All Products

SKU: LB-LS0824-V2 | Brand: Little Bird

This IO expansion board adapter for the micro:bit V2 breaks out all pins to accessible connectors, making it easy to connect sensors, modules, servos, and other peripherals to your micro:bit projects without alligator...

SKU: SF-COM-21311 | Brand: SparkFun

A compact, thin speaker ideal for projects where space is tight. At just 28 mm in diameter and approximately 4 mm thick, it fits into enclosures and wearables where standard speakers won't. The pre-wired 180 mm cable ...

SKU: AF-5699 | Brand: Adafruit

The Raspberry Pi Debug Probe is an all-in-one USB-to-debug kit that provides all the necessary hardware and cables for easy, solderless, plug-and-play debugging. For when "printf-style-debugging" just isn't enough,...

SKU: WS-21443 | Brand: Waveshare

A USB-to-UART communication module based on the CH343G chip, offering data rates up to 6 Mbps via a USB-C connector. It supports selectable TTL output levels (3.3 V or 5 V) and works across Windows, macOS, Linux, and ...

SKU: AF-5346 | Brand: Adafruit

The Adafruit MCP23017 I2C GPIO Expander Breakout adds 16 extra GPIO pins to any microcontroller or microcomputer over I2C. Each pin can be configured as a digital output (driving up to 25 mA — perfect for LEDs) or as ...

SKU: DF-FIT0800 | Brand: DFRobot

A compact amphibious micro submersible pump perfect for building small fountains, automated plant watering systems, and DIY water projects. Powered by 3–6V DC, it features low noise operation, high efficiency, and eas...

SKU: AF-4401 | Brand: Adafruit

This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching fe...

SKU: LB-LS3639 | Brand: Little Bird

A 122-piece assortment of wheels, motors, and gears for quick prototyping and hands-on tinkering. This kit gives you the mechanical building blocks to create simple motorised chassis, spinning art projects, and other ...

SKU: LB-LS1773-12V | Brand: Little Bird

An 8-channel 12V relay module with USB-A interface for computer-based control. Uses the ULN2803 relay driver chip and genuine Songle relays for stable operation. Each relay is rated for 10A switching. Features both a...

SKU: LB-LS2788 | Brand: Little Bird

A 100-piece assortment of solder seal heat shrink butt connectors in four sizes. These connectors combine soldering, insulation, and waterproof sealing into a single step — just apply heat and the solder ring melts to...

SKU: LB-PT-M38 | Brand: Little Bird

A compact Bluetooth 4.2 audio receiver module (MH-M18) that streams two-channel stereo audio wirelessly from your phone, tablet, or other Bluetooth device. Once paired, it delivers lossless audio playback with a conne...

SKU: LB-LR0024 | Brand: Little Bird

The rotary encoder is an electro-mechanical switch. Its output signal can be used to determine the direction that its knob is being rotated. Not only that, but it is also capable of continuous rotation, unlike a regul...

SKU: AF-3857 | Brand: Adafruit

The Feather M4 Express is built around the ATSAMD51J19, a 120 MHz Cortex M4 processor with hardware floating point and DSP instructions, 512 KB flash, and 192 KB RAM. It ships with CircuitPython pre-loaded — plug it i...

SKU: PL-1702 | Brand: Pololu

These premium jumper wires are stranded 26 AWG wires with male terminations on both ends, for use with 0.1″ (2.54 mm) fefemale headers, connectors, and solderless breadboards and breadboards. The assortm...

SKU: AF-1186 | Brand: Adafruit

OMG WATCH OUT! This 100mm diameter arcade button with a 16mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, howev...

SKU: LB-LR0555 | Brand: Little Bird

A great little project to help you learn to solder. This DIY heart shaped light up project comes with 18 bright LEDs to solder onto the board. They form a flashing pattern that repeats.  

SKU: LB-ETEXTILELED-G | Brand: Little Bird

This is a simple single unit GREEN E-Textile LEDEach unit can be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!These are a thicker PCB t...

SKU: LB-ETEXTILELED-W | Brand: Little Bird

A sewable white LED module designed for e-textile projects. This single-unit LED can be stitched directly into fabric using conductive thread, making it easy to add illumination to wearable electronics and textile-bas...

SKU: LB-LR0214-37 | Brand: Little Bird

Other Features: Voltage: 3V / 5V; Amplification factor: 330; Wavelength: 609nm; A product for Arduino.1 x   Pulse sensor Pulse Heart Rate Sensor Module  

SKU: LB-LS0199 | Brand: Little Bird

A colourful assortment of 160 miniature tactile push buttons in eight different colours, neatly organised in a handy storage container. Perfect for adding colour-coded inputs to your electronics projects. Key Feature...