All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Tiny 2350
SKU: PI-PIM721 | Brand: Pimoroni
The Tiny 2350 is a postage-stamp-sized development board powered by the RP2350A — a dual ARM Cortex-M33 running at up to 150 MHz with 520 KB SRAM and 4 MB of QSPI flash. It's programmable via USB-C with C/C++ or Micro...
Delivered by Wed 5 Aug
Pan/Tilt Bracket Kit (Single Attachment)
SKU: SF-ROB-14391 | Brand: SparkFun
This is an easy-to-assemble pan/tilt bracket kit that utilizes servos to move on two axes fit for camera and helping-hand applications. This particular bracket kit is the same one we use in our SparkFun Raspberry P...
Delivered by Wed 5 Aug
Smart Eco-Friendly House Starter Kit For Arduino
SKU: KS-KS0576 | Brand: Keyestudio
Introducing the Smart Eco-Friendly House Starter Kit for Arduino, the perfect way to learn about automated and intelligent management while also promoting eco-friendliness. This kit utilizes multiple sensors and modul...
Delivered by Wed 5 Aug
Waveshare RP2040-PiZero Development Board, Based On The Raspberry Pi RP2040 Dual-core Processor, 264KB SRAM And 16MB Onboard Flash Memory
SKU: WS-25506 | Brand: Waveshare
Waveshare RP2040-PiZero Development Board, Based On The Raspberry Pi RP2040 Dual-core Processor, 264KB SRAM and 16MB onboard Flash memory, compatible with Raspberry Pi 40PIN GPIO header RP2040-PiZero Development Bo...
Delivered by Wed 5 Aug
ELECFREAKS Mechanical Catch (Use With Cutebot)
SKU: EF-EF10159 | Brand: ElecFreaks
ELECFREAKS Mechanical Catch (Use With Cutebot) is a gripper that uses an SG92R servo as a power source. The servo uses a PWM signal to drive the gripper gear to rotate and control the gripper for clamping and releasin...
Delivered by Wed 5 Aug
L9110H H-Bridge Motor Driver for DC Motors - 8 DIP - 2.5V-12V 800mAh
SKU: AF-4489 | Brand: Adafruit
Run two solenoids, or a single DC motor with up to 800mA per channel using the super-simple L9110H H-bridge driver. This bridge chip is an 8 DIP package so it's easy to fit onto any breadboard or perfboard.Each chip c...
Delivered by Wed 5 Aug
9G All-Metal Micro Servo – 180° Rotation
SKU: LB-LS7259-180 | Brand: Little Bird
A durable 9G micro servo with full metal gears and 180° rotation. Designed for WPL and MN series RC vehicles and custom robotics projects, it delivers reliable performance and long service life in compact builds. Key...
Delivered by Wed 5 Aug
Maxbotix Ultrasonic Rangefinder - LV-EZ0 [LV-EZ0]
SKU: AF-979 | Brand: Adafruit
The LV-EZ0 from MaxBotix is a compact ultrasonic rangefinder providing short to long-range detection. It can detect objects from 0 to 254 inches (6.45 m) and provides calibrated range information from 6 inches out to ...
Delivered by Wed 5 Aug
9G All-Metal Micro Servo – 360° Rotation
SKU: LB-LS7259-360 | Brand: Little Bird
A durable 9G micro servo with full metal gears and 360° continuous rotation. Designed for WPL and MN series RC vehicles and custom robotics projects, it delivers reliable performance and long service life in compact b...
Delivered by Wed 5 Aug
High Torque Waterproof Metal Gear Digital Servo (20KG, 180°, IP54)
SKU: DF-SER0063 | Brand: DFRobot
##Introduction This is an extraordinary water-resistant digital servo with formidable torque, possessing a torque capacity of 20kg and a controllable angle of 180 degrees. It exhibits enhanced linear motion and featur...
Delivered by Wed 5 Aug
Adafruit RP2040 Feather ThinkInk for 24-pin E-Paper Display
SKU: AF-5727 | Brand: Adafruit
The Adafruit RP2040 Feather ThinkInk makes it easy to connect almost any common e-Paper/e-Ink display with a standard 24-pin FPC connector. E-paper displays retain their image even when power is completely disconnecte...
Delivered by Wed 5 Aug
Octopus Passive buzzer Brick OBPB01
SKU: EF-EF04031 | Brand: ElecFreaks
The Octopus Passive Buzzer Brick is a plug-and-play buzzer module from the Elecfreaks Octopus series. Unlike an active buzzer, the passive design lets you control both tone and volume via PWM, making it ideal for gene...
Delivered by Wed 5 Aug
Pololu Dual G2 High-Power Motor Driver 24v14 for Raspberry Pi (Assembled)
SKU: PL-3753 | Brand: Pololu
The Pololu Dual G2 High-Power Motor Driver 24v14 is a Raspberry Pi expansion board that can independently control two brushed DC motors at up to 14A continuous per channel. It mounts directly onto the Pi's 40-pin GPIO...
Delivered by Wed 5 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared