All Products

SKU: LB-EAGLED-BUZZ | Brand: Little Bird

EagLED is Little Bird Electronics' wearable development kit. It's a complete Arduino compatible microcontroller that has LEDs, Light Sensor, Push Button and Buzzer built into a snippable board. USB Support The Ea...

SKU: LB-LR0220 | Brand: Little Bird

Light up your E-Textile projects with this set of 5 E-Textile Compatible LED modules. With a working voltage of 3V - 5V and a current of 40mA, these LEDs are perfect for adding a touch of brightness to your wearable e...

SKU: EF-EF03417 | Brand: ElecFreaks

Joystick:bit V2 is a JoyStick based on micro:bit. It contains a 4-direction joystick and 4 undefined buttons as as classic JoyStick. At the same time, with the board buzzer and vibration motor, it also enhance game...

SKU: AF-2223 | Brand: Adafruit

Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins.  The female header part is about 8.5mm tall, good for small HATs that do not to clear t...

SKU: DF-FIT0096-C | Brand: DFRobot

A compact 400 tie-point solderless breadboard in a crystal-clear transparent finish, with interlocking edges and self-adhesive backing. The half-size form factor (82 × 62mm) makes it ideal for small projects, and the ...

SKU: DF-FIT0179 | Brand: DFRobot

Miniature Single Pole Single Throw switches. These are high quality Omron type B3F momentary on switches. Perfect as a tactile reset switch. Mounts directly into standard bread boards also prototype shield. Rated up t...

SKU: AF-755 | Brand: Adafruit

A 10-pack of 1N4001 general-purpose rectifier diodes — one of the most widely used power diodes in electronics. Rated for 1 A continuous forward current and 50 V peak reverse voltage with a typical forward voltage dro...

SKU: EF-EF08292 | Brand: ElecFreaks

ELECFREAKS micro:bit Smart Cutebot Pro Robot Car Kit is a programming robot for STEAM education, it equips with a 4-way infrared line-following sensor, an encoder motor, the LED rainbow light, an ultrasonic sensor, a...

SKU: EC-CMS01101D | Brand: Elecrow

A 10.1" IPS capacitive touchscreen with 1280 × 800 resolution and a distinctive RGB light strip on the back featuring 27 individually addressable LEDs with 19 animated lighting modes. Compatible with Raspberry Pi 3/3B...

SKU: EF-EF03415 | Brand: ElecFreaks

The sensor:bit is a breakout board for the BBC micro:bit that extends all available I/O ports into standard GVS (Ground-Voltage-Signal) pin headers. This makes it easy to connect 3 V electronic modules like LEDs, phot...

SKU: DF-DFR0154 | Brand: DFRobot

A 20×4 character I2C LCD display module compatible with Arduino and other microcontrollers. It shows white characters on a blue backlit background, and the I2C interface means you only need two data pins (SDA and SCL)...

SKU: SF-ROB-11015 | Brand: SparkFun

Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. This smaller solenoid is designed to work directly with 5V which makes it a great match for embedded projects....

SKU: WS-18995 | Brand: Waveshare

This GPIO header adapter is designed specifically for the Raspberry Pi 400, converting its rear-mounted 40-pin GPIO header into two standard 40-pin headers for easy expansion. The colour-coded header makes it simple t...

SKU: WS-31536 | Brand: Waveshare

Unleash the full potential of your Raspberry Pi 5 with the cutting-edge PCIe to M.2 Adapter with PoE Function (C). Designed with power users in mind, this highly adaptable expansion board offers seamless integration o...

SKU: WS-22224 | Brand: Waveshare

A sleek 1.47-inch IPS LCD display module with rounded corners, 172×320 resolution, and 262K RGB colours. The ST7789V3 driver communicates via a 4-wire SPI bus, minimising IO pin usage while delivering clear, colourful...

SKU: AF-5384 | Brand: Adafruit

This 300 mm (11.8") 4-wire cable is fitted with JST-SH female 4-pin connectors on both ends. The 1 mm pitch JST-SH connectors are more compact than the chunkier 2 mm pitch JST-PH, while still providing a secure latchi...

SKU: LB-MACAW | Brand: Little Bird

The Little Bird Macaw is an RGB LED strip 3 programmable LEDs. This Australian made board uses the WS2812B LED (better known as NeoPixels). This LED strip has a chain-able design means you can hook up several modu...

SKU: LB-LR0007 | Brand: Little Bird

Flame Detection Sensor Module for use with Arduino Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive60 degree detection sensor   Two outputs mode: AO: analog output, real-time ou...

SKU: LB-BIRDBIT | Brand: Little Bird

This robot is a graphical programming robot for STEM education utilising the simple programming of the micro:bit to achieve great results.   This compact robot is plug and play allowing children to quickly learn...

SKU: LB-LS0823 | Brand: Little Bird

The Micro: bit GPIO T-type Expansion Board is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pin. This breakout board for the micro:b...