All Products

SKU: SF-COM-12986 | Brand: SparkFun

We know these look like a lot of our other LEDs, but they’re not! These are PTH Addressable RGB LEDs with a WS2812 control IC built right into the them. This PTH version is incredibly similar to its SMD cousin, except...

SKU: AF-3328 | Brand: Adafruit

The Adafruit PT100 RTD Temperature Sensor Amplifier is a breakout board for the MAX31865 precision RTD-to-digital converter. It reads 2-, 3-, or 4-wire PT100 platinum resistance temperature detectors over SPI, deliver...

SKU: DF-TEL0094 | Brand: DFRobot

You must have used a GPS receiver. It is easy to be found in most places, such as smartphones, cars, and computers. They are used to track your loaction all over the globe. GPS Receiver for Arduino is a unit embed...

SKU: AF-954 | Brand: Adafruit

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - ...

SKU: SF-PRT-10288 | Brand: SparkFun

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive female barrel jack. If you have a power supply with a barrel jack an...

SKU: DF-DFR0429 | Brand: DFRobot

INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecti...

SKU: DF-SEN0204 | Brand: DFRobot

A non-contact liquid level sensor that detects the presence of liquid through a container wall — no direct contact with the liquid required. Using advanced signal processing via the XKC-Y25-T12V chip, it works through...

SKU: DF-SEN0206 | Brand: DFRobot

INTRODUCTION We can divide temperature measurement in to two types: contact and non-contact. Contact measurement can only accurately measure temperature when the testing object and the se...

SKU: AF-3333 | Brand: Adafruit

The Circuit Playground Express is an all-in-one development board packed with sensors, LEDs, and a speaker — all on a round, beginner-friendly PCB with alligator-clip pads. No soldering required. It supports four prog...

SKU: DF-DFR0071 | Brand: DFRobot

The DFRobot SD Module (DFR0071) is a breakout board that adds standard SD and Micro SD (TF) card storage to your Arduino projects. Use it for data logging, file storage, and transferring data between your microcontrol...

SKU: AF-3487 | Brand: Adafruit

This 30mm translucent green arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with resistors are embedded in the button body, ready to light up from a microcontroller pin or dire...

SKU: AF-3562 | Brand: Adafruit

If you're looking to make a custom cable with any two of our HDMI adapters, then you'll need to have these flex cables handy!&nbsp;Making custom&nbsp;HDMI cables has never been easier. Just grab one of these cables...

SKU: EF-EF04097 | Brand: ElecFreaks

The Octopus Capacitive Soil Moisture Sensor uses capacitive sensing to detect soil moisture levels, avoiding the corrosion problems common with resistive sensors for a much longer service life. It outputs an analogue ...

SKU: LB-LS4437 | Brand: Little Bird

A festive DIY soldering kit that assembles into a two-sided LED Christmas tree, complete with a clear acrylic display case. Perfect for beginners learning to solder or hobbyists who enjoy seasonal electronics projects...

SKU: WS-31199 | Brand: Waveshare

ESP32-S3 1.47inch Touch Display Development BoardUnleash your creative potential and dive into the world of IoT development with the remarkable ESP32-S3 1.47inch Touch Display Development Board. This cutting-edge plat...

SKU: WS-31197 | Brand: Waveshare

ESP32-S3 1.64" AMOLED Touch Display Development BoardUnlock the potential for innovative smart applications with the cutting-edge ESP32-S3 1.64" AMOLED Touch Display Development Board. Its high-resolution display comb...

SKU: EF-EF08314 | Brand: ElecFreaks

Smart Climate Kit is an innovative product designed based on micro:bit V2 and IOT:bit expansion board. Equipped with a variety of sensors such as wind speed sensor, temperature and humidity sensor, UV sensor, dust se...

SKU: WS-25742 | Brand: Waveshare

A 2.42″ monochrome OLED display module from Waveshare with 128 × 64 resolution, driven by the SSD1309 controller. It supports both 4-wire SPI and I2C interfaces with an onboard voltage translator, and Waveshare provid...

SKU: WS-25587 | Brand: Waveshare

The Waveshare OLED/LCD HAT (A) combines a 2-inch IPS LCD main screen with dual 0.96-inch blue OLED secondary screens on a single Raspberry Pi HAT. It's ideal for displaying system stats, status indicators, and small g...

SKU: DF-DFR0975 | Brand: DFRobot

FireBeetle 2 ESP32-S3 is a high-performance main controller built around the ESP32-S3-WROOM-1-N16R8 module. ESP32-S3-WROOM-1-N16R8 comes with 16MB Flash and 8MB PSRAM for storing more data. The acceleration for neural...