All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Delivered by Thu 25 Jun
EL Wire - Light Blue 5m With Inverter
SKU: LB-LR0281-5-LB | Brand: Little Bird
A 5-metre length of light blue electroluminescent (EL) wire with a battery-powered inverter included. EL wire is a flexible, phosphor-coated wire that emits a cool, even glow along its entire length — similar in appea...
Delivered by Thu 25 Jun
Micro:bit AA battery holder with Switch
SKU: LB-BATTERYAA | Brand: Little Bird
A 2× AA battery holder with on/off switch, designed for powering the BBC micro:bit on the go. The JST connector plugs directly into the micro:bit's battery port, and the ~14 cm cable provides enough length for flexibl...
Delivered by Thu 25 Jun
GPIO Ribbon Cable 2x8 IDC Cable - 16 pins 12 long
SKU: AF-4170 | Brand: Adafruit
A 16-pin (2×8) IDC ribbon cable with keyed connectors on both ends, 305mm (12") long. The 0.05" pitch ribbon cable connects to standard 2×8 0.1" × 0.1" IDC headers. Pin 1 is marked with a white stripe along the cable ...
Delivered by Thu 25 Jun
Kitronik Inventor's Kit for the BBC micro:bit
SKU: KI-5603 | Brand: Kitronik
The Kitronik Inventor's Kit is a comprehensive electronics starter kit designed for the BBC micro:bit. Includes everything you need to complete 12 hands-on experiments using LEDs, motors, LDRs, capacitors, a potentiom...
Delivered by Thu 25 Jun
Gravity: I2C LCD1602 Arduino LCD Display Module (Green)
SKU: DF-DFR0556 | Brand: DFRobot
A 16×2 character LCD display module from DFRobot's Gravity series, connecting to your Arduino or microcontroller via a simple I²C interface — just two data wires instead of the many parallel connections a standard LCD...
Delivered by Thu 25 Jun
Through-Hole Resistors - 4.7K ohm 5% 1/4W - Pack of 25
SKU: AF-2783 | Brand: Adafruit
ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 4.7K Ω Resistors. More specifically, they are carbon film,...
Delivered by Thu 25 Jun
Pro Mini board ATMEGA328P 5V/16M
SKU: LB-LR0509A | Brand: Little Bird
Specification:14 Digital input / output port: RX, TX, D2 - D138 analog inputs: A0 - A71 pairs of ports TTL level serial transceiver: RX / TX6 PWM ports: D3, D5, D6, D9, D10, D11Using Atmel AtMega328P-AU MCUSupport...
Delivered by Thu 25 Jun
Plastic Solder Sucker Vacuum
SKU: LB-LS01030 | Brand: Little Bird
The solder vacuums are a great tool for solder rework. They allow you to pull the molten solder out of a connection or via with ease. To use it you simply depress the plunger, heat up your solder, place the nozzl...
Delivered by Thu 25 Jun
Pico HAT Hacker
SKU: PR-PIM300 | Brand: Little Bird
The Pico HAT Hacker is an ultra-thin breakout board that gives you full access to all 40 GPIO pins on your Raspberry Pi. At just 0.8 mm thick, it solders directly onto the Pi's header pins while leaving enough pin hei...
Delivered by Thu 25 Jun
MCP4725 Breakout Board - 12-Bit DAC w/I2C Interface
SKU: AF-935 | Brand: Adafruit
The MCP4725 breakout board provides a 12-bit digital-to-analogue converter (DAC) over I2C. Send a digital value and the VOUT pin outputs the corresponding analogue voltage — ideal for generating waveforms, adjustable ...
Delivered by Thu 25 Jun
5M Flexible el wire with battery holder 5mm - Blue
SKU: LB-LR0335-B | Brand: Little Bird
This 5-metre length of EL wire (electroluminescent wire) glows a vibrant blue when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar...
Delivered by Thu 25 Jun
5M Flexible el wire with battery holder 5mm - Pink
SKU: LB-LR0335-PI | Brand: Little Bird
This 5-metre length of EL wire (electroluminescent wire) glows a vibrant pink when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar...
Delivered by Thu 25 Jun
Little Bird L3G4200D based 3 Axis Gyro
SKU: LB-LR0401 | Brand: Little Bird
Product Overview The L3G4200D Gyroscope Module is a low power 3-Axis angular rate sensor with temperature data. The gyroscope shows the rate of change in rotation on its X,Y and Z axes. Temperature output data and...
Delivered by Thu 25 Jun
E-Textiles ADXL335 three axis acceleration sensor
SKU: LB-ETEXTILEADXL335 | Brand: Little Bird
This three-axis accelerometer is designed for e-textiles projects and is based on the ADXL335 MEMS accelerometer from Analog Devices. It can be used to detect joint movement, inclination and vibration.The board provid...
Delivered by Thu 25 Jun
Red Wire Wrap Wire on Spool 250m 30AWG
SKU: LB-LS0153R | Brand: Little Bird
Red Wire Wrap Wire on Spool 250m 30AWG Wire Wrapping Wire, 30 AWG External Material :PVC PVC insulation, Tinned copper conductor Diameter: 0.5 mm Inner diameter:0.25 mm Length:250 meters Heat-resistant: 80 degrees
Delivered by Thu 25 Jun
Soldering Iron Cleaner Sponge
SKU: LB-LS0305 | Brand: Little Bird
Soldering Solder Iron Tip Cleaner Steel Cleaning Wire Sponge BallIn order to reduce the temperature decreasing of soldering tip, you should not clean it with water.After you using the Sponge, it should be cleaned out ...
Delivered by Thu 25 Jun
Gravity: Analog Water Pressure Sensor
SKU: DF-SEN0257 | Brand: DFRobot
The Gravity Analog Water Pressure Sensor measures water or gas pressure and outputs a linear 0.5–4.5 V analogue signal proportional to the applied pressure (0–1.6 MPa). Using the DFRobot Gravity 3-pin interface, it co...
Delivered by Thu 25 Jun
SparkFun Qwiic Adapter
SKU: SF-DEV-14495 | Brand: SparkFun
The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with you...
Delivered by Thu 25 Jun
JST-PH 2-Pin SMT Right Angle Connector
SKU: AF-1769 | Brand: Adafruit
This JST PH 2-pin SMT right-angle connector is a surface-mount header designed to accept standard JST PH 2-pin plugs. It's commonly used as a battery connector on microcontroller boards, LiPo chargers, and small elect...
Delivered by Thu 25 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
