All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
SparkFun Load Cell Amplifier - HX711
SKU: SF-SEN-13879 | Brand: SparkFun
The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the...
Delivered by Fri 12 Jun
IR Sensor Module
SKU: LB-OWL-IR | Brand: Little Bird
An infrared receiver module that can read signals from most standard IR remote controls. Useful for adding remote control functionality to Arduino and microcontroller projects. Pair with an IR transmitter module to bu...
Delivered by Fri 12 Jun
Mini PIR Motion Sensor
SKU: LB-LS0869 | Brand: Little Bird
The AM312 sensor is a mini IR pyroelectric infrared PIR motion human body sensor that is easy to install and has low power consumption. Its digital signal processing and high sensitivity make it ideal for use in au...
Delivered by Fri 12 Jun
UV Ultraviolet Ray Detection Sensor
SKU: LB-LS2299 | Brand: Little Bird
A UV detection sensor module that measures ultraviolet light intensity in the 200–370 nm wavelength range. The analogue output (0–1 V DC) is proportional to the UV Index, making it suitable for measuring UV exposure i...
Delivered by Fri 12 Jun
Adafruit Micro SD SPI or SDIO Card Breakout Board - 3V ONLY!
SKU: AF-4682 | Brand: Adafruit
The Adafruit Micro SD SPI or SDIO Card Breakout Board gives you fast microSD card access using either standard SPI or the higher-speed SDIO protocol. Unlike SPI-only breakouts, this board exposes the full SDIO bus wit...
Delivered by Fri 12 Jun
WiFi Module ESP8266 ESP-01
SKU: LB-LR0307 | Brand: Little Bird
Upgraded Version ESP-01,all Flash are upgraded to 1M byte.Also support Cloud service remote transmission.This Upgraded Version module are fully supports the previous firmware The latest firmware version 1.0.1, the ...
Delivered by Fri 12 Jun
Raspberry Pi GPIO Expansion Extension Board Screw Terminal Hat
SKU: LB-LS7233 | Brand: Little Bird
Upgrade your Raspberry Pi experience with our GPIO Expansion Extension Board Screw Terminal Hat! This beautifully designed screw terminal expansion version is the perfect addition to your electronic experiments. Conve...
Delivered by Fri 12 Jun
10DOF Module MPU6050 HMC5883L BMP180 GY87 Sensor Module
SKU: LB-LS5114 | Brand: Little Bird
The GY-87 is a 10 degrees-of-freedom (10DOF) sensor module that combines three chips on a single compact board: the MPU6050 (3-axis gyroscope + 3-axis accelerometer), HMC5883L (3-axis magnetometer), and BMP180 (barome...
Delivered by Fri 12 Jun
DC-DC 12V To 3.3V 5V Buck Step down Power Supply Module For Arduino
SKU: LB-LR0214-142A | Brand: Little Bird
One input: DC 6V - 12V (input voltage to the output voltage must be higher than 1V.) Output: 3.3V (+ - 0.05v error), 5.0V (+ - 0.05v error), 800mA (load current can not exceed 800ma), 12V (12V input directly conv...
Delivered by Fri 12 Jun
I2C 20x4(2004) LCD Display for Arduino
SKU: DF-DFR0154 | Brand: DFRobot
A 20×4 character I2C LCD display module compatible with Arduino and other microcontrollers. It shows white characters on a blue backlit background, and the I2C interface means you only need two data pins (SDA and SCL)...
Delivered by Fri 12 Jun
DC-DC Multi-output Buck Converter (3.3V/5V/9V/12V)
SKU: DF-DFR1015 | Brand: DFRobot
Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required.This DC-DC step-down voltage power module converts 7.5V~30V input to an output of 3.3V/5V/9...
Delivered by Fri 12 Jun
Sonar:bit for micro:bit Ultrasonic Sensor Distance Measuring 3V/5V
SKU: EF-EF04089 | Brand: ElecFreaks
Sonar:bit is a 3-wire ultrasonic distance sensor designed for micro:bit and Arduino projects. Operating on 3–5V, it works directly with both 3.3V and 5V systems using a single GVS cable — saving an I/O port compared t...
Delivered by Fri 12 Jun
Arduino Infra-red obstacle sensor
SKU: LB-LR0006 | Brand: Little Bird
The infrared obstacle sensor is a compact IR proximity module designed for robotics and automation projects. It detects obstacles within a 2–40 cm range and outputs a TTL-level signal, making it easy to integrate with...
Delivered by Fri 12 Jun
Capacitive Touch Sensor for Arduino
SKU: LB-LR0214-47 | Brand: Little Bird
This is a touch sensor for Arduino. This sensor is a toggle output type: touch-on then touch-off. Onboard TTP223 touch capacitive touch sensor IC. With an on-board-level status indicator. Wor...
Delivered by Fri 12 Jun
Pico - 10DOF-IMU IC Test Board
SKU: WS-19358 | Brand: Waveshare
A 10-DOF IMU sensor expansion board designed for the Raspberry Pi Pico. Combines a 9-axis ICM20948 motion sensor (gyroscope, accelerometer, magnetometer) with an LPS22HB barometric pressure sensor, all communicating o...
Delivered by Fri 12 Jun
RS232 To TTL Converter Module MAX3232
SKU: EC-CIN3232RT | Brand: Elecrow
This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port....
Delivered by Fri 12 Jun
DC-DC Buck Boost Converter Module (5A)
SKU: DF-DFR0946 | Brand: DFRobot
A DC-DC buck-boost converter module that accepts input voltages both higher and lower than the desired output, delivering a stable regulated output up to 5A. Two onboard potentiometers let you set the output voltage a...
Delivered by Fri 12 Jun
MLX90640 Thermal Camera Breakout - Standard (55°)
SKU: PR-PIM365 | Brand: Little Bird
A sophisticated, hackable, 32x24 pixel thermal camera breakout! Use it to monitor the temperature of your CPU or coffee pot, or to build your own heat-seeking night vision camera. Works with Raspberry Pi or Ardu...
Delivered by Fri 12 Jun
VL53L1X Time of Flight (ToF) Sensor Breakout
SKU: PR-PIM373 | Brand: Little Bird
The VL53L1X Time of Flight sensor breakout uses a low-power laser to measure distances with excellent accuracy and speed. With a detection range of 4 cm to 4 metres and up to 50 Hz sampling frequency, it's ideal for p...
Delivered by Fri 12 Jun
Little Bird Toucan 8 x APA102 RGB LED
SKU: LB-TOUCAN | Brand: Little Bird
The Little Bird Toucan is an smart RGB LED HAT designed for the Raspberry Pi!Based on the APA102, the Toucan packs 8 super-bright LEDs.Each of the LEDs are dimmable, and individually controllable (Raspberry Pi Rain...
Delivered by Fri 12 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
