All Products

SKU: LB-PT91059-300-B | Brand: Little Bird

This flexible blue LED filament produces a 360° glow similar to traditional incandescent filament bulbs, but in a bendable, low-voltage format. At 300 mm long and operating at just 3 V, it's ideal for creative lightin...

SKU: LB-LR0214-110A | Brand: Little Bird

Raspberry Pi 8 channel Level Switching (3.5V to 5V) IO Module Logic Level Converter is able to convert signals from 5V down to 3.3V (and vice versa) meaning you can safely use 5V or 3.3V devices with the Raspberry ...

SKU: LB-EAGLED-LED-O | Brand: Little Bird

EagLED LEDs are purpose-built for e-textiles and wearable projects. This pack of 10 orange sewable LEDs come attached to each other on a snappable strip — simply break them apart as needed and sew them into clothing, ...

SKU: LB-PT-LOOP | Brand: Little Bird

This is a simple loop cable supplied with a 5.2mm ring and matching fastening hardware.It is useful when you need a cable with a ring-style end for a project, repair, or replacement part.Includes:1 x Cable with 5.2mm ...

SKU: DF-FIT0871 | Brand: DFRobot

The Argon ONE M.2 is a premium aluminium alloy case for the Raspberry Pi 4B, featuring an M.2 SATA SSD expansion slot for faster boot times and larger storage. With its Space Grey finish, full-size dual HDMI output, a...

SKU: EF-EF08256 | Brand: ElecFreaks

The micro:bit Smart Health Kit has a well-selection of the Sensor:bit, Analog UV Sensor, PIR Sensor, MQ3 Alcoholic Sensor Brick, Servo and etc., we could use it to build such themes as the UV light detections, the ...

SKU: LB-LS1697 | Brand: Little Bird

This is the Light and Colour Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and colour measuring, proximity detection, and touch-less gesture sensing. With this Light...

SKU: SF-WRL-17841 | Brand: SparkFun

A compact wide-band internal antenna covering 700–2700 MHz, suitable for 4G LTE, LoRa, BLE, and other RF applications. The FPC radiator element connects via a 100mm coaxial cable with an IPEX (u.FL equivalent) connect...

SKU: DF-DFR0668 | Brand: DFRobot

This is a Type-C  Lipo charger designed for single-cell 3.7V lithium battery. The compact size makes it easy to integrate into your applications. The charger adopts TP4056X lithium battery charging IC, which guar...

SKU: EC-ASW51001E | Brand: Elecrow

The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip . The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up...

SKU: EC-ACC05010A | Brand: Elecrow

This 1.5-meter-long wire will perfectly match the input port of your raspberry pi 4! Support transfer 720P/1080i/1080P Full HD 4K 60Hz high-definition video.High-quality material, 24K gold-plated connector, strong cor...

SKU: AF-4528 | Brand: Adafruit

A 100 mm adapter cable that bridges the gap between Grove and STEMMA QT / Qwiic ecosystems. One end features a Grove connector, the other a JST SH (STEMMA QT / Qwiic compatible) connector — making it easy to mix and m...

SKU: LB-CTC-CAPS | Brand: Little Bird

These are two pin jumpers (also called shunts) that will create an electrical connection for the 2.54mm(0.1") male pin headers.  The Crack the Code shield uses these on the buzzer module.  These little j...

SKU: EF-EF08203 | Brand: ElecFreaks

The Smart Science IoT Kit from ElecFreaks is a comprehensive sensor and IoT learning kit built around the IoT:bit breakout board for micro:bit. It combines environmental sensors with WiFi connectivity, allowing studen...

SKU: AF-3870 | Brand: Adafruit

A compact push-button toggle switch — press once to turn on, press again to turn off. Often called a "flashlight switch" due to its common use in small torches, this latching switch is ideal as a power switch or mode ...

SKU: LB-00185 | Brand: Little Bird

A 10-wire splittable ribbon jumper cable with female (socket) connectors on both ends. Each wire is colour-coded and can be peeled apart individually or in groups to suit your wiring needs. At 300mm (30cm) long, they'...

SKU: LB-CTCREP | Brand: Little Bird

Already run the Crack the Code Unit of Work and want to replenish your component box and student sets? At Little Bird Electronics we have put together a replenishment kit for your Crack the Code unit of work. &nbsp...

SKU: SF-PRT-14492 | Brand: SparkFun

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1K ohm resistors make excellent pull-ups, pull-downs and current limiters....

SKU: AF-1063 | Brand: Adafruit

A well-designed electret microphone amplifier breakout built around the Maxim MAX4466 op-amp, specifically engineered for microphone amplification with excellent power supply noise rejection. The board comes fully ass...

SKU: AF-1314 | Brand: Adafruit

A 3-inch (76.2 mm) speaker cone with 4 Ω impedance and 3 W power handling. Four mounting tabs spaced 60 mm apart make it easy to secure in enclosures or project housings. Pairs well with Class D amplifier boards for c...