All Products

SKU: SF-PRT-17252 | Brand: SparkFun

The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80, right angle, PTH pins. Add this part to your board to create a handy...

SKU: SF-DEV-17047 | Brand: SparkFun

The SparkFun Qwiic GPIO adds eight additional digital I/O pins to your project via I2C, based on the TCA9534 I/O Expander from Texas Instruments. Read and write pins just like standard Arduino digital pins using the i...

SKU: AF-4693 | Brand: Adafruit

ESP32-S2 Saola-1 is a small-sized ESP32-S2 based development board produced by Espressif. Just about all of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either conn...

SKU: EC-DTS02078B | Brand: Elecrow

This is a GPIO expansion board for Micro: bit. It completely compatible with the Micro: bit and respectively extended the UART port and IIC port. It can make it easy for you to use the extenal pins of the Micro: bi...

SKU: PR-PIM330 | Brand: Little Bird

Fit a pHAT to your Raspberry Pi Zero without soldering! These spring-loaded pogo pins provide a reliable electrical contact between your Pi Zero and pHAT, making it quick and easy to swap boards between projects with ...

SKU: PI-RPI-020 | Brand: Pimoroni

The Official Raspberry Pi Zero Case is designed to fit both the Pi Zero and Pi Zero W. It ships with three interchangeable lids so you can configure it for different use cases: a plain lid for a clean finish, a GPIO l...

SKU: PR-PIM171 | Brand: Little Bird

A handy breakout tool that lets you access all 40 GPIO pins while a HAT or pHAT is connected to your Raspberry Pi. Plug in your HAT, connect the ribbon cable to your Pi, and probe, debug, or extend any pin with ease. ...

SKU: DF-DFR0031-G | Brand: DFRobot

This is a Piranha LED light module. A digital pin (LOW on, HIGH off) is used to control it. The brightness of LED can be controller via PWM output. APPLICATIONS DIY Projects Toys Games Audio indicator SPECIFICATIONS...

SKU: DF-DFR0238 | Brand: DFRobot

This small size breakout is programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It is designed to allow the easy addition of dynamic indicators, displays, and lig...

SKU: PL-1137 | Brand: Pololu

The GP2Y0A02 is the longest-range optical distance sensor we carry, featuring a detection range of 8″ to 60″ (20 cm to 150 cm). The high maximum detection distance makes this sensor a viable alternative to ...

SKU: AF-381 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC ...

SKU: PL-837 | Brand: Pololu

The Vishay TSOP34156 is a general-purpose modulated IR receiver for IR-based remote-control projects. It features a wide operating voltage range and allows for relatively high data rates; this particular unit is tune...

SKU: EC-ACC35076R | Brand: Elecrow

This video tank robot vehicle uses ESP32 as the main board, with OV2640 camera, and can control the movement via WiFi. It has a digital microphone interface, which can adjust the volume. The APP can control the shooti...

SKU: WS-26837 | Brand: Waveshare

The RaspRover is an open-source, four-wheel-drive AI robot platform powered by a dual-controller architecture. A Raspberry Pi 4B or 5 (not included) handles high-level AI processing and computer vision, while an onboa...

SKU: WS-29962 | Brand: Waveshare

Unleash Your Creativity with the Vibrant ESP32-S3 1.3-inch Display Development BoardAre you ready to elevate your project with a splash of color and advanced functionality? The ESP32-S3 1.3-inch Display Development Bo...

SKU: WS-31159 | Brand: Waveshare

This compact development board from Waveshare combines the Raspberry Pi RP2350A microcontroller with a built-in 1.47″ LCD display, TF card slot, and RGB LED — all in a tiny form factor with pre-soldered headers and US...

SKU: WS-30581 | Brand: Waveshare

Elevate Your Raspberry Pi Projects with the Versatile Nano Base Board (B) for Compute Module 5Unleash the full potential of your Raspberry Pi Compute Module 5 (CM5) with the compact yet powerful Nano Base Board (B). D...

SKU: EC-DTS02018B | Brand: Elecrow

This expansion board is an IO port expansion board that supports micro: bit. It can draw out all resources on the micro: bit and also comes with a buzzer. By connecting the jumper cap to the P0 pin, the P0 pin can be ...

SKU: AF-5906 | Brand: Adafruit

The Adafruit Proto Doubler PiCowbell gives your Raspberry Pi Pico or Pico W two side-by-side socket slots — plug in your Pico on one side and a PiCowbell accessory on the other, no soldering or stacking headers requir...

SKU: SF-COM-23979 | Brand: SparkFun

Does your microcontroller need to control a high-voltage item, like a 12V LED strip, while also needing to be powered? Do you want to avoid having multiple power adapters and microcontrollers for your project? The MOS...