART Friend adds Bluetooth Low Energy connectivity to any microcontroller or computer with a hardware or software serial port. With hardware flow control built in, you won't lose data during ...
Delivered by Fri 12 Jun
Adafruit Bluefruit LE SPI Friend - Bluetooth Low Energy (BLE)
SKU: AF-2633 | Brand: Adafruit
The Adafruit Bluefruit LE SPI Friend adds Bluetooth Low Energy connectivity to any microcontroller with just 4–5 GPIO pins. Using SPI instead of UART means no baud rate configuration or flow control to worry about — c...
Delivered by Thu 2 Jul
Gravity: Arduino Propane Gas Sensor (MQ6)
SKU: DF-SEN0131 | Brand: DFRobot
INTRODUCTION This is an Arduino Propane Gas Sensor. It uses MQ6 probe to detect iso-butane, propane and liquefied petroleum gas (LPG). It is less sensitive with alcohol, cooking fumes an...
Delivered by Tue 23 Jun
Carbon Monoxide Flammable Gas Sensor MQ-9
SKU: PL-1483 | Brand: Pololu
This semiconductor gas sensor detects the presence of Carbon Monoxide at concentrations from 10 to 1,000 ppm and combustible gas from 100 to 10,000 ppm. The sensor’s simple analog voltage interface requires ...
Delivered by Fri 12 Jun
Sharp GP2Y1010AU0F Compact optical Dust Sensor
SKU: DF-SEN0144 | Brand: DFRobot
The Sharp GP2Y1010AU0F is a compact optical dust sensor that uses an internal infrared LED and phototransistor arranged diagonally to detect fine particles in the air. The sensor outputs an analog voltage proportional...
Delivered by Tue 23 Jun
SparkFun Triple Axis Accelerometer Breakout - LIS3DH
SKU: SF-SEN-13963 | Brand: SparkFun
The SparkFun LIS3DH breakout is a low-power, three-axis accelerometer with 12-bit resolution, ideal for adding motion and orientation detection to your projects. It communicates over I2C or SPI and includes three addi...
Delivered by Tue 23 Jun
MinIMU-9 v2 Gyro, Accelerometer, and Compass
SKU: PL-1268 | Brand: Pololu
The Pololu MinIMU-9 v2 is a compact (0.8″ × 0.5″) board that combines ST’s L3GD20 3-axis gyroscope and LSM303DLHC 3-axis accelerometer and 3-axis magnetometer to form an inertial measurement unit (IMU); we therefore r...
Delivered by Fri 12 Jun
SparkFun Digital Temperature Sensor Breakout - TMP102
SKU: SF-SEN-13314 | Brand: SparkFun
The TMP102 is an easy-to-use digital temperature sensor from Texas Instruments. The TMP102 breakout allows you to easily incorporate the digital temperature sensor into your project. While some temperature sensors use...
Delivered by Tue 23 Jun
Adafruit MiCS5524 CO, Alcohol and VOC Gas Sensor Breakout
SKU: AF-3199 | Brand: Adafruit
The Adafruit MiCS-5524 Gas Sensor Breakout is a robust MEMS sensor from SGX Sensortech for detecting carbon monoxide, natural gas leaks, alcohol, and volatile organic compounds (VOCs). It provides a simple analogue vo...
Delivered by Thu 2 Jul
3-Axis MEMS Accelerometer - MMA8452Q
SKU: SF-COM-10953 | Brand: SparkFun
The MMA8452Q is a low-power, 3-axis capacitive MEMS accelerometer with 12-bit resolution. Packed with embedded motion-detection functions and configurable interrupt outputs, it can monitor events autonomously while st...
Delivered by Tue 23 Jun
Adafruit HTU21D-F Temperature Humidity Sensor Breakout Board
SKU: AF-1899 | Brand: Adafruit
The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's...
Delivered by Thu 2 Jul
SparkFun RedBot Sensor - Accelerometer
SKU: SF-SEN-12589 | Brand: SparkFun
The SparkFun RedBot Accelerometer is an add-on sensor that provides bump and motion detection for the RedBot platform. It measures acceleration forces on the X, Y, and Z axes using the MMA8452Q triple-axis acceleromet...
Delivered by Tue 23 Jun
Bluefruit LE Friend - Bluetooth Low Energy (BLE 4.0) - nRF51822 [v3.0]
SKU: AF-2267 | Brand: Adafruit
The Bluefruit LE Friend is your new BLE BFF! This USB-to-BLE board makes it easy to get your computer talking to your BLE enabled phone or tablet using a standard serial/UART connection. In it's simplest form, it w...
Delivered by Thu 2 Jul
Adafruit Triple-Axis Accelerometer - ±2/4/8g @ 14-bit - MMA8451
SKU: AF-2019 | Brand: Adafruit
The Adafruit MMA8451 is a high-precision triple-axis accelerometer with a built-in 14-bit ADC, offering selectable measurement ranges of ±2g, ±4g, and ±8g. Designed by Freescale (now NXP), this sensor detects motion, ...
Delivered by Thu 2 Jul
Optical Dust Sensor - GP2Y1010AU0F
SKU: SF-COM-09689 | Brand: SparkFun
Sharp’s GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflecte...
Delivered by Tue 23 Jun
Carbon Monoxide Sensor - MQ-7
SKU: SF-SEN-09403 | Brand: SparkFun
This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm. This sensor has a high sensitivity and f...
Delivered by Tue 23 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
