All Products

SKU: LB-LS1017-60 | Brand: Little Bird

The GA25-370 is a compact 12V DC gear motor with metal gears and a built-in speed encoder for closed-loop control. This 60 RPM variant uses a higher gear ratio for increased torque at lower speed, making it well-suite...

SKU: EF-EF08296 | Brand: ElecFreaks

SKU: DF-DFR0946 | Brand: DFRobot

A DC-DC buck-boost converter module that accepts input voltages both higher and lower than the desired output, delivering a stable regulated output up to 5A. Two onboard potentiometers let you set the output voltage a...

SKU: EC-RPA13810C | Brand: Elecrow

I am a Raspberry Pi camera that compatible with any version of Raspberry Pi. I can work with infrared lights, support infrared night vision. Even has the function of focus, you can adjust me to observe objects of diff...

SKU: DF-DFR0140 | Brand: DFRobot

This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard. It can be either powered from 6-12...

SKU: SF-ROB-11696 | Brand: SparkFun

This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things like making a fan or spinning something pretty fast without much res...

SKU: SF-COM-10969 | Brand: SparkFun

Resistors are a good thing, in fact, they’re actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you’re gonna have the res...

SKU: AF-527 | Brand: Adafruit

Professional-quality wire strippers from Hakko, designed for clean, precise stripping of 20–30 AWG wire. Precision-ground notches strip insulation cleanly without nicking the conductor, and soft rounded grips provide ...

SKU: SF-PRT-12795 | Brand: SparkFun

These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Combine these with our female to female jumpers to create a mal...

SKU: AF-3367 | Brand: Adafruit

The Mini USB Microphone is an ultra-compact plug-and-play USB microphone that requires no drivers. Simply plug it into any USB port and start recording immediately. Compatible with Raspberry Pi, laptops, desktops, an...

SKU: SF-COM-09609 | Brand: SparkFun

This is a simple SPDT slide switch - great for use as an ON/OFF button, or just as a general control switch. The pins are spaced by 0.1", however they are incredibly thin making breadboard use not recommended. The swi...

SKU: DF-FIT0980 | Brand: DFRobot

Keep your Raspberry Pi 5 running cool with this aluminium alloy cooling fan. Designed for the Pi 5's dedicated fan interface, it plugs in directly via a 4-pin JST connector — no complicated setup required. Self-locki...

SKU: LB-1601104 | Brand: Little Bird

USB C to 3.5mm Audio Headphone Jack DAC Adapter OverviewThe USB C to 3.5mm Audio Headphone Jack DAC Adapter is your go-to solution for connecting traditional 3.5mm audio devices to modern USB-C devices without a headp...

SKU: PI-PIM721 | Brand: Pimoroni

The Tiny 2350 is a postage-stamp-sized development board powered by the RP2350A — a dual ARM Cortex-M33 running at up to 150 MHz with 520 KB SRAM and 4 MB of QSPI flash. It's programmable via USB-C with C/C++ or Micro...

SKU: LB-00191-20 | Brand: Little Bird

A classroom-ready bulk pack of 20 BBC micro:bit v2.2 boards. Each micro:bit features a built-in speaker, microphone, touch sensor, accelerometer, compass, Bluetooth, and a 5×5 LED matrix — everything students need to ...

SKU: DF-DFR1054 | Brand: DFRobot

ESP32-C6-DevKitC-1 is an entry-level development board based on ESP32-C6-WROOM-1, a general-purpose module with an 8 MB SPI flash. This board integrates complete Wi-Fi, Bluetooth LE, Zigbee, and Thread functions. Most...

SKU: WS-21176 | Brand: Waveshare

A premium aluminium enclosure for the Raspberry Pi 4, featuring a stripe-grooved design on both top and bottom halves that enlarges the heat dissipation area for effective passive cooling. Built-in heatsink pillars ma...

SKU: DF-FIT0701 | Brand: DFRobot

This product is a driver-free camera with 30W pixels and 640*480 resolution. The camera is well compatible with both Raspberry Pi and NVIDIA series mainboards. Just plug it in, and you’re good to go!The compact size o...

SKU: AF-4669 | Brand: Adafruit

Here's one of the easiest capture solutions for getting HDMI data into your computer or Raspberry Pi, really any system with a USB port. Use this capture device to convert a video signal from a camera (or another dev...

SKU: EC-MCS02930M | Brand: Elecrow

This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive ...