All Products

SKU: AF-1648 | Brand: Adafruit

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display, for a different size. Works great, just carefully open the connect...

SKU: DF-FIT0117 | Brand: DFRobot

An assortment of 100 aluminium electrolytic capacitors across 12 common values, ranging from 1µF to 470µF. A handy kit for prototyping, decoupling, and general-purpose circuit building — covers the most frequently use...

SKU: DF-FIT0154 | Brand: DFRobot

These high-quality breadboard jumper cables are made with 22 AWG multi-strand wire and sturdy male pins on both ends. Each cable is approximately 214 mm long and comes in assorted colours for easy circuit identificati...

SKU: DF-FIT0266 | Brand: DFRobot

A 6×AA battery holder with bare wire leads for creating 7.2V rechargeable battery packs (NiMH/NiCd) or 9V packs from alkaline cells. The holder features side-by-side cell placement and comes with 150mm red and black w...

SKU: SF-COM-00102 | Brand: SparkFun

Simple SPDT slide switch. Rated at 30V/200mA. The pins have .1" spacing - fits great into a breadboard! Use it as a power switch or general control switch.

SKU: AF-354 | Brand: Adafruit

Need a big battery for your project? This lithium ion pack is made of 2 balanced 2200mAh cells for a total of 4400mA capacity! The cells are connected in parallel and spot-welded to a protection circuit that provid...

SKU: SF-PRT-11026 | Brand: SparkFun

If you need to knock up a quick prototype there’s nothing like having a pile of jumper wires to speed things up, and let’s face it: sometimes you want quantity over quality. These are the same jumper wires that com...

SKU: SF-PRT-12796 | Brand: SparkFun

These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board, to any other male header. Combine these with our male to male jumpers to create a male to f...

SKU: AF-1980 | Brand: Adafruit

The Adafruit TSL2591 is an ultra-high-range digital light sensor with a massive 600,000,000:1 dynamic range. It features both infrared and full-spectrum photodiodes, allowing you to separately measure infrared, full-s...

SKU: AF-3405 | Brand: Adafruit

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converte...

SKU: AF-830 | Brand: Adafruit

A 4×AA battery holder with a snap-on cover and built-in on/off switch. Holds four AA batteries in series, outputting a nominal 6V (alkaline) or 4.8V (NiMH), making it a convenient portable power source for 5V microcon...

SKU: AF-1954 | Brand: Adafruit

These Female/Male Extension jumper wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 20 (2 pieces of ea...

SKU: AF-3560 | Brand: Adafruit

A 10cm (~4″) flexible HDMI ribbon cable for building custom HDMI connections with DIY HDMI adapters. Simply clip any two compatible HDMI plug adapters onto each end of the ribbon cable to create the exact cable config...

SKU: WS-30934 | Brand: Waveshare

Unleash Your Creativity with the ESP32-S3 3.5inch Touch Display Development BoardTransform your innovative projects with the ESP32-S3 3.5inch Capacitive Touch Display Development Board – a versatile and powerful addit...

SKU: PI-PIM724 | Brand: Pimoroni

A top of the line Pirate-brand RP2350 microcontroller with 16MB of flash memory, 8MB of PSRAM, USB-C, Qw/ST and debug connectors.We adore the versatility and value of Raspberry Pi Pico but we also enjoy a souped up RP...

SKU: KS-KS0576 | Brand: Keyestudio

Introducing the Smart Eco-Friendly House Starter Kit for Arduino, the perfect way to learn about automated and intelligent management while also promoting eco-friendliness. This kit utilizes multiple sensors and modul...

SKU: DF-DFR0181 | Brand: DFRobot

This is the new Arduino Uno Rev 3. In addition to all the features of the previous board, the arduino Uno Rev 3 now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). T...

SKU: WS-26541 | Brand: Waveshare

Unlock the full potential of IoT development with the cutting-edge ESP32-S3 Development Board, your all-in-one solution for creating interactive and smart connected devices. This powerhouse board is designed by Wavesh...

SKU: WS-26462 | Brand: Waveshare

A programmable 3-key macro keyboard powered by the RP2040 microcontroller. Out of the box, the keys are mapped to Ctrl, C, and V — the essential copy-paste combo for programmers — but all three keys can be reprogramme...

SKU: WS-25512 | Brand: Waveshare

A 1.54-inch OLED display module with 128×64 resolution and white pixels on a black background. Built around the SSD1309 driver chip, it supports both 4-wire SPI and I2C interfaces and includes an onboard voltage trans...