All Products

SKU: DF-SEN0204 | Brand: DFRobot

A non-contact liquid level sensor that detects the presence of liquid through a container wall — no direct contact with the liquid required. Using advanced signal processing via the XKC-Y25-T12V chip, it works through...

SKU: AF-3333 | Brand: Adafruit

The Circuit Playground Express is an all-in-one development board packed with sensors, LEDs, and a speaker — all on a round, beginner-friendly PCB with alligator-clip pads. No soldering required. It supports four prog...

SKU: DF-DFR0071 | Brand: DFRobot

The DFRobot SD Module (DFR0071) is a breakout board that adds standard SD and Micro SD (TF) card storage to your Arduino projects. Use it for data logging, file storage, and transferring data between your microcontrol...

SKU: AF-3487 | Brand: Adafruit

This 30mm translucent green arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with resistors are embedded in the button body, ready to light up from a microcontroller pin or dire...

SKU: AF-3562 | Brand: Adafruit

If you're looking to make a custom cable with any two of our HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never been easier. Just grab one of these cables...

SKU: EF-EF04097 | Brand: ElecFreaks

The Octopus Capacitive Soil Moisture Sensor uses capacitive sensing to detect soil moisture levels, avoiding the corrosion problems common with resistive sensors for a much longer service life. It outputs an analogue ...

SKU: LB-LS4437 | Brand: Little Bird

A festive DIY soldering kit that assembles into a two-sided LED Christmas tree, complete with a clear acrylic display case. Perfect for beginners learning to solder or hobbyists who enjoy seasonal electronics projects...

SKU: WS-31199 | Brand: Waveshare

ESP32-S3 1.47inch Touch Display Development BoardUnleash your creative potential and dive into the world of IoT development with the remarkable ESP32-S3 1.47inch Touch Display Development Board. This cutting-edge plat...

SKU: EF-EF08314 | Brand: ElecFreaks

Smart Climate Kit is an innovative product designed based on micro:bit V2 and IOT:bit expansion board. Equipped with a variety of sensors such as wind speed sensor, temperature and humidity sensor, UV sensor, dust se...

SKU: WS-25587 | Brand: Waveshare

The Waveshare OLED/LCD HAT (A) combines a 2-inch IPS LCD main screen with dual 0.96-inch blue OLED secondary screens on a single Raspberry Pi HAT. It's ideal for displaying system stats, status indicators, and small g...

SKU: DF-DFR0975 | Brand: DFRobot

FireBeetle 2 ESP32-S3 is a high-performance main controller built around the ESP32-S3-WROOM-1-N16R8 module. ESP32-S3-WROOM-1-N16R8 comes with 16MB Flash and 8MB PSRAM for storing more data. The acceleration for neural...

SKU: AF-5710 | Brand: Adafruit

The Feather RP2040 with DVI Output lets you drive an HDMI monitor or television directly from a microcontroller. The on-board HDMI connector outputs digital video (DVI) at 640×480 or 800×480 resolution using the RP204...

SKU: AF-5662 | Brand: Adafruit

A 10-pack of two-part relegendable keycaps in black, compatible with Cherry MX and MX-compatible key switches. Each keycap has a black base and a clear snap-on cover — simply slip a sticker, label, or piece of paper u...

SKU: MD-B0180 | Brand: Makedo

A bulk top-up pack of 180 Makedo SCRU connectors — the cornerstone of the Makedo cardboard construction system. Each SCRU can connect up to three layers of corrugated cardboard, holding creations together quickly and ...

SKU: DF-SEN0529 | Brand: DFRobot

BMM150 is a low-power and low-noise 3-axis geomagnetic sensor from Bosch for compass applications. It allows measurements of the magnetic field and compass angle in three perpendiculars within a measuring range of ±13...

SKU: AF-5643 | Brand: Adafruit

The Adafruit SPI FLASH Breakout features a W25Q128 chip providing 128 Mbit (16 MByte) of non-volatile flash storage over a standard SPI interface. It's ideal for adding compact, low-power external storage to microcont...

SKU: AF-5463 | Brand: Adafruit

This rubber sheet is made of the same carbon-black impregnated rubber material that our conductive rubber cord uses. Traditionally it would be used for EMF shielding, or conductive gaskets - but it's very fun to play ...

SKU: DF-MBT0021-EN-18650 | Brand: DFRobot

Note: micro:bit board and batteries are not included. What’s new in Maqueen Plus V2? 1. This is the 18650 battery version 2. New plastic box with a deeper base, enough room for the assembled car 3. Frosted acrylic p...

SKU: SF-CAB-19717 | Brand: SparkFun

A USB-C to USB-C cable with a built-in LCD display that shows real-time power draw — so you can see exactly how much power your device is pulling. Supports up to 100W USB PD (Power Delivery) at 5A, with USB 2.0 data t...

SKU: DF-FIT0816 | Brand: DFRobot

A compact cooling kit for the Raspberry Pi 3B, 3B+, and 4B featuring an aluminium heatsink with a built-in 9-blade cooling fan. The heatsink surface is designed with slots to maximise heat dissipation, while the fan p...