All Products

SKU: LB-LR0335-LB | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant light blue when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow s...

SKU: PI-CAM007 | Brand: Pimoroni

This camera cable adapter converts the smaller Raspberry Pi Zero camera ribbon cable to the standard full-size CSI connector used on Raspberry Pi models A, B, 2, 3, and 4. Connect the narrow end to your Pi Zero camera...

SKU: LB-BK-SPEAKER | Brand: Little Bird

A bulk pack of 20 breadboard-compatible speakers — a Little Bird exclusive. Each speaker comes with jumper wires and standard header pins pre-soldered, so it plugs directly into a breadboard with no extra wiring neede...

SKU: LB-LS0067 | Brand: Little Bird

The knob is designed to set directly on the potentiometer's ridges so it's an easy & secure fit. It has a nice feel, with a rubbery grip, tweaking it is quite fulfilling This is the orange version and it has a nice...

SKU: AF-3859 | Brand: Adafruit

A 4×AA battery holder with premium jumper header wires that plug directly into a breadboard. No stripping or soldering required — just insert the header pins into your breadboard rails and start prototyping with porta...

SKU: AF-1443 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in green LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired ...

SKU: AF-1444 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in yellow LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired...

SKU: LB-LS0657 | Brand: Little Bird

A high-fidelity DAC expansion board for Raspberry Pi that delivers superior audio quality over the Pi's built-in 3.5mm output. Built around Texas Instruments' PCM5122 DAC chip, this board connects via the I2S interfac...

SKU: LB-LR0214-50 | Brand: Little Bird

The 42BYG is a NEMA 17 bipolar stepper motor with a shaft-reversed design, commonly used in 3D printers, CNC machines, and DIY motion-control projects. With a 1.8° step angle and 40 N·cm holding torque, it provides re...

SKU: LB-LR0400 | Brand: Little Bird

A 1kg straight bar load cell (strain gauge) that converts applied force into a measurable electrical signal. Made from aluminium alloy with four strain gauges in a Wheatstone bridge configuration, this sensor is ideal...

SKU: AF-1468 | Brand: Adafruit

Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even acro...

SKU: LB-LR0281-9 | Brand: Little Bird

The TrinityPixel WS2812B is a 5-metre waterproof RGB LED strip featuring 30 individually addressable LEDs per metre (150 total). Each LED can be set to any 24-bit colour (8-bit PWM per red, green, and blue channel), g...

SKU: TB-TS1620 | Brand: Little Bird

An entry-level temperature-controlled soldering station ideal for hobbyists and beginners. The lightweight iron features an anti-slip grip and comes with a tip-cleaning sponge, while the base unit provides analogue te...

SKU: LB-LR0240 | Brand: Little Bird

With the sound module, we can detect the presence of loud sounds. While this module has a microphone on it, our Arduino does not have the brains to interpret or record the audio directly (there are some shields you...

SKU: AF-1592 | Brand: Adafruit

A set of 12 short alligator clip test leads for making quick temporary connections without soldering. Each lead has a vinyl-covered alligator clip on both ends, colour-coded across six colours for easy circuit identif...

SKU: AF-2136 | Brand: Adafruit

A compact 3-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to mainta...

SKU: AF-2004 | Brand: Adafruit

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...

SKU: AF-1862 | Brand: Adafruit

A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin ...

SKU: DF-DFR0094 | Brand: DFRobot

Infrared devices are widely used, and often for remote controlled devices. With this IR receiver, your Arduino project is now able to receive command from any IR remote controller. Well, it will be also easy...

SKU: DF-FIT0129 | Brand: DFRobot

The 4x4 Keypad is a general purpose 16 button (4x4) matrix keypad. It comes ready to work, simply peel-off the adhesive backing, stick it to your surface and plug it in.