All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Anti-static ESD Tweezers 9 pieces in case
SKU: LB-LS1137 | Brand: Little Bird
This set of 9 ESD-safe tweezers covers a range of tip styles for precision electronics work. The anti-static coating helps prevent electrostatic damage when handling sensitive components, and the fine tips allow you t...
Delivered by Tue 24 Nov
Ring:bit Car — Educational Smart Robot Kit for Kids (Without Micro:bit board)
SKU: EF-EF09079 | Brand: ElecFreaks
Ring:bit car is a DIY smart car which is based on BBC micro:bit and ELECFREAKS ring:bit. Ring:bit has extended 3 channels of GPIO, among which 2 channels are used for driving servos and one channel of GPIO is undefine...
Delivered by Tue 24 Nov
16mm Illuminated Pushbutton - Blue Latching On/Off Switch
SKU: AF-1476 | Brand: Adafruit
A 16mm illuminated pushbutton with a built-in blue LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired i...
Delivered by Tue 24 Nov
Arcade Button with LED - 30mm Translucent Yellow
SKU: AF-3488 | Brand: Adafruit
This 30mm translucent yellow arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with a ~1K resistor are embedded in the button body in a series configuration, drawing just 5mA fro...
Delivered by Tue 24 Nov
USB to Micro-B Adapter
SKU: SF-COM-14567 | Brand: SparkFun
It’s tiny, it’s handy, and it can give your normal USB-equipped device a micro-B connector! With the USB to Micro-B Adapter you can make a flash drive connect to your tablet, connect a keyboard to your phone in order ...
Delivered by Tue 24 Nov
Green Wire Wrap Wire on Spool 250m 30AWG
SKU: LB-LS0153G | Brand: Little Bird
Green Wire Wrap Wire on Spool 250m 30AWG Wire Wrapping Wire, 30 AWG External Material :PVC PVC insulation, Tinned copper conductor Diameter: 0.5 mm Inner diameter:0.25 mm Length:250 meters Heat-resistant: 80 degrees
Delivered by Tue 24 Nov
Button Switch Sensor Module
SKU: LB-LR0022 | Brand: Little Bird
It's a push button!A push button with resistors and breadboard friendly layout.**Push Button Pinout:**- Signal (High when button pushed)- Positive- Ground**Specifications:**- 600mW MAX (50mA at 12v)
Delivered by Tue 24 Nov
USB Cable with Switch
SKU: AF-1620 | Brand: Adafruit
Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your elec...
Delivered by Tue 24 Nov
Silicone Cover Stranded-Core Wire - 2m 30AWG Green
SKU: AF-2005 | Brand: Adafruit
Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...
Delivered by Tue 24 Nov
Adafruit LED Sequins - Rose Pink - Pack of 5
SKU: AF-1792 | Brand: Adafruit
Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...
Delivered by Tue 24 Nov
Switched JST-PH 2-Pin SMT Right Angle Breakout Board
SKU: AF-1863 | Brand: Adafruit
This switched JST connector is the best way to quickly prototype with our LiPoly batteries. We paired a genuine JST connector with a slide switch that can do up to 600mA. Both are soldered onto a breadboard-friendl...
Delivered by Tue 24 Nov
TXB0104 Bi-Directional Level Shifter [TXB0104]
SKU: AF-1875 | Brand: Adafruit
Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V de...
Delivered by Tue 24 Nov
GPIO Header for Raspberry Pi A+/B+/Pi 2/Pi 3 [2x20 Female Header]
SKU: AF-2222 | Brand: Adafruit
Connect your own PCB to a Raspberry Pi B+ with this normal-height female header. The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3m...
Delivered by Tue 24 Nov
Sub-micro Servo - SG51R
SKU: AF-2201 | Brand: Adafruit
This is just about the cutest, tiniest little micro servo we could find, even smaller than the 9 gram micro servos we love so much. It can rotate approximately 180 degrees (90 in each direction) and works just l...
Delivered by Tue 24 Nov
SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header
SKU: AF-2187 | Brand: Adafruit
A custom-made 2×20 short female header designed for surface-mount (SMT) Raspberry Pi HAT designs. This header provides the slimmest possible profile when you need a low-clearance connection between your HAT and a Rasp...
Delivered by Tue 24 Nov
APA102 5050 RGB LED w/ Integrated Driver Chip - 10 Pack [APA102C]
SKU: AF-2343 | Brand: Adafruit
These APA102C (DotStar) RGB LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable 24-bit colour control (8 bits each for red, green, and blue). The same smart LED use...
Delivered by Tue 24 Nov
Brass M2.5 Standoffs 16mm tall - Black Plated - Pack of 2
SKU: AF-2337 | Brand: Adafruit
Finally we get our very own super sweet sixteen... 16 millimeters that is! Our Black Plated M/F Brass 16mm Standoffs are engineered specifically to keep your PiTFT or other Pi accessories w...
Delivered by Tue 24 Nov
CAT 5 Ethernet Cable
SKU: DF-FIT0116 | Brand: DFRobot
This is a high quality Category 5 (CAT5) patch cables is the solution to your internetworking needs. DOCUMENTS Cat 5 Definition
Delivered by Tue 24 Nov
micro:bit Expansion Board for Boson (Gravity Compatible)
SKU: DF-DFR0521 | Brand: DFRobot
The micro:bit Expansion Board for Boson is a carry-on board that connects to the BBC micro:bit via edge connector, replacing crocodile clips with six keyed 3-pin sockets. It is compatible with DFRobot's Boson and Grav...
Delivered by Tue 24 Nov
ESP32 Thing Stackable Header Set
SKU: SF-PRT-14311 | Brand: SparkFun
These headers are made to work with the SparkFun ESP32 Thing and ESP32 Power Control Shield boards. Each set of headers makes your ESP32 Thing easily stackable with the Power Control Shield or other applications. This...
Delivered by Tue 24 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared