All Products

SKU: AF-4570 | Brand: Adafruit

The Adafruit DS1841 is an I2C-controlled logarithmic digital potentiometer from Maxim with a resistance range of 3.7 kΩ to 22 kΩ across 128 tap points. Unlike linear potentiometers, the DS1841's logarithmic response c...

SKU: AF-5233 | Brand: Adafruit

The Adafruit ATtiny817 Breakout with seesaw is a compact development board that combines an ATtiny817 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. Pre-programmed with seesaw firmw...

SKU: SF-COM-18161 | Brand: SparkFun

Although small in size, KW4-Z5F roller microswitches are rated for controlling electrical loads ranging from logic level (computer based circuits) to power duty switching (up to 16.1 A and 250 Vac). The package size o...

SKU: AF-5309 | Brand: Adafruit

The Adafruit MSA311 is a compact, low-cost triple-axis accelerometer with 14-bit resolution and a rich set of built-in motion detection features. Very similar to the MSA301 but with an updated I2C address (0x62 instea...

SKU: LB-XC9201 | Brand: Little Bird

Arduino Sensor Kit is made for Makers who have just started using Arduino to explore the vast space of electronics and programming. This kit teaches how to connect and program basic Grove modules that includes both se...

SKU: AF-4899 | Brand: Adafruit

The Adafruit SPI Flash SD Card breakout features an XTSD 512 MB chip — an SD card in an SMT package that you can wire up like standard SPI flash but use with existing SD card libraries. It comes pre-formatted as a 512...

SKU: DF-DFR0827 | Brand: DFRobot

PiTray mini is a Model B liked carrier board for building cluster with Raspberry Pi Computed Module 4 (CM4). PiTray mini focuses on providing a neat and budget solution for CM4 applications. With the same outline...

SKU: DF-DFR0745 | Brand: DFRobot

Wanna buy a simple & practical voice recorder? This one is right for you! The voice recorder module supports 4 controlling modes (Arduino, AT command, on-board buttons, and ADKEY), and multi-segment voice recording. Y...

SKU: EC-ARS01119B | Brand: Elecrow

ESP-WROOM-32 is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streamin...

SKU: DF-SEN0365 | Brand: DFRobot

We live in a colorful world, but how much do you really know about color? You eyes may deceive you, while the sensors don’t lie. This AS7341 11-Channel Visible Light Sensor-Breakout can tell you the truth about col...

SKU: EC-DPO28090B | Brand: Elecrow

The NodeMCU V2 is a Wi-Fi development board based on the ESP8266 (ESP-12E module) with an on-board PCB antenna and USB programming interface. It supports 802.11 b/g/n wireless networking and can operate in STA, AP, or...

SKU: SF-DEV-17287 | Brand: SparkFun

The BBC micro:bit v2.21 is your gateway to hands-on learning, creativity, and innovation with digital technology. This pocket-sized powerhouse packs impressive features into a board that’s half the size of a credit ca...

SKU: AF-4663 | Brand: Adafruit

The 6V Air Valve (FA0520E) is a 3-port solenoid valve for pneumatic systems, functioning similarly to an electrical relay. It features a common port (COM), a normally open port, and a normally closed port, allowing yo...

SKU: AF-4711 | Brand: Adafruit

The AP3429A Buck Converter Breakout steps down 3.4–5.5V input to a stable 3.3V output at up to 1.2A, with 90–95% efficiency. It's ideal for powering 3.3V circuits from LiPo batteries, 3× alkaline cells, or USB power s...

SKU: EC-PCW10301C | Brand: Elecrow

This is a Type-B USB cable, which is compatible with Arduino Uno. It's a 3m cable and long enough for normal use.

SKU: EC-ARS27361T | Brand: Elecrow

This motor shield uses dual TB6612 MOSFET drivers and a PCA9685PW I2C PWM controller to drive up to 4 DC motors or 2 stepper motors from an Arduino or compatible board. All motor control and speed management is handle...

SKU: EC-ACS15238R | Brand: Elecrow

The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine) band, a set of frequencies set aside for low-power, short-range, license-free radios. I...

SKU: EC-ACA30002A | Brand: Elecrow

The Component Kit for Arduino E3 is a starter-friendly assortment of essential electronic components for use with any Arduino-compatible board. It includes a broad range of resistor values, LEDs in four colours, tacti...

SKU: DF-DFR0647 | Brand: DFRobot

A compact 0.91-inch monochrome OLED display module with 128×32 white self-illuminating pixels, driven by the SSD1306 over I2C. The chip-on-back pad design and ultra-narrow PCB (41 × 12 mm) make it ideal for wearables,...

SKU: AF-4488 | Brand: Adafruit

The Adafruit LIS2MDL is a triple-axis magnetometer (compass) breakout from ST, capable of sensing magnetic fields across a wide ±50 gauss (±5000 µT) range with no range configuration required. It's ideal for detecting...