All Products

SKU: DF-SEN0257 | Brand: DFRobot

The Gravity Analog Water Pressure Sensor measures water or gas pressure and outputs a linear 0.5–4.5 V analogue signal proportional to the applied pressure (0–1.6 MPa). Using the DFRobot Gravity 3-pin interface, it co...

SKU: SF-DEV-14495 | Brand: SparkFun

The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with you...

SKU: AF-1769 | Brand: Adafruit

This JST PH 2-pin SMT right-angle connector is a surface-mount header designed to accept standard JST PH 2-pin plugs. It's commonly used as a battery connector on microcontroller boards, LiPo chargers, and small elect...

SKU: AF-1222 | Brand: Adafruit

The Adafruit GEMMA V2 is a tiny, coin-sized wearable microcontroller board powered by an ATtiny85 processor. At just 28 mm in diameter, it's small enough to fit into any sewable or wearable project, and affordable eno...

SKU: DF-DFR0052 | Brand: DFRobot

The DFRobot Vibration Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is propotional with the strength of vibration.So you can know the...

SKU: DF-FIT0186 | Brand: DFRobot

This is a Gear Motor w/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.8:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the m...

SKU: SF-TOL-09162 | Brand: SparkFun

This is your basic tube of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 15 grams (around 5ft). Easy to solder with - recommended for beginners. Mix: 63% Sn / 37% Pb

SKU: SF-TOL-08793 | Brand: SparkFun

Mini Pliers. These are great little pliers! A must have for any hobbyist or electrical engineer. Crucial for inserting devices into bread boards and bending pins. 4" long.

SKU: SF-COM-08642 | Brand: SparkFun

This is a small device called a reed switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the ...

SKU: DF-DFR0151 | Brand: DFRobot

The DS1307 Real Time Clock module developed by one of our designers: Waiman. The module comes fully assembled and pre-programmed with the current time (ok, so it's our current time - MST). The included Lithium co...

SKU: DF-FIT0322 | Brand: DFRobot

This package includes 17 species transistors in common use.It's convenient for you to make some small designs.You could find a suitable one for your type! A transistor is a semiconductor device used to amplify and sw...

SKU: SF-PRT-08023 | Brand: SparkFun

Standard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SKU: SF-COM-11992 | Brand: SparkFun

A compact red momentary push button designed for panel mounting. This SPST normally-open switch is ideal for basic on/off, reset, and trigger functions in electronic projects and enclosures. Specifications Type: SP...

SKU: SF-PRT-08022 | Brand: SparkFun

Standard 22 AWG solid Black hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SKU: DF-DFR0260 | Brand: DFRobot

The Arduino DMX Shield is a low-cost, high-quality interface that connects your Arduino to DMX512 lighting networks. Built around the MAX485 transceiver and equipped with NEUTRIK XLR 3-pin connectors (one male, one fe...

SKU: AF-165 | Brand: Adafruit

The TMP36 is a low-power analog temperature sensor that outputs a voltage proportional to ambient temperature. It operates on 2.7–5.5V and requires no external calibration — simply read the analog voltage and convert ...

SKU: AF-254 | Brand: Adafruit

Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. Onboard 5v->3v regulator provides 150mA for power-hungry cards 3v level shifting means you can use this with ease ...

SKU: SF-CAB-13243 | Brand: SparkFun

This is a USB 2.0 type B to Mini-B 5-pin black cable. You know, the mini-B connector that usually comes with USB Hubs, Cameras, MP3 players, etc. We specifically like these 6" long cables because using USB peripherals...

SKU: AF-368 | Brand: Adafruit

A simple adapter that converts a 2.1 mm DC barrel jack to screw terminals, making it easy to connect a DC power supply to boards or projects that lack a DC jack. The terminals are labelled with positive and negative p...

SKU: AF-400 | Brand: Adafruit

Breakaway header is like the duct tape of electronics, and this header is one better with extra long pins on both sides. This makes it great for connecting things together that have two sockets - especially sold...